• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.346-346
• /
• 2020

홍수기 효과적인 하천관리를 위해서는 광역 모니터링을 위한 기술 확보가 매우 중요하며, 최근 드론을 활용한 하천 모니터링에 관한 관심이 점차 증가되고 있다. 하천관리에 필요한 드론 탑재용 센서는 기본적으로 RGB 광학센서를 비롯하여 근적외선(Nir) 및 열적외선 센서가 함께 운용되는 것이 효과적이다. 그러나 현재 판매되는 드론 카메라를 살펴보면 근적외선과 열적외선 센서가 별도로 분리되어 있고 광학센서에 비해 상대적으로 매우 고가로 판매되고 있는 실정이다. 따라서 하천 모니터링을 위해서는 광학(RGB), 근적외선 그리고 열적외선 센서가 통합된 저가의 탑재체 개발이 시급하고 이를 활용한 하천 모니터링 프로세스를 정립할 필요가 있다. 본 연구에서는 일반 드론에 쉽게 탑재 가능한 하천 모니터링용 탑재체를 개발하였으며, 이를 기반으로 하천 홍수 및 부유사 모니터링에 활용하였다. 광학센서는 하천의 주요 형상을 확인하는데 이용하였으며, 근적외선 센서는 홍수 및 부유사 탐지에 활용하였다. 특히 본 연구에서는 비교적 넓은 하천 구역에 대한 공간정보를 구축하기 위해 75% 이상의 중복도를 가지고 촬영하도록 세팅하였으며 영상접합 SW를 활용하여 정사영상을 생성하였다. 구축한 근적외선 정사영상으로부터 영상분석 프로그램을 활용하여 홍수 및 부유사 영역을 추출하였으며 이를 통해 홍수기 하천 모니터링 및 치수 업무 의사결정을 위한 정보를 제공할 수 있었다. 저가용 드론 센서는 상용 SW와의 연계가 어렵기 때문에 자동비행 프로그램처럼 해당 위치별 영상 촬영이 어려운 한계가 있었으며, 본 연구에서는 센서의 제원특성을 활용하여 자동비행 SW에서도 일정 이상의 중복도를 확보할 수 있는 비행고도별 촬영시간 등을 종합적으로 설계하였다. 이를 통해 해당 지역에 대한 하천 모니터링용 정사영상을 구축할 수 있었으며 기존의 고가용 드론 센서와 유사한 효과를 가져올 수 있었다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.25 no.1
• /
• pp.71-78
• /
• 2017

Many studies have been implemented to manage solar plant being supplied widely in recent years. This study analyzed heat emission of solar cell using unmanned aerial vehicle(UAV)-based thermal infrared sensor, and major conclusions are as belows. Firstly, orthomosaic image and digital surface model(DSM) data were acquired using UAV-based RGB sensor, and solar light module layer necessary to analyze the heat emission of solar cell was constructed by these data. Also as a result of horizontal error into validation points using virtual reference service(VRS) survey for evaluating the location accuracy of solar light module layer, higher location accuracy could be acquired like standard error of $dx={\pm}2.4cm$ and $dy={\pm}3.2cm$. And this study installed rubber patch to test the heat emission of solar cell and could analyzed efficiently the location of rubber patch being emitted heat using UAV-based thermal infrared sensor. Also standard error showd as ${\pm}3.5%$ in analysis between calculated cell ratio by rubber patch and analyzed cell ratio by UAV-based thermal infrared sensor. Therefore, it could be efficiently analyzed to heat emission of solar cell using UAV-based thermal infrared sensor. Also efficient maintenance of solar plant could be possible through extracting the code of solar light module being emitted of heat automatically.

• Korean Journal of Remote Sensing
• /
• v.30 no.6
• /
• pp.797-807
• /
• 2014

The Sea Surface Temperature (SST) is one of the most important oceanic environmental factors in determining the change of marine environments and ecological activities. Satellite thermal infrared images can be effective for understanding the global trend of sea surface temperature due to large scale. However, their low spatial resolution caused some limitations in some areas where complicated and refined coastal shapes due to many islands are present as in the Korean Peninsula. The coastal ocean is also very important because human activities interact with the environmental change of coastal area and most aqua farming is distributed in the coastal ocean. Thus, low-cost airborne thermal infrared remote sensing with high resolution capability is considered for verifying its possibility to extract SST and to monitor the changes of coastal environment. In this study, an airborne thermal infrared system was implemented using a low-cost and ground-based thermal infrared camera (FLIR), and more than 8 airborne acquisitions were carried out in the western coast of the Korean Peninsula during the periods between May 23, 2012 and December 7, 2013. The acquired thermal infrared images were radiometrically calibrated using an atmospheric radiative transfer model with a support from a temperature-humidity sensor, and geometrically calibrated using GPS and IMU sensors. In particular, the airborne sea surface temperature acquired in June 25, 2013 was compared and verified with satellite SST as well as ship-borne thermal infrared and in-situ SST data. As a result, the airborne thermal infrared sensor extracted SST with an accuracy of $1^{\circ}C$.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.1
• /
• pp.81-88
• /
• 2015

