• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.3
• /
• pp.31-39
• /
• 2021

In this study, the fiber blending ratio and strain rate effect on the tensile properties synergy effect of hybrid fiber reinforced cement composite was evaluated. Hooked steel fiber(HSF) and smooth steel fiber(SSF) were used for reinforcing fiber. The fiber blending ratio of HSF+SSF were 1.5+0.5, 1.0+1.0 and 0.5+1.5vol.%. As a results, in the cement composite(HSF2.0) reinforced with HSF, as the strain rate increases, the tensile stress sharply decreased after the peak stress because of the decrease in the number of straightened pull-out fibers by increase of micro cracks in the matrix around HSF. When 0.5 vol.% of SSF was mixed, the micro cracks was effectively controlled at the static rate, but it was not effective in controlling micro cracks and improving the pull-out resistance of HSF at the high rate. On the other hand, the specimen(HSF1.0SSF1.0) in which 1.0vol.% HSF and 1.0vol.% SSF were mixed, each fibers controls against micro and macro cracks, and SSF improves the pull-out resistance of HSF effectively. Thus, the fiber blending effect of the strain capacity and energy absorption capacity was significantly increased at the high rate, and it showed the highest dynamic increase factor of the tensile strength, strain capacity and peak toughness. On the other hand, the incorporation of 1.5 vol.% SSF increases the number of fibers in the matrix and improves the pull-out resistance of HSF, resulting in the highest fiber blending effect of tensile strength and softening toughness. But as a low volume fraction of HSF which controlling macro crack, it was not effective for synergy of strain capacity and peak toughness.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.1
• /
• pp.280-301
• /
• 2021

Chogak has been regarded as originating from the paintings decorating building elements. Various curved shape drawings that were first seen in the paintings of Goguryeo tomb murals evolved into the vine patterned Dancheong of Geuklakjeon in Bongjeongsa. Cheomcha of Geuklakjeon was chiseled with Yeonhwadusik relievo at the bottom on top of Dancheong, and this was the beginning of Cheomcha-Chogak. Also, Cheomcha, which was carved with a preliminary vine patterned Chogak in Daeungjeon in Bongjeongsa, opened the era of engraving Chogak directly on the surface of structural elements. Since then, vine patterned Chogak was a significant decoration technique for the Cheomcha of traditional wooden construction for a long time. Because Jeongjagak is a structure that was continuously built between the end of the Japanese invasion of Korea in 1592 and the late Joseon Dynasty, the transition of Cheomcha-Chogak over time can be seen through Jeongjagak architecture. The early Cheomcha-Chogak presents stems that climb up (Upbound-type) towards the headpiece on a column, while stems of Chogak later reversed direction to descend (Downbound-type) from the headpiece. This study examined the transition process and reasons for the change, with a focus on the findings above, and identified a new type of Chogak that is unrelated to the direction type and was adopted during the transition from Upbound-type to Downbound-type. The new type appeared when the Jeongjagaks for the Royal Tomb of Kyeongjo and those of the Injo were built, and it matches with the transitional period wherein lotus vanishes from Hwaban-Chogak. The study also inferred that the direction change of Cheomcha-Chogak stems was caused by the separation of vine patterned Chogak, carved with a two-stepped inner Ikgon, into both upward and downward from the headpiece, and this led to the changes that manifested as the inside of Choikgong being the Downbound-type Chogak and the variegated vine patterned Chogak of Choikgong affecting the direction of Cheomcha-Chogak. This is the follow-up study of "A Study on the Hwaban-Chogak of the Neungwon-Jeongjagak," a paper published in 2018, and is limited in n that Cheomcha, the focus of the research, is just one of the construction elements of Jeongjagak. The entirety ofChogak cannot be understood only by observing Cheomcha.

