• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.7
• /
• pp.729-738
• /
• 2010

The characteristics of lifted butane flames diluted with nitrogen have been investigated experimentally in order to elucidate the mechanism of individual flame oscillation modes. Flame oscillations in laminar free-jet lift-off flames are classified into the following five regimes: a stabilized lift-off regime (I), a heat-loss-induced oscillation (II), a buoyancy-induced oscillation along with a heat-loss-induced oscillation (III), a combined form of an oscillation prior to blow-out and a heat-loss-induced oscillation (IV), and a combination of an oscillation prior to blow-out and a buoyancy-induced oscillation along with a heat-loss-induced oscillation (V). The characterization of the individual flame oscillations modes are presented and discussed using Strouhal numbers and their relevant parameters by the analysis of the power spectrum for temporal variation of the lift-off height.

• Fire Science and Engineering
• /
• v.19 no.3 s.59
• /
• pp.70-75
• /
• 2005

The heat of combustion of polymer materials is an important fire characteristics, which can be used with other fire parameter to predict the potential fire hazard in the polymer handling process. The aim of this study is to predict the heat of combustion for polymers which used in the building interior materials. By using the literature data and multiple regression, the new equation for predicting the heat of combustion of polymers is proposed. The A.A.p.E.(average absolute percent error) and the A.A.D.(average absolute deviation) of the reported and the calculated heat of combustion by means of the oxygen consumption calorimeter and the stoichiometric coefficient were 4.46 and 1.09, and the correlation coefficient was 0.972. The values calculated by the proposed equations were in good agreement with the literature data. Therefore, it is expected that this proposed equations will support the use of the research for other polymer materials.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.16-19
• /
• 2011

본 논문은 건축물 내장재로 사용되는 폴리우레탄폼 및 스티로폼의 연소특성에 관하여 연구하였다. 연소특성 평가를 위하여 폴리우레탄폼 및 스티로폼을 대상으로 연소실험을 수행하였으며, 건축용 내장재 사용의 적합성 평가를 위하여 콘칼로리미터법을 이용한 열방출률 및 연기밀도를 측정 분석하였다. 연소특성 실험 결과, 일반 재질의 폴리우레탄폼은 착화와 동시에 급속히 연소되는 특성을 나타내었으며, 난연 처리된 폴리우레탄폼은 착화와 동시에 자체적으로 소화되는 특성을 나타내었다. 스티로폼은 착화 이후 서서히 연소 확대되며, 이후에는 가장 격렬히 연소되는 특성을 나타내었다. 방출률 및 연기밀도는 한국산업규격 KS F ISO 5660-1 및 국제해사기구의 FTP Code를 만족하지 못하는 것으로 평가되었으며, 이러한 결과로 볼 때, 폴리우레탄폼 및 스티로폼은 건축용 내장재로 사용하기 부적합한 것으로 판단된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.167-167
• /
• 2012

Aluminium-zinc-tin oxide (AZTO) 박막 트랜지스터는 Spin-coating 방법으로 제작되었다. AZTO용액의 용매는 2-Methoxyethanol, 용질은 각각 Aluminium nitride, Zinc acetate dihydrate, Tin chloride가 사용되어 제작되었다. 용액의 안정성을 위해서 미량의 Mono ethyl amine이 첨가되었다. 용액의 Zn:Sn의 몰 비율은 1 : 1로 고정 되었으며 Al의 mole비를 다양하게 늘리면서 실험을 진행하였다. 이렇게 만들어진 AZTO용액은 3,000 rpm으로 30초간 Spin-coating하였으며 이후 Furnace system을 통하여 $500^{\circ}C$의 온도로 1시간 동안 후열처리 공정을 진행하였다. AZTO박막을 활성층으로 제작된 박막 트랜지스터는 Al의 비율이 늘어남에 따라 처음엔 이동도가 증가하였으나 이후 이동도가 낮아지며 소자특성이 나빠지는 것을 보였다. 이러한 현상의 원인을 알아보고자 물리적, 전기적, 광학적 분석을 통해서 Al양의 변화가 박막트랜지스터 구동에 미치는 영향을 해석하였다. 먼저 AZTO용액은 열중량측정/시차열분석법(Thermo Gravimetry/Differential Thermal Analysis)을 이용하여 spin-coating 이후 후 열처리 온도 결정 및 박막의 변화를 관찰하였으며, X-선 분광(X-ray photoelectron spectroscopy)을 이용하여 박막의 조성 및 전자구조의 변화를, 타원분광해석법(Spectroscopic Ellipsometry)분석을 통하여 밴드 갭과 전도대 이하 밴드 갭 내에 존재하는 결함상태변화를 관찰하였다. AZTO 박막 내의 Al양을 조절하는 것은 박막내의 에너지 준위의 변화를 야기하고 그로인해 박막트랜지스터의 특성을 변화킨다는 결과를 도출하였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.4
• /
• pp.293-301
• /
• 2001

