• Clean Technology
• /
• v.25 no.2
• /
• pp.161-167
• /
• 2019

Several types of reactors have been used during the past decade to perform fast pyrolysis of biomass. Among the developed fast pyrolysis reactors, fluidized bed reactors have been widely used in the fast pyrolysis process. In recent years, experimental studies have been conducted on the characteristics of biomass fast pyrolysis in a spouted bed reactor. The fluidization characteristics of a spouted bed reactor are influenced by particle properties, fluid jet velocity, and the structure of the core and annulus. The geometry of the spouted bed reactor is the main factor determining the structure of the core and annulus. Accordingly, to optimize the design of a spouted bed reactor, it is necessary to study the pyrolysis characteristics of biomass. However, no detailed investigations have been made of the fast pyrolysis characteristics of biomass in accordance with the geometry of the spouted bed reactor. In this study, fast pyrolysis experiments using Jatropha curcas L. seed shell cake were conducted in a conical spouted bed reactor to study the effects of reaction temperature and reactor cone angle on the product yield and pyrolysis oil quality. The highest energy yield of pyrolysis oil obtained was 63.9% with a reaction temperature of $450^{\circ}C$ and reactor cone angle of $44^{\circ}$. The results showed that the reaction temperature and reactor cone angle affected the quality of the pyrolysis oil.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.10
• /
• pp.710-716
• /
• 2013

New and renewable energy sources have drawn attention because of climate change. Many studies have been carried out in waste-to-energy field. Fast pyrolysis of waste lignocelluosic biomass is one of the waste-to-energy technologies. Bubbling fluidized bed (BFB) reactor is widely used for fast pyrolysis of the biomass. In BFB pyrolyzer, bubble behavior influences on the chemical reaction. Accordingly, in the present study, hydrodynamic characteristics and fast pyrolysis reaction of waste lignocellulosic biomass occurring in a BFB pyrolyzer are scrutinized. The computational fluid dynamics (CFD) simulation of the fast pyrolysis reactor is carried out by using Eulerian-Granular approach. And two-stage semi-global kinetics is applied for modeling the fast pyrolysis reaction of waste lignocellulosic biomass. To summarize, generation and ascendant motion of bubbles in the bed affect particle behavior. Thus biomass particles are well mixed with hot sand and consequent rapid heat transfer occurs from sand to biomass particles. As a result, primary reaction is observed throughout the bed. And reaction rate of tar formation is the highest. Consequently, tar accounts for 66wt.% of the product gas. However, secondary reaction occurs mostly in the freeboard. Therefore, it is considered that bubble behavior and particle motions hardly influences on the secondary reaction.

• Korean Chemical Engineering Research
• /
• v.48 no.1
• /
• pp.68-74
• /
• 2010

In this study, fluidized-bed pyrolysis has been conducted in order to recover the bitumen contained in the oil sand. Canada Alberta oil sand contains 11.9% of bitumen and the bitumen-derived heavy oil produced in fluidizedbed tends to be upgraded relative to the bitumen. The continuous operation has been performed using $N_2$ as a fluidization gas at 1 atm and $500^{\circ}C$ in a reactor of 170 cm height. The results showed 87.76% of bitumen conversion, where liquid products are 74.45% and gas products are 13.31%. $H_2$, $O_2$, CO, $CO_2$, $CH_4$, and NO and $C_1{\sim}C_4$ hydrocarbons in the gas products were analyzed by on-line gas analyzer and gas chromatography, respectively. The pyrolysis oil was analyzed by using proximate analysis, heavy metal analysis, SIMDIS, asphaltenes, and heating value. By SIMDIS analysis, naphtha was 11.50%, middle distillation was 44.83% and heavy oil was 43.66%. It was obvious that the pyrolysis oil was upgraded compared with bitumens.

• Proceedings of the KAIS Fall Conference
• /
• 2007.11a
• /
• pp.344-346
• /
• 2007

본 논문은 유동층반응기에서 메탄의 열분해에 의한 수소 생산과 탄소 생성에 대한 연구를 수행하였다. 환경에 대한 영향을 최소화한 상태에서 메탄의 전환반응을 메탄 분해촉매활성에 영향을 미치는 인자에 대하여 연구하였다. 측정된 압력요동특성치의 해석을 통하여 유동층 열분해촉매의 유동화현상을 측정하였으며, 유동화특성에 따른 메탄열분해능을 측정하였다. 메탄의 분해는 생성되는 수소를 이용하였다. 유동층의 이동성, $U-U_{mf}$, 마모, 비산유출 유동화가스의 효율밀도에 따른 영향을 연구하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2008.05a
• /
• pp.319-322
• /
• 2008

본 논문은 미분 반응기 및 유동층반응기에서 메탄의 열분해에 의한 수소 생산과 탄소 생성에 대한 연구를 수행하였다. 일반적으로 고온 분해시 사용되는 니켈과 철 성분을 대신할 철광석을 이용하여 분해특성을 고찰하였다. 환경에 대한 영향을 최소화한 상태에서 메탄의 전환반응을 메탄 분해촉매 활성에 영향을 미치는 인자에 대하여 연구하였다. 측정된 압력요동특성치의 해석을 통하여 유동층 열분해촉매의 유동화현상을 측정하였으며, 유동화특성에 따른 메탄열분해능을 측정하였다. 또한 고정층에서 공간속도, 입자크기, 비표면적이 미치는 영향을 고찰하여 철광석의 사용가능성을 타진하였다.

• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.478-482
• /
• 2016

In this study, a bubbling fluidized bed pyrolyzer (0.076 m I.D. and 0.8 m high) was employed to investigate the fast pyrolysis characteristics of larch sawdust which is abundant in Korea. The effects of operation conditions, such as bed temperature ($350-550^{\circ}C$), fluidization velocity ratio ($U_o/U_{mf} $: 2.0-6.0) and feeding rate (2.2-7.0 g/min) on product yields and their chemical components were studied. The number of chemical compounds in the bio-oil decreased with the increasing bed temperature because of secondary pyrolysis. The effects of the Uo/Umf ratio and feeding rate on bio-oil compositions were relatively lower than those of the bed temperature.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.10a
• /
• pp.75-82
• /
• 2005

Pyrolysis of biomass is one of the promising methods to obtain energy and valuable chemical stocks. Fast pyrolysis of Q. acutissima and L. letolepis has been carried out in a bubbling fluidized bed reactor to determine the optimum operating conditions of the pyrolyzer. Effects of reaction temperature, Uo/Umf, L/D ratio, and feed rate have been determined and the optimum conditions are as follows: $T\;=\;400^{\circ}C,\;U_o/U_{mf}\;=\;3.0,\;L/D\;=\;2.0$. Maximum yield of bio-oil was about 55% and the main compositions were carbohydrates, guaiacols, furans, phenols, and syringols. Product gas was consists of CO, $CO_2$, light hydrocarbons and the measured gas yield using the compositions agreed with the calculated value.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2003.05a
• /
• pp.567-572
• /
• 2003

하수슬러지로부터 재활용 가스 에너지를 얻을 수 있다. 슬러지 가스화의 공정 개발을 위해서는 초기에 휘발분이 방출되는 열분해 단계의 거동이 매우 중요하다. 열분해 생성물(가스, 타르, 촤 등)의 수율은 열분해 조건(가열속도, 체류시간, 온도, 압력, 가스분위기)뿐만 아니라 연료입자의 물리적 구조에 따라 좌우된다. 석탄의 경우에는 열분해과정에서 휘발분의 수율에 대한 상관식들이 많이 제시되었다.(중략)

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.487-492
• /
• 2008

In this paper, Thermocatalytic decomposition of methane in a fluidized bed reactor (FBR) was studied. The technical approach is based on a single-step decomposition of methane over carbon catalyst in air/water vapor free environment. The factors affecting methane decompostion catalyst activity in methane decomposition reactions were examined. The fluidization phenomena in a gas-fluidized bed of catalyst was determined by the analysis of pressure fluctuation properties, and the results were confirmed with characteristics of methane decomposition. The effect of parameters on the H2 yield was examined for methane decompostion. The decompstion rate was affected by the fluidization quality such as mobility, U-Umf, carbon attrition, elutriation and effectiveness density of fluidization gas.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.467-470
• /
• 2005

지구온난화 현상과 화석연료의 고갈에 대한 두려움 때문에 재생에너지에 대한 관심이 지속적으로 증가하고 있다. 이에 따라 대체에너지, 합성가스, 화학 원료, 오일 등으로 전환할 수 있는 바이오매스 활용에 대한 연구도 활발히 진행되고 있다. 바이오매스의 열화학적 전환 공정에는 열분해, 연소, 가스화 등이 이용되고 있다. 특히 열분해는 syringol, levoglucosan, guaiacol등의 고부가가치 물질들을 생산하기에 적합한 기술로 인정받고 있다. 본 연구에서는 국내에서 쉽게 구할 수 있는 톱밥, 폐목재 등의 바이오매스의 열화학적 전환 특성을 분석하였다. 사용된 바이오매스의 열분해 특성은 열중량 분석기 및 열천칭 반응기를 통해 분석하였으며 이를 통해 유동충 반응기(지름 0.2m, 높이 2m)를 설계 및 제작하였다. 반응온도 및 산소 농도가 증가할수록 levoglucosan 등의 고부가가치 물질들의 수율이 낮아지며 페놀류가 급격히 증가함을 알 수 있었다. 회재 성분이 높은 왕겨의 바이오오일 수율은 톱밥보다 $30\%$이상 낮게 나타났다