• Composites Research
• /
• v.34 no.3
• /
• pp.192-198
• /
• 2021

Due to enormous market growing of electric vehicles without combustion engine, reducing unwanted BSR (buzz, squeak, and rattle) noise is highly demanded for vehicle quality and performance. Particularly, innerbelt weatherstrips which not only block wind noise, rain, and dust from outside, but also reduce noise and vibration of door glass and vehicle are required to exhibit high damping properties for improved BSR performance of the vehicle. Thermoplastic elastomers (TPEs), which can be recycled and have lighter weight than thermoset elastomers, are receiving much attention for weatherstrip material, but TPEs exhibit low material damping and compression set causing frictional noise and vibration between the door glass and the weatherstrip. In this study, high damping EPDM (ethylene-propylene-diene monomer)/PP (polypropylene) thermoplastic vulcanizates (TPV) were investigated by varying EPDM/PP ratio and ENB (ethylidene norbornene) fraction in EPDM. Viscoelastic properties of TPV materials were characterized by assuming that the material damping is directly related to the viscoelasticity. The optimum material damping factor (tanδ peak 0.611) was achieved with low PP ratio (14 wt%) and high ENB fraction (8.9 wt%), which was increased by 140% compared to the reference (tanδ 0.254). The improved damping is believed due to high fraction of flexible EPDM chains and higher interfacial slippage area of EPDM particles generated by increasing ENB fraction in EPDM. The stick-slip test was conducted to characterize frictional noise and vibration of the TPV weatherstrip. With improved TPV material damping, the acceleration peak of frictional vibration decreased by about 57.9%. This finding can not only improve BSR performance of electric vehicles by designing material damping of weatherstrips but also contribute to various structural applications such as urban air mobility or aircrafts, which require lightweight and high damping properties.

• Journal of the Daesoon Academy of Sciences
• /
• v.47
• /
• pp.203-239
• /
• 2023

Jo Jeongsan's religious activity undertaken to benefit society can be organized into two categories. First, attention can be paid to Jo Jeongsan's religious activity of establishing religious order by enshrining Kang Jeungsan as the God of Ninth Heaven and making the Great Dao of Heaven and Earth the basic idea inspiring the social activity of his order. This was completed through the 50 years of propagation work carried out by Jo Joengsan in accordance with Kang Jeungsa's purpose of saving the world and its inhabitants. Second, his practice of social work in the field of people's lives based on the idea of the Dao can also be observed. This religious activity of Jo Jeongsan which began in 1909 was the sacred manifestation of his will to realize Kang Jeungsan's purpose of saving the world and people, and it was also a practice of spreading virtue throughout the world. In addition, Park Wudang carried out Sihak and Sibeop Gongbu (two varieties of holy work) for the cultivation of Dao trainees, and those methods came from the systematic cultivation practice established by Jo Jeongsan. Regarding this, we can refer to Kang Jeungsan's saying, "As the Dao shall dwell in the 12,000 peaks of Geumgang Mountain, the same number of sages who were enlightened to the Dao will be born into the world." The perfected state of human maturity or the emergence of people who are enlightened to the Dao would be the completion of the idea of saving the world and its inhabitants. Therefore, the holy works of Sihak and Sibeop that are now being carried out can be seen as the continuance of the pursuit of saving the world and humankind, as it was continually upheld by Park Wudang's predecessors, Jo Jeongsan and Kang Jeungsan.

