• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.513-516
• /
• 2011

본 연구에서 NaOH, Acetic acid, Silane 처리는 천연섬유와 matrix간의 계면 결합에 불리하게 작용하는 wax, lignin, hemicellose 등을 제거하기 위한 방법 중의 하나이다. 이러한 화학적 처리에 따른 왕겨분말의 형태학적 변화와 열적특성 변화를 관찰하였다. 전처리 조건으로 농도는 1.5%, 3%, 9%이며 각각 30min, 60min, 90min을 처리하였다. 처리하지 않은 왕겨 분말과 NaOH, Acetic acid, Silane 처리를 한 왕겨 분말의 성분을 Energy dispersive spectroscopy(EDS)로 분석하였으며, Scaning electron microscopy(SEM)으로 표면을 관찰하였다. 표면의 상태가 NaOH, Acetic acid, Silane 처리를 하였던 왕겨 분말이 처리를 하지 않았던 왕겨 분말보다 비교적 깨끗해지고, 크랙이 발생함을 확인하였다. 또한 전처리가 된 상태에서 수분흡수율을 측정하고, 처리를 하지 않은 왕겨 분말과 NaOH, Acetic acid, Silane 처리를 한 왕겨 분말을 Thermogravimetric Analysis(TGA)로 열분석을 실시하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.2
• /
• pp.98-109
• /
• 2021

Fundamental parameters describing overall operational characteristics of active cooling systems of a hypersonic flight vehicle are mainly classified into endothermic hydrocarbon fuels, regenerative cooling channels, and materials and system structures. Of primary importance is the improvement of endothermic performance of hydrocarbon aviation fuels in a series of studies developing efficient regenerative cooling systems. In a previous study, therefore, an extensive technical analysis has been carried out on thermal decomposition characteristics of liquid hydrocarbon fuels. As a subsequent study, catalytic cracking and steam reforming technologies have been reviewed to find a way for the improvement of endothermic reaction performance of hydrocarbon aviation fuels.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.4
• /
• pp.1-9
• /
• 2022

In the current study, in order to understand the dynamic response characteristics of the system according to the external acoustic forcing, a numerical approach was developed by adding an sign-sweep forcing function to the existing network model. Through this model, the sensitivity of frequency and pressure amplitude changes according to system parameters such as the physical dimensions and boundary conditions of the target combustor was analyzed in a wide frequency range. Analysis results of dynamic response characteristics of the target combustor are shown that the frequency regime with high dynamic pressure response was similar to the instability frequency range measured in the same combustor, and in particular, the response of the system depends greatly on the location of the acoustic forcing source term.

• Economic and Environmental Geology
• /
• v.56 no.3
• /
• pp.229-238
• /
• 2023

Bentonite is a type of rock that has been used as a traditional mineral medicine. It has a variety of pharmacological activities, and is used in traditional Korean medicine to treat jaundice, diarrhea, and hemostasis. In modern medicine, it is used as a raw material and additive for medicines such as antacids, gastrointestinal protective agents, and laxatives. Bentonite produced in Korea was produced through diagenesis or hydrothermal alteration of tertiary volcanic debris distributed in the Pohang and Gyeongju areas. It is mainly used for industrial purposes such as papermaking, paint, civil engineering, casting, and animal feed. Recently, technology is being developed to use it in cosmetics and pharmaceuticals. In this study, the geochemical characteristics of bentonite were identified by analyzing the main components and trace elements of 40 and 21 types of bentonite produced in the Gampo Gyeongju and Yeonil Pohang area. Also it were classifed by formation envrionment of bentonite deposits in the Gampo and Yeonil. As a result of the study, bentonite from the reserch area may be cased by argillic alteraton that alkali elements are removed form basaltic rocks by hydrothermal fluids and AI-CCPI alteration indices wrere also indentified argillic alteraton. It was found that there is a correlation between the behavior characteristics of heavy metal elements (P b, Cr, As) and the hydrothermal alteration of bentonite in the reserch area.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.3
• /
• pp.1-18
• /
• 2018

The purpose of this study is to analyze sensitivity of forest ecosystem to climate change using spatial analysis methods focused on 6 national parks. To analyze, we constructed MODIS NDVI and temperature of Korea Meteorologic Administration based on 1km spatial resolution and 16 days. And we conducted time-series and correlation analysis using MODIS NDVI and temperature. A most sensitive region to climate change is Jirisa National Park(r=0.434) and Seoraksan National Park(r=0.415), there is the highest mean correlation coefficient. The sensitivity of forest ecosystem varied according to habitat characteristics and forest types in national park. In Abies koreana of Hallsan Nation Park, temperature has raised, but NDVI has decreased. these results will be based data of climate change adaption policy for protecting forest ecosystem.