Various satellite sensors having ranges of the visible, infrared, and thermal wavelengths have been launched due to the improvement of hardware technologies of satellite sensors development. According to the development of satellite sensors with various wavelength ranges, the fusion and integration of multisensor images are proceeded. Image matching process is an essential step for the application of multisensor images. Some algorithms, such as SIFT and SURF, have been proposed to co-register satellite images. However, when the existing algorithms are applied to extract matching points between optical and thermal images, high accuracy of co-registration might not be guaranteed because these images have difference spectral and spatial characteristics. In this paper, location of control points in a reference image is extracted by SURF, and then, location of their corresponding pairs is estimated from the correlation of the local similarity. In the case of local similarity, phase correlation method, which is based on fourier transformation, is applied. In the experiments by simulated, Landsat-8, and ASTER datasets, the proposed algorithm could extract reliable matching points compared to the existing SURF-based method.

• Journal of Environmental Impact Assessment
• /
• v.24 no.4
• /
• pp.367-374
• /
• 2015

To examine the effect of thermal discharge from nuclear power plants, Sea Surface Temperature (SST) is one of the most important variables measured by satellite remote sensing. However, the study was not much comparison of field data and satellite SST from operational Landsat 8 Thermal Infrared Sensor(TIRS) and Landsat 7 ETM+. The Landsat 8 TIRS have 2 spilt Thermal Infrared channels but ETM+ uses one channel for extracting of SST. In spite of that this research carried out that Landsat 7 ETM+ have more profitable for correction of SST than Landsat 8 TIRS. The used 15 Landsat 7 and 8 Thermal Infrared data of path/row 114-36 were processed by SST algorithm of ENVI and IDL. The in-situ SST data from KHOA(Korea Hydrographic and Oceanographic Administration) compared with satellite SST and the accuracy of extracted SST were assessed by each field sites in-situ point data with time series satellite SST.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.4
• /
• pp.263-270
• /
• 2018

Land surface temperature is known to be an important factor in understanding the interactions of the ground-atmosphere. However, because of the large spatio-temporal variability, regular observation is rarely made. The existing land surface temperature is observed using satellite images, but due to the nature of satellite, it has the limit of long revisit period and low accuracy. In this study, in order to confirm the possibility of replacing land surface temperature observation using satellite imagery, images acquired by TIR (Thermal Infrared) sensor mounted on UAV (Unmanned Aerial Vehicle) are used. The acquired images were transformed from JPEG (Joint Photographic Experts Group) to TIFF (Tagged Image File Format) format and orthophoto was then generated. The DN (Digital Number) value of orthophoto was used to calculate the actual land surface temperature. In order to evaluate the accuracy of the calculated land surface temperature, the land surface temperature was compared with the land surface temperature directly observed with an infrared thermometer at the same time. When comparing the observed land surface temperatures in two ways, the accuracy of all the land covers was below the measure accuracy of the TIR sensor. Therefore, the possibility of replacing the satellite image, which is a conventional land surface temperature observation method, is confirmed by using the TIR sensor mounted on UAV.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.18 no.1
• /
• pp.32-39
• /
• 2013

Although space-borne satellites are useful in obtaining information all around the world, they cannot observe at a suitable time and place. In order to overcome these limitations, an airborne remote sensing system was developed in this study. It is composed of a SAR sensor and a thermal infrared sensor. Additionally GPS, IMU, and thermometer/hygrometer were attached to the plane for radiometric and geometric calibration. The brightness of SAR image varies depending on surface roughness, and capillary waves on the sea surface, which are easily generated by sea winds, induce the surface roughness. Thus, sea surface wind can be estimated using the relationship between quantified SAR backscattering coefficient and the sea surface wind. On the other hand, thermal infrared sensor is sensitive to measure object's temperature. Sea surface temperature is obtained from the thermal infrared sensor after correcting the atmospheric effects which are located between sea surface and the sensor. Using these two remote sensing sensors mounted on airplane, four test flights were carried out along the west coast of Korea. The obtained SAR and thermal infrared images have shown that these images were useful enough to monitor coastal environment and estimate marine meteorology data.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.4
• /
• pp.223-233
• /
• 2021