• Journal of Bio-Environment Control
• /
• v.32 no.4
• /
• pp.267-277
• /
• 2023

This study is in order to the effect of 1-methlycyclopropene (1-MCP) treatment and film package as modified atmosphere packaging (MAP) on the changes in fruit quality factors of 'Daehong' peaches during cold storage. The concentrations of 1-MCP were treated at 1µL·L^-1 and 2µL·L^-1, and peaches in film package were stored for 28 days in cold storage at 5±1℃ and 85±5% RH. The fruits stored carton box were used as a control of MAP, and 1-MCP free fruits were used as the control of both packages. Rate of fresh weight loss during storage was not significantly different between groups with and without 1-MCP treatment, but was higher in the box package than in the MAP. The control group had a higher incidence of both gases with the 1-MCP treatment group showing statistically significantly low. Carbon dioxide in the package was lowered by about 12% compared to the non-treated group, and the ethylene concentration was maintained at 1µL·L^-1, showing a significance low compared to other treated groups. As the storage period elapsed, the firmness of 1-MCP and MAP treated fruits remained significant at 5-9% compared to the control group. Regardless of the packaging method Hunter a^* values of exocarp and mesocarp were significantly higher in fruit treated with 1-MCP 1µL·L^-1 treatment than in the control group, and anthocyanin was significantly higher in the fruit during the storage period, especially high in MAP. In summary, fruits of MAP group with 1-MCP 1µL·L^-1 had rate of lower respiration and ethylene production, and little changes in firmness, Hunter a^* values of exo-carp and meso-carp, and anthocyanin, which is considered the most suitable method for preserving postharvest quality of the peach cultivar during the storage.

• Journal of Bio-Environment Control
• /
• v.33 no.3
• /
• pp.163-171
• /
• 2024

This study was aimed to investigate the effects of layer-by-floor environmental conditions and lower shelf supplemental lighting on the productivity of fresh shoots when growing rosemary in multi-layer cultivation. The 10-cm cuttings from stock plants of common rosemary (Rosemarinus officinalis) were planted in a 128-hole tray, rooted, and then transplanted into pots of 750, 1,300, and 2,000 mL. Afterwards, they were placed on multi-layer shelves (width × length × height: 149 × 60 × 57 cm, 3-layer) in a two-linked greenhouse and cultivated using the sub-irrigation. The productivity of young shoots by layer of the multi-layer shelf was the highest on the third floor (top floor), but productivity decreased sharply after September due to stem lignification caused by excessive light during the summer. Conversely, the lower two layers exhibited faster growth rate of young shoots until the late cultivation period, but the quality decreased due to stem softening and leaf epinasty. To address the excessive light problem on the third floor during the summer, shading was implemented at 30% opacity in July and August, resulting in a 210% increase in rosemary young shoots count and a 162% increase in fresh weight per unit area compared to the unshaded control. To improve the lighting deficiency on the lower layer, supplemental lighting with LED at 30 W increased rosemary young shoot harvest by 168% from June to September compared to no supplemental lighting, but it decreased productivity after September. Therefore, when growing rosemary in multi-layer, it is judged that intensive production of young shoots is possible if the third floor (top layer) is shaded with 30% of light from July to August to prevent stem lignification, and the lower layer is temporarily supplemented with LED 30 W from June to September to increase young shoot growth.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.3
• /
• pp.214-223
• /
• 2013

BACKGROUND: This study focused on the development of an analytical method about dichlorprop (DCPP; 2-(2,4-dichlorophenoxy)propionic acid) which is a plant growth regulator, a synthetic auxin for agricultural commodities. DCPP prevents falling of fruits during their growth periods. However, the overdose of DCPP caused the unwanted maturing time and reduce the safe storage period. If we take fruits with exceeding maximum residue limits, it could be harmful. Therefore, this study presented the analytical method of DCPP in agricultural commodities for the nation-wide pesticide residues monitoring program of the Ministry of Food and Drug Safety. METHODS AND RESULTS: We adopted the analytical method for DCPP in agricultural commodities by gas chromatograph in cooperated with Electron Capture Detector(ECD). Sample extraction and purification by ion-associated partition method were applied, then quantitation was done by GC/ECD with DB-17, a moderate polarity column under the temperature-rising condition with nitrogen as a carrier gas and split-less mode. Standard calibration curve presented linearity with the correlation coefficient ($r^2$) > 0.9998, analysed from 0.1 to 2.0 mg/L concentration. Limit of quantitation in agricultural commodities represents 0.05 mg/kg, and average recoveries ranged from 78.8 to 102.2%. The repeatability of measurements expressed as coefficient of variation (CV %) was less than 9.5% in 0.05, 0.10, and 0.50 mg/kg. CONCLUSION(S): Our newly improved analytical method for DCPP residues in agricultural commodities was applicable to the nation-wide pesticide residues monitoring program with the acceptable level of sensitivity, repeatability and reproducibility.

