• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.1
• /
• pp.51-58
• /
• 2002

A simulation model has been developed to predict the performance of 5-valve gasoline engine by gas exchange process with combustion model. In this study, we simulated the intake flow characteristics and performance of 5-valve engine with entwine speed and we compared the 5-valve engine performance with that of 4-valve engine. As a result. the calculated value was in consistency with the measured value relatively. The performance of 5-valve engine was higher than that of 4-valve engine in high engine speed region.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.2
• /
• pp.26-33
• /
• 1997

In this study effect of residual stress and its redistribution in weldment on the fatigue crack propagation was investigated. Fatigue tests were conducted by the center notched specimens machined with welded plate. The residual stress and its redistribution after the crack growth were measured by the magnetizing stress indicator and hole-drilling method. Fatigue crack propagation was estimated by the specimens having residual stress redistributed after the cracks growth and having the effects of crack closure. Crack growth rates were predicted and compared with experimental results. It had been found that the predicted crack propagation rates have a good agreement with experimental results when the redistribution of residual stress was considered.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.627_628
• /
• 2009

도어락 스위치(Door-lock switch)는 드럼세탁기, 식기 세척기등 회전이나 열이 발생되어 작동 할 때 임의로 열지 못하도록 하는 가전제품에 쓰이는 도어안전잠금장치로 드럼세탁기에서는 없어서는 안 되는 중요한 부품 중의 하나이다. 드럼 세탁기 도어는 소비자가 사용 할 때 항상 느낌을 가지는 부분으로 안전성과 동시에 감성이 뒤따르는 부품이기도 하다. 본 논문은 드럼세탁기의 도어에 감성과 관련된 요소들을 조사하였으며, 도어락 스위치의 기구적인 구조들을 파악한 뒤 드럼세탁기에 장착하였을 때 열림력, 닫힘력을 측정할 수 있는 지그와 소프트웨어를 제작하여 측정한 힘의 그래프를 분석하고 사용자에 의해 평가한 후, 드럼세탁기 도어락 스위치의 구조에 따른 감성에 차이점을 찾아보고 최적의 설계를 위한 요소를 제시하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.3
• /
• pp.167-176
• /
• 2003

This study is focused on the development of a new muffler. A control valve installed in the exhaust system is operated by torsion springs, and its open angle is controlled automatically corresponding to the engine operating conditions. A control valve and a control muffler sensing exhaust-gas pressure are made f3r developing a new muffler. The experiments were done using an exhaust system simulator having the same pulsation wave frequency and similar pulsation propagation characteristics of a real exhaust system. The purpose of this study is to develope a new muffler system which has improved noise reduction quality and less power loss than conventional mufflers and electronic-control mufflers. Finally the characteristic of noise compared with conventional muffler and muffler sensing exhuast-gas pressure.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.716-718
• /
• 2012

본 논문에서는 모바일 폰으로 획득한 영상의 텍스트영역 검출을 제안한다. 최근 모바일 폰을 이용한 영상기반 응용 분야의 연구가 활발히 진행되고 있으며, 특히 영상에서 텍스트를 인식하기 위한 전단계로 텍스트 영역 검출은 중요하다. 본 논문은 텍스트 영역 검출을 위해 먼저, 컬러 영상을 입력 받아 그레이 이미지로 변환하여 영상내에 내포된 잡음을 제거하고 열림/닫힘 연산의 특징을 이용해 각 연결요소를 검출하고 검출된 요소들을 레이블링 한다. 레이블링 된 영상은 텍스트가 갖는 특정 조건에 의해 텍스트 영역인지 텍스트 영역이 아닌지를 검출하고 검출된 텍스트 영역은 검증을 통해 최종 텍스트 영역을 검출한다. 제안한 방법은 기존의 택스트 영역 겁출보다 정확도가 향상할 수 있다.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.79-82
• /
• 2009

In this paper, we propose new image processing method to detect fire image. At captured image from camera, we using OpenCV library to implement various image processing techniques such like differential image, binarization image, contour extraction, remove noise(morphology open, close), pixel calculation, flickering extraction, etc.

• Journal of the Korean Chemical Society
• /
• v.38 no.10
• /
• pp.763-768
• /
• 1994

As a part of synthetic programs aimed at Dolastatin 10 analogues, synthetic pathway toward various peptides were investigated. 4-Amino-3-hydr> Transfer interrupted!nalogues were prepared by ring opening of epoxides with ammonia in MeOH. Several peptides were prepared starting from these unusual amino acids through using mainly DCC coupling.

• 전자공학회논문지 IE
• /
• v.45 no.2
• /
• pp.20-27
• /
• 2008

In this paper, we propose a new image processing technique that reliably detects the various defects of TFT-LCD polarizing films. The image of polarizing film is acquisited from reflected laser beam First, we apply the morphological image processing technique to remove the background noise. Next, we use the 2-dimensional LMS adaptive filtering and statistical characteristics to detect the white and black defects. Performance of the proposed method is evaluated on real TFT-LCD polarizing film samples.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.6
• /
• pp.1193-1202
• /
• 1989

본 논문에서는 발전소의 소재로 많이 쓰이고 있는 304 스테인리스강(앞으로는 304SS로 표기함)과 316스테인리스강(앞으로는 316SS로 표기함)의 크립 균열 발생 거동 을 각각 600.deg. C와 625.deg. C에서 조사한다. 이 온도는 발전소의 반응기(reactor)에 사용 되는 304SS와 316SS이 받는 온도이다. 즉 304SS와 316SS의 크립 균열 발생을 지배 하는 파괴 매개변수가 무엇인지가 크립 파괴 실험을 통하여 조사된다. 실험 결과는 이미 제안되어 있는 크립 균열 발생 모델에서 예측된 결과와 비교된다. 특히 304SS 와 316SS은 고온에서의 연성도가 변형률 속도에 따라 변하는 것으로 알려져 있다. 본 연구에서는 '변형률 속도에 따른 재료의 연성도의 변화에 근거한 균열 발생 모델' 을 제안하고, 그 모델에서 예측된 크립 발생 거동을 실험 결과와 비교한다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.40-45
• /
• 2001

The relationship between structural geometry and number of life cycles to failure is investigated to improve the fatigue life of structural components. The linear elastic fracture mechanics(LEFM) approach is integrated with shape optimal design methodology. The primary objective of this study is to decide an optimal shape for enhancing the life of the structure. The results from LEFM analyses are used in the fatigue model to predict the life of the structure before failure is occurred. The shape of the structure is optimized by using the growth strain method. Relevant issues such as problem formulation, finite element modeling are explained. Three design examples are solved, and the results show that, with proper shape changes, the life of structural systems subjected to fatigue loads can be enhanced significantly.