This paper reviews three methods to compute a pointwise confidence interval of neuro-fuzzy models and compares their estimation perfonnanee through simulations. The eOITl.putation methods under consideration include stacked generalization using cross-validation, predictive error bar in regressive models, and local reliability measure for the networks employing a local representation scheme. These methods implemented on the neuro-fuzzy models are applied to the problems of simple function approximation and chaotic time series prediction. The results of reliability estimation are compared both quantitatively and qualitatively.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.1
• /
• pp.44-49
• /
• 2012

The indirect-contact ECG measurement is a newly developed method for unconstrained and nonconscious measurement in daily Life. This study is the first step to reducing the large background noise appearing in indirect-contact ECG. This study built the thermal noise model of capacitively coupled active electrode which is used in indirect-contact ECG. The results show that the level of thermal noise estimated by the thermal noise model is much the same as that of actual background noise for the capacitively coupled active electrode alone. By applying the actual electrical properties of a sample cotton cloth to the thermal noise model, the theoretical level of thermal noise in the indirect-contact ECG was estimated. The results also show that the level of op-amp's intrinsic noise is so small that it can be negligible in comparison with thermal noise of resistors. The relationship between the level of thermal noise and the resistance of the bias resistor was derived, and it is the base for the further study how to choice the optimal resistance for the bias resistor.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.110-110
• /
• 2003

LED의 품위가 높아지고 고 광방출을 위한 전기적 출력이 높아질수록 LED 자체에서 발생하는 열이 아주 중요한 요소로 제출되고 있다. 본 실험에서는 여러 가지 LED 모델의 열적특성을 분석하여 가장 최적화된 모델을 생성하려고 한다 실험방법은 유한요소법을 사용하는 소프트웨어 ANSYS를 이용하여 여러 가지 LED 모델을 생성하고 입력조건과 경계조건을 집어넣고 해석한 후 결과를 분석하여 각종 모델의 최고 온도를 알 수 있다 그 다음 여러 가지 모델의 최고 온도를 비교하여 가장 최적화된 LED모델을 발견하고 또한 열적으로 영향 주는 요소들을 도출 해낼 수 있다. 이러한 분석은 금후 고휘도 LED램프생산성에 중요한 기반기술로 사료된다.

• Spatial Information Research
• /
• v.10 no.2
• /
• pp.185-199
• /
• 2002

The objective of this study is to investigate the suitable spatio-temporal analysis method considering the zoning effect of spatial analysis termed the modifiable areal unit problem(MAUP). In former studies of spatio-temporal analysis, there were disagreement between attribute data with spatial data, because of variation of administrative district aggregating attribute data. It is need to consider how the analysis zone effects spatial characteristics and spatio-temporal variation of urban region through land price variation analysis. This study considers MAUP through basic mesh system, which is composed of micro grid. Mesh system can solve disagreement of resolution between spatial data and attribute data.

• Polymer(Korea)
• /
• v.24 no.2
• /
• pp.201-210
• /
• 2000

To determine the effect of chain length of linear amine curing agents on the thermal and mechanical properties, standard epoxy resin, diglycidyl ether of bisphenol A (DGEBA) was cured with diethylenetriamine (DETA), triethylenetetraamine (TETA) and tetraethylenepentaamine (TEPA) in a stoichiometrically equivalent ratio. From this work, the effect of linear amine curing agents on the thermal and mechanical properties was significantly influenced by chain length of curing agents. In contrast, the results showed that the DGEBA/DETA system had higher values than the DGEBA/TETA and DGEBA/TEPA system in the density, shrinkage (%), thermal expansion coefficient, tensile modulus, and flexural strength. Whereas the DGEBA/DETA cure system had lower values than the DGEBA/TETA and DGEBA/TEPA cure system in the maximum exothermic temperature, conversion (%), and T$_{g}$. These findings imply that the differences in the maximum conversion about the chain length of curing agents affect the thermal and mechanical properties.s.

• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.712-720
• /
• 2012

Thermal degradation for glass fiber-reinforced polyamide 66 composite (PA 66) with respect of thermal exposure time has been investigated using optical microscopy, scanning electron microscopy and Fourier transform infrared spectroscopy. As the thermal exposure time was prolonged, a slight increase in tensile strength for only initial stage and afterward, a proportional decrease of tensile strength was observed. These results can be explained by the increase of crystallinity, followed by the increase of crosslinking density, chain scission and the decrease in chain mobility, due to thermal oxidation with the exposure time. Fourier transform infrared spectroscopy results showed the increase of ketone peak and silica peak on the surface of thermally exposed PA 66. In addition, the thermal decomposition kinetics of PA 66 was analyzed using thermogravimetric analysis at three different heating rates. The relationship between activation energy and lifetime-prediction of PA 66 was investigated by several methodologies, such as statistical tool, UL 746B, Ozawa and Kissinger. The activation energy determined by thermogravimetric analysis had a relatively large value compared with that from the accelerated test. This may result in over-estimating the lifetime of PA 66. In this study, a master curve of exponential fitting has been developed to extrapolate the activation energy at various service temperatures.