• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1123-1131
• /
• 2005

In this paper, optimal position of optical phase conjugator (OPC) for best compensating distorted WDM channels due to both chromatic dispersion and self phase modulation (SPM) in $8{\times}40$ Gbps WDM systems is numerically investigated, and the eye opening penalty (EOP) and bit error rate (BER) characteristics of overall WDM channels at this position is investigated, comparing with that in case of OPC placed at mid-way of total transmission length. It is confirmed that the compensation extents in WDM system with OPC is more improved by the shifting OPC position from the mid-way of total transmission length, depending on the modulation format and fiber dispersion coefficient. Ant it is confirmed that, from a viewpoint of the reception performance, EOP of each channel is more or less different with one another, but the BER characteristics of overall channels are almost equal.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.10
• /
• pp.801-807
• /
• 2020

Opening characteristics of a main oxidizer shut-off valve at different valve inlet pressures have been experimentally investigated. The pilot pressure at the moment of the valve opening increases linearly with increasing the valve inlet pressure and the increased pilot pressure reduces the valve travel time. As the pilot pressure increases at the moment of valve opening, the time to start opening the valve is delayed resulting in increasing the valve opening time. With the increment of the valve inlet pressure, the valve opening time is mainly determined by the time required for the pilot pressure to start opening the valve. Therefore the design of a pilot gas supply system can readily control the valve inlet pressure at the valve opening as well as the amount of oxidizer supplied to a combustion chamber during the engine startup.

• Journal of Korean Society of Forest Science
• /
• v.103 no.3
• /
• pp.321-338
• /
• 2014

In the Natural Monument (No. 432) Jeju Sanghyo-dong Cymbidium kanran Habitat (39 ha), flora, vegetation diversity, stand structure, mirco-climate, canopy openness, light environment and soil temperature and moisture were quantified from Oct. 2013 to Feb. 2014. Compare to Seogwipo-si, daily mean temperature ($5.7^{\circ}C$) and moisture (75.8%) in study area were lower at $3.3^{\circ}C$ and 15%, respectively. Mean soil temperature and moisture were $16.5^{\circ}C$ and 37.3%, respectively, and mean litter layer depth (n = 81) was 4.3 cm. Mean canopy openness and light availability at forest floor were 15.5% and $8.5mol{\cdot}m^{-2}{\cdot}day^{-1}$, respectively. Total of 22 species including vascular and bryophyte plants and 6 vegetation group were observed. Castanopsis siebildii was dominant species in study area, and density and basal area were 1,777 stem/ha and $90.3m^2/ha$.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.4
• /
• pp.35-42
• /
• 2009

본 연구는 급수전('tap'과 'faucet'은 호환사용)의 종류에 따른 사용자의 조작방향에 대해 우리나라와 다른 나라의 문화적인 차이를 비교한 연구결과이다. 이를 위하여 우리들이 가정과 공공시설의 화장실이나 욕실 등에서 많이 사용하고 있는 냉 온수 일체형 레버형 손잡이 급수전과 냉 온수 분리형 손잡이 급수전을 선정하여 이의 열림 방향에 대한 스테레오타입을 파악하였다. 또한 본 실험결과와 다른 문화권의 자료를 비교하여 이의 차이를 규명함으로써 서로 다른 사용자들이 공감하는 설계방향에 대해 언급하였다. 국외 자료는 연구문헌을 참조하였으며 국내자료는 직접 10대에서 60대 이상까지 6개 연령계층의 남 여 50명씩 총 600명을 할당표본추출 방식으로 선정하여 실험을 통하여 수집하였다. 조사 결과는 각 항목별로 통합 자료, 성별, 연령별, 주손에 따라 빈도분석을 실시하였으며 카이제곱검정을 통해 성별, 연령계층별, 주손(hand dominance)별로 스테레오타입의 기대특성(expectation characteristics)에 대해 문헌을 통해 조사된 연구결과와 상호비교 분석하였다. 분석결과 우리나라 사람은 비교 분석된 다른 나라 사람과 같이 스테레오타입에 대한 통상적인(그러나 동일하진 않음) 문화적인 배경을 공유하고 있음을 알 수 있다. 본 연구결과는 급수전 손잡이 설계에 있어서 서로 다른 문화적인 배경에 따른 보편적 기대와 일치된 설계지침으로서 사용상의 편리성과 안전성을 향상시키는데 유용하게 이용될 수 있을 것이다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.103-111
• /
• 1990