• Journal of the Korea Concrete Institute
• /
• v.19 no.3
• /
• pp.283-292
• /
• 2007

A research projects is currently being conducted to develop a nonlinear finite element analysis methods for predicting the structural behavior of reinforced concrete frame structures, exposed to fire. As part of this, reinforced concrete frames subjected to fire loads were analyzed using the nonlinear finite-element program DIANA. Two numerical steps are incorporated in this program. The first step carries out the nonlinear transient heat flow analysis associated with fire and the second step predicts the structural behavior of reinforced concrete frames subjected to the thermal histories predicted by first step. The complex features of structural behavior in fire conditions, such as thermal expansion, plasticity, cracking or crushing, and material properties changing with temperature are considered. A concrete material model based on nonlinear fracture mechanics to take cracking into account and plasticity models for concrete in compression and reinforcement steel were used. The material and analytical models developed in this paper are verified against the experimental data on simple reinforced concrete beams. The changes in thermal parameters are discussed from the point of view of changes of structure and chemical composition due to the high temperature exposure. Although, this study considers codes standard fire for reinforced concrete frame, any other time-temperature relationship can be easily incorporated.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.5
• /
• pp.450-461
• /
• 1984

A new indirect tool wear sensing technique is proposed using time series analysis. The acceleration measured on the tool post in the vertical direction during turning is sampled with uniform interval, and fitted following the ARMA modeling procedures. Various signal characteristics are observed in respect with the progress of flank wear. From those observations it is believed that; *The variance of the signal is approximately proportional to the increase of flank wear. *The absolute power of a dynamic mode decreases in the beginning of cutting until the maximum flank wear increases up to 0.4-0.5mm, and then increases. *The other characteristics are not so much related to the tool wear as the signal variance and the absolute power of a dynamic mode. Hence, the absolute power of a dynamic mode seems to be a good factor for the indication of tool-change time regardless of tool material or cutting conditions.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.2
• /
• pp.95-105
• /
• 2020

In order to promote efficient coastal management, it is important to continuously monitor the characteristics of the terrain, which are changed by various factors. In this study, time series UAV images were taken of Gyeokpo beach. And the standard deviation of ±11cm(X), ±10cm(Y), and ±15cm(Z) was obtained as a result of comparing with the VRS measurement performance for UAV position accuracy evaluation. Therefore, it was confirmed that the tolerance of the digital map work rule was satisfied. In addition, as a result of monitoring the erosion and sedimentation changes using the DSM(digital surface model) constructed through UAV images, an average of 0.01 m deposition occurred between June 2018 and December 2018, and in December 2018 and June 2019. It was analyzed that 0.03m of erosion occurred. Therefore, 0.02m of erosion occurred between June 2018 and June 2019. From the topographical change analysis results, the area of erosion and sediment height was analyzed, and the area of erosion and sedimentation was widely distributed in the ±0.5m section. If we continuously monitor the topographical changes in the coastal regions by using the 3D terrain modeling results using the time series UAV images presented in this study, we can support the coastal management tasks such as supplement or dredging of sand.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.112-113
• /
• 2021