• Clinical and Experimental Pediatrics
• /
• v.48 no.7
• /
• pp.737-744
• /
• 2005

Purpose : Infants and children with cardiovascular diseases often present with respiratory symptoms. However, missed or delayed evaluation for potential airway problem may complicate overall prognosis. The aim of this study is to determine the clinical characteristics of these patients and explore the cause of airway problem. Methods : We reviewed the medical records of 64 patients(M : F=33:31, mean age : $6.3{\pm}7.5$ months) whose airway problems were proven by computed tomography or bronchoscopy in perioperative periods at the Asan Medical Center from January 1997 to June 2004. Patients were divided into two groups based on the duration of ventilator care : ${\leq}7$ days(group 1 : 23 cases, M : F=10 : 13) and >7 days(group 2 : 41 cases, M : F=23 : 18). Results : The patients in group 2 significantly developed more post-operative respiratory symptoms than group 1(P<0.001) and had more airway problems including extrinsic obstruction, intrinsic anomaly, and combined problem than group 1 although not significantly different(P=0.082). Among underlying diseases, the most common diseases were vascular anomaly(26.2 percent) and aortic arch anomaly(26.2 percent) in group 1 and pulmonary atresia with ventricular septal defect(22.4 percent) in group 2. The most frequent respiratory symptoms were recurrent wheezing pre-operatively and failure of ventilator weaning post-operatively. The major types of airway anomaly were tracheomalacia and tracheal stenosis(in each case 18.2 percent). Nineteen patients with persistent airway problems underwent aortopexy or other vascular correction. Of the 19 patients, 13(68.4 percent) were improved, but 2 failed in weaning ventilator and 4 died of non-airway problems. Conclusion : Early evaluation and treatment for potential airway problems may affect natural or surgical prognosis in patients with cardiovascular diseases presenting with respiratory symptoms.

• Korean Journal of Heritage: History & Science
• /
• v.39
• /
• pp.351-378
• /
• 2006

With the development of media, the methods for the documentation of intangible cultural heritage have been also developed and diversified. As well as the previous analogue ways of documentation, the have been recently applying new multi-media technologies focusing on digital pictures, sound sources, movies, etc. Among the new technologies, the documentation of intangible cultural heritage using the method of 'Motion Capture' has proved itself prominent especially in the fields that require three-dimensional documentation such as dances and performances. Motion Capture refers to the documentation technology which records the signals of the time varing positions derived from the sensors equipped on the surface of an object. It converts the signals from the sensors into digital data which can be plotted as points on the virtual coordinates of the computer and records the movement of the points during a certain period of time, as the object moves. It produces scientific data for the preservation of intangible cultural heritage, by displaying digital data which represents the virtual motion of a holder of an intangible cultural heritage. National Research Institute of Cultural Properties (NRICP) has been working on for the development of new documentation method for the Important Intangible Cultural Heritage designated by Korean government. This is to be done using 'motion capture' equipments which are also widely used for the computer graphics in movie or game industries. This project is designed to apply the motion capture technology for 3 years- from 2005 to 2007 - for 11 performances from 7 traditional dances of which body gestures have considerable values among the Important Intangible Cultural Heritage performances. This is to be supported by lottery funds. In 2005, the first year of the project, accumulated were data of single dances, such as Seungmu (monk's dance), Salpuri(a solo dance for spiritual cleansing dance), Taepyeongmu (dance of peace), which are relatively easy in terms of performing skills. In 2006, group dances, such as Jinju Geommu (Jinju sword dance), Seungjeonmu (dance for victory), Cheoyongmu (dance of Lord Cheoyong), etc., will be documented. In the last year of the project, 2007, education programme for comparative studies, analysis and transmission of intangible cultural heritage and three-dimensional contents for public service will be devised, based on the accumulated data, as well as the documentation of Hakyeonhwadae Habseolmu (crane dance combined with the lotus blossom dance). By describing the processes and results of motion capture documentation of Salpuri dance (Lee Mae-bang), Taepyeongmu (Kang seon-young) and Seungmu (Lee Mae-bang, Lee Ae-ju and Jung Jae-man) conducted in 2005, this report introduces a new approach for the documentation of intangible cultural heritage. During the first year of the project, two questions have been raised. First, how can we capture motions of a holder (dancer) without cutoffs during quite a long performance? After many times of tests, the motion capture system proved itself stable with continuous results. Second, how can we reproduce the accurate motion without the re-targeting process? The project re-created the most accurate motion of the dancer's gestures, applying the new technology to drew out the shape of the dancers's body digital data before the motion capture process for the first time in Korea. The accurate three-dimensional body models for four holders obtained by the body scanning enhanced the accuracy of the motion capture of the dance.