This paper presents a methodology for predicting stable crack growth and instability of a cracked body under monotonically increasing load. It is based on a model that incremental crack extensions and load increments after fracture initiation occur by turns in sequence and the criterion that the crack grows by an incremebt .delta.a when the opening displacement at the current crack tip increases by a critical value V$_{c}$. It is shown that the value I$_{c}$ = V$_{c}$/ .delta. a is a material constant characterizing ductile crack growth resistance. Along with the fracture initiation toughness value, the constant is used for the calculation of the loads against crack extensions by adding up each increment. The specimen failure is defined to occur when the necessary load increment for crack extension is zero or when the limit load in the current ligament is reached. The predicted failure loads are in good agreement with the avaliable experimental failure loads for the compact and center-cracked tension specimens of 7075-T651, 2024-T351 aluminum alloys and 304 stainless steel.steel.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.5
• /
• pp.740-745
• /
• 1987

For the prediction of the crack growth initiation from a blunt notch or a precrack in a prestrained material under plane strain tension and small-scale yielding conditions, a microscopic fracture criterion is proposed in terms of the crack tip opening displacement(COD) needed for the attainment of fracture strain at a microstructural distance. Smooth blunting of a crack tip with an initial root radius is assumed, and strain distributions on the crack-line axis are calculated at each deformation stage until the distributions against an original distance normalized to the COD are insensitive to an initial root radius. This case of no initial-root-radius effect is taken as for a sharp crack tip, on which the criterion is applied to determine the characteristic length of material from a critical COD for a fatigue-precracked specimen. The predicted COD at the fracture initiation from a crack with an initial root radius or a prestraining shows reasonable agreement with experimental values.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.11
• /
• pp.2771-2776
• /
• 2000

In this work, the effect of surface treatment of prepreg on the mode I fracture behavior was studied. Unidirectional (0-deg) double cantilever beam (DCB) specimens were used for fracture tests. Two groups of DCB specimens were made: the first group was made of prepregs surface-treated by Ar(sup)+ ion beam under oxygen environment and the second group was made of regular prepregs. For both groups, fracture resistance curve (R-curve) was determined and compared to each other, Results showed that resistance behavior of the first group is better than that of the second group. That is, mode I fracture toughness, G(sub)Ic of the first group is 24% larger than that of the second group. SEM examination shows that the improvement of G(sub)Ic is due to the increase of interfacial strength between plies.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.12
• /
• pp.1588-1595
• /
• 2000

Natural convection heat transfer in an enclosure with an opening in the right veritcal wall and a heat source at the bottom surface is investigated using a holographic interferometric technique. The effects of the opening length, divider length attached to the top wall, and heater temperature on the temperature distribution are examined. The opening length as well as the divider length greatly affects the degree of inflow and outflow of air. In the case of small opening length, the opening doesnt affect much the upward warm air flow resulting in the symmetric temperature distribution .The upward flow in hindered by the divider resulting in the decrease of heat transfer from the heater region to the upper region. The longest divider shows the highest temperature in the lower region of enclosure. In the case of large opening length, the inward cold flow moves the upward flow to the left direction. Among the cases of different divider length, the case of H(sub)d=0.25H shows the highest temperature in the lower region of enclosure.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.1
• /
• pp.77-86
• /
• 1989

A modified $C^{*}$ integral as load parameter in creep fracture is proposed considering the effect of crack growth. It is shown that the parameter does not depend on crack velocity. By performing experiment using STS 304 stainless steel at 600.deg.C the validity of the parameter is investigated. The results show that the parameter is a good measure as a load parameter in creep fracture and the rate of crack tip opening displacement can also be a creep load parameter for STS 304 at 600.deg. C.C.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.2
• /
• pp.188-197
• /
• 1986

With respect to structural carbon steel(SM 22C), it was studied how the overstress or the understress has effects on fatigue inside crack propagation curve of a two level stress. Obtained results are summarized as follows. (1) The overstress or the understress, at a slip band occurrence stage, does not change the inside crack propagation curve because the crack closure and opening phenomena do not happen. (2) The overstress, at a crack propagation stage, does not change the inside crack propagation curve because the crack closure of overstress in compressive state is nearly same that of base stress in compressive state. (3) The understress, at a crack propagation stage, give rise to an acceleration of crack growth because the crack closure of understree in compressive state is more open than that of base stress in compressive state and the phenomenon is the essential increase of the actual applied stress of the specimen.