하천으로 유입되는 오염물질은 유수의 흐름에 따라 이송되며 혼합된다. 이러한 오염물질의 해석을 위해서는 확산 또는 분산계수 산정이 필요하다. 오염물질의 거동과 관련된 실험적 연구는 방사선 동위원소와 형광성 물질을 이용하여 수행되어 왔으나, 추적자 실험은 많은 비용 및 인력을 요하며, 고정식으로 설치한 계측장비로부터 수집한 시계열 농도자료만을 이용하여 분석하기 때문에 공간적 분포에 대한 자료 취득은 어렵다는 한계가 있다. 하천의 오염물질을 모니터링하기 위해서는 공간을 이동하는 입자의 관점에서 물리량을 표현하는 Lagrangian 방식보다 특정 위치에서 물리량 변화를 표현하는 Eulerian 방식이 적합하다. 그러나 드론을 활용한 하천원격탐사 연구의 대부분은 이동식 플랫폼으로 활용되어 특정 시간에 공간적 분광특성의 분포 파악이 한정적이며, 동일 지점에서 분광특성의 시간적 변화를 파악할 수 없다. 따라서 본 연구에서는 기존의 면단위를 측정하는 이동식 플랫폼의 한계를 극복하고 하천 모니터링에 적합한 Eulerian 방식을 적용하기 위하여 CCTV 형태의 고정식 초분광촬영 플랫폼을 도입하였다. 본 연구에서는 하천으로 유입되는 오염물질의 거동을 분석하기 위하여 자연하천에서 형광성물질인 Rhodamine WT를 이용하여 추적자 실험을 수행하였으며, 접촉식 센서를 활용한 농도측정과 동시에 드론과 초분광센서를 활용하여 CCTV 형태의 고정식 초분광영상을 획득하였다. 실험결과 도출된 전통적인 방식의 분산계수 산정과 시공간 초분광영상을 활용한 분산계수 산정을 비교하여 오염물질 거동 분석에 초분광영상 활용의 가능성을 검토하였다. 본 연구에서 제시한 드론기반 시공간 초분광영상 기법을 교량이나 기타 하천구조물에 초분광 센서를 설치하여 CCTV형식으로 활용할 경우, 공단이나 하·폐수 처리장 등의 점오염원이 밀집해 있는 지역에 직접 설치하여 화학사고의 감지 및 오염물질의 유출 확인 및 조류, 부유사 등의 다양한 수질항목의 농도 변화 감지가 가능하고, 수심변화 감지로 장기적으로 활용할 경우 특정 지점에서의 하상변동 조사가 가능하다. 또한, 오염물질의 유출 사고 발생 등의 사람이 직접 접근이 불가능한 지역에 드론을 활용하여 초분광센서를 이용한 오염물질 감지가 가능할 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1135-1139
• /
• 2006

가뭄은 홍수와 함께 인류역사상 가장 큰 재해로 인식되어 있다. 미해양대기청의 발표에 따르면 20세기 최대 자연재해의 상위 5위 안에 4개의 가뭄이 포함되어 있다. 이러한 기록은 가뭄이 동서고금을 막론하고 국가의 흥망성쇠를 좌우할 만큼 막대한 피해를 입혀왔음을 의미한다. 그러나 가뭄의 해석은 가뭄의 정의 자체가 확실하지 않고 서서히 찾아오는 자연재해이기 때문에 그 시작과 끝을 인식하기 어렵다. 아울러 그 진행속도도 굉장히 느리며 또한 장기간에 걸쳐 지속되는 특성을 가지고 있고 시공간적으로 전파된다. 따라서 가뭄의 해석은 굉장히 까다로운 것이라 할 수 있으며 그 해석방법 또한 다양할 수 밖에 없다. 본 연구에서는 우리나라 전역 59개 지점의 표준강수지수(Standard Precipitation Index) 시계열 자료에 대한 공간적 패턴분석과 시간적인 자료확장을 시도하였다. 경험적 직교함수(Emperical Orthogonal function) 해석을 이용하여 자료의 공간적인 패턴을 확인하였고 EOF 해석에서 나타난 EOF Coefficient Time Series를 추계학적 모형에 적용하여 시간적인 자료 확장을 수행하였다. 이렇게 확장된 긴 기간의 자료를 이용하면 재현기간에 대한 평균적인 가뭄심도를 추출할 수 있으며 실제 나타난 사상의 재현기간이 어느 정도인지 평가할 수 있다. 또한 이렇게 나타난 가뭄심도를 강수부족량으로 환산하여 우리나라 대권역별 물부족량을 평가하였다.