Systematic and continuous monitoring and management of the energy consumption of buildings are important for estimating building energy efficiency, and ultimately aim to cope with climate change and establish effective policies for environment, and energy supply and demand policies. Globally, buildings consume 36% of total energy and account for 39% of carbon dioxide emissions. The purpose of this study is to generate three-dimensional thermo-spatial building models with photogrammetric technique using drone TIR (Thermal Infrared) images to measure the temperature emitted from a building, that is essential for the building energy rating system. The aerial triangulation was performed with both optical and TIR images taken from the sensor mounted on the drone, and the accuracy of the models was analyzed. In addition, the thermo-spatial models of temperature distribution of the buildings in three-dimension were visualized. Although shape of the objects 3D building modeling is relatively inaccurate as the spatial and radiometric resolution of the TIR images are lower than that of optical images, TIR imagery could be used effectively to measure the thermal energy of the buildings based on spatial information. This paper could be meaningful to present extension of photogrammetry to various application. The energy consumption could be quantitatively estimated using the temperature emitted from the individual buildings that eventually would be uses as essential information for building energy efficiency rating system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.279-279
• /
• 2021

위성영상정보는 센서의 종류, 취득, 분석, 재난과 위성영상 특성 매칭 등의 제약으로 재난 상황에서 제한적으로 사용되었다. 일반적으로 인공위성의 종류는 탑재한 센서의 정보제공 능력 범위에 따라 분류 가능하며 이에 따라 대상 범위가 결정된다. 본 연구에서는 재난의 예측, 탐지, 사후처리를 위한 위성자료의 취득과 활용을 위해 다양한 위성과 탑재된 센서의 궤도, 공간 해상도, 파장대 등의 특성에 대하여 분석하고 재난유형별로 최적 위성영상을 선정하였다. 행정안전부에서는 재난과 재해의 유형을 자연재난(10종)과 사회재난(27종)으로 분류하였다. 위성영상 활용이 가능한 재난 유형은 가시적으로 확인이 가능한 자연재난에 해당하며 그 중 태풍, 홍수, 가뭄, 산불 등 총 4종의 재난유형별로 가용한 최적의 위성영상을 분석하였다. 재난관측에 사용 가능한 대표적인 탑재체의 종류는 극궤도 지구관측 위성에서 광학과 SAR로 구분할 수 있다. 각 기본 특성에 따라 제공되는 정보의 종류가 분류되며 광학 센서는 태양복사 및 지구복사에너지 파장 영역 중 가시광선-근적외선-단파적외선-열적외선 파장대 영역의 분광 정보를 제공할 수 있는 다중 밴드들로 구성된다. 지표의 특정 대상이나 물질을 탐지하고 변화를 감지·분석하는데 유용하여 홍수, 태풍, 지진 등 자연 및 사회 재난·재해 관측에 유용하게 이용된다. SAR 센서는 장파장의 전자기파를 방출한 후 돌아오는 신호를 활용하여 대상에 대한 정보를 획득한다. 대기의 효과 및 요소를 투과하는 주파수 대역별 장파장 밴드 정보를 활용하여 고해상도의 대상 표면, 위치, 형태 등의 정보를 측량 및 관측하므로 중·광역 지역에 제약 없이 영상정보를 획득할 수 있어 산사태, 홍수, 지진, 등의 재난 모니터링에 유용하다. 이러한 다종 위성별 센서들의 특징(공간 해상도, 파장대별 밴드 특성, 관측폭, 재방문 주기 등)들을 분석하여 재난유형별로 가용한 무료/상용 지구관측위성을 분류한 결과 태풍에는 광역관측, 정지궤도 위성, 홍수에는 광학 및 SAR 고해상도 위성, 가뭄은 광역관측, 다분광 광학 위성 그리고 산불에는 정지궤도, 광학, SAR 위성이 적합함을 알 수 있다.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.22 no.3
• /
• pp.57-68
• /
• 2017

Continuous monitoring of spatial and temporal changes in key marine environmental parameters such as SST (sea surface temperature) near IORS (Ieodo Ocean Research Station) is demanded to investigate the ocean ecosystem, climate change, and sea-air interaction processes. In this study, we aimed to develop the system for continuously measuring SST using a TIR (thermal infrared) sensor mounted at the IORS. New SST algorithm is developed to provide SST of better quality that includes automatic atmospheric correction and emissivity calculation for different oceanic conditions. Then, the TIR-based SST products were validated against in-situ water temperature measurements during May 17-26, 2015 and July 15-18, 2015 at the IORS, yielding the accuracy of 0.72-0.85 R-square, and $0.37-0.90^{\circ}C$ RMSE. This TIR-based SST observing system can be installed easily at similar Ocean Research Stations such as Sinan Gageocho and Ongjin Socheongcho, which provide a vision to be utilized as calibration site for SST remotely sensed from satellites to be launched in future.