• Journal of Korean Society of Forest Science
• /
• v.14 no.1
• /
• pp.1-20
• /
• 1972

The trend and achievements of forest genetics research in abroad were investigated through observation tours and reference work and following facts were found to be important aspects which should be adopted in the forest genetics research program in Korea. Because of world wide recognization on the urgency of taking a measure to reserve some areas of the representative forest type on the globe before the extingtion of such forest type as the results of continuous exploitations of the natural forests to meet the timber demand all over the world, it is urgently needed to take a measure to reserve certain areas of natural stand of Pinus koraiensis, Pinus parviflora, Pinus densiflora f. erectra, Abies koreana, Quercus sp., Populus sp., etc. as gene pool to be used for the future program of forest tree improvement. And the genetic studies of those natural forest of economic tree species are also to be performed. 1. Increase of the number of selected tree for breeding purpose. Because of the fact that the number of plus tree at present is too small to carry out selection program for tree improvement, particularly for the formation of source population for recurrent selection of parent trees of the 2nd generation seed orchard it is to be strongly emphasized to increase the number of plus tree by alleviating selection criteria in order to enlarge the population size of plus trees to make the selection program more efficient. 2. Progeny testing More stress should be placed on carrying out progeny testing of selected trees with open pollinated seeds. And particular efforts are to be made for conducting studies on adult/juvenile correlation of important traits with a view to enable to predict adult performances with some traits revealed in juvenile age thus to save time for progeny testing. 3. Genotype-environment interaction Studies on genotype and environment interaction should be conducted in order to elucidate whether the plus trees selected on the good site express their superiority on the poor site or not and how the environment affect the genotype. And the justification of present classification of seed distribution area should be examined. 4. Seed orchard of broad leaf tree species. Due to the difficulty of accurate comparison of growth rate of neighbouring trees of broad leaf tree species in natural stand, it is recommended that for the improvement of broad leaf trees a seedling seed orchard is to be made by roguing the progeny test plantation planted densely with control pollinated seedlings of selected trees. 5. Breeding for insect resistant varieties. In the light of the fact that the resistant characteristics against insect such as pine gall midge (Thiecodiplosis japonensis U. et I.) and pine bark beetle (Myelophilus pinipera L.) are highly correlated with the amount and quality of resin which are known as gene controlled characteristics, breeding for insect resistance should be carried out. 6. Breeding for timber properties. With the tree species for pulp wood in particular, emphasis should be placed upon breeding for high specific gravity of timber. 7. Introduction of Cryptomeria and Japanese Cypress In the light of the fact that the major clones of Cryptomeria are originated from Yoshino source and are being planted up to considerably north and high elevation in Japan, those species should be examined on their cold resistance in Korea by planting them in further northern part of the country.