• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.597-600
• /
• 2008

In this study the reason which researches the feature of the exposure type waterproofing it uses the technique of the soft FRP it uses the soft unsaturated polyester and the square groove cutting technique with respects and solves the interface separate problem because of the rigid FRP it is used with the repairs and retrofit materials it is caused by in adhesion of concrete insufficiency. The feature of this technique was the dispersion and the reinforcement of the fatigue stress due to the integration behavior and the reinforcement due to the glass-fibre of the concrete due to the soft FRP resin and, it investigated the crack appearance confrontation of concrete and the cohesion stability of the concrete due to the square groove cutting technique with importance. The result of research when it applies the soft FRP with the exposure type waterproofing, is judged with the fact that it will be able to expect a bulge resistance confrontation and creak confrontation ability and cohesion stability improvement.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.1
• /
• pp.66-71
• /
• 2013

Soft bending pipe is widely used for freezing equipment and shipbuilding. These pipe have some problems that they cause occasionally outside wrinkle, crack, wall thinning phenomena. However, vending machines which have been made to solve the problems completely, are not yet. In this study, to settle these problems, we proved the effectiveness of the self-made mandrel by results of simulation as the basic for the development of precision high-quality vending machine ; presents the solution method of the wall thinning phenomena by analyzing circular deformation and damage of bending pipe.

• Electrical & Electronic Materials
• /
• v.9 no.1
• /
• pp.93-104
• /
• 1996

연질자성재료는 대부분 직류 및 고주파용 변압기, inductor, 대형 motor, 자기헤드의 자심재료 및 센서등으로 사용되고, 경질자성재료는 주로 motor 및 speaker용으로 사용되며, 자기기록매체재료는 화상, 음성 및 컴퓨터 정보의 기록용으로 사용된다. 특수자성재료로는 microwave용, 전자파 흡수, 열팽창 제어, 기체밀봉등 많은 용도에 이용되고 있다. 최근 국내외에서 수요가 급증하는 첨단 전자기기용 자성재료 시장등이 내구, 내열성 뿐만 아니라 소형화, 경량화 됨에 따라 자성재료의 고성능화를 요구하고 있다. 따라서 본 고에서는 경질자성재료의 개발현황을 살펴보고 자성재료의 고성능화를 위한 연구동향을 생각해 보고자 한다.

• The Journal of the Korean dental association
• /
• v.10 no.1
• /
• pp.35-40
• /
• 1972

저자는 임상에서 널리 사용되는 근관충전재료인 산화아연유지놀, N2, MN2 및 Triozinc Paste의 살균효과를 비교하기 위하여 한천배양기 및 혈액가한천배양기상에서 백색포도상구균 및 α-용혈성연질상구균의 두균주를 사용, 실험하여 다음과 같은 결과를 얻었다. 1) 백색포도상구균을 심은 한천배양기상에서 비건조도판을 사용한 실험군에서의 균성장억제대는 MN2, 6. 83; Triozinc paste, 5. 77; N 2, 5. 61; 산화아연유지놀, 3.49mm였다. 2) 백색포도상구균을 심은 한천배양기상에서 건조도판을 사용한 실험군에서의 균성장억제대는 MN2, 4.40; Triozinc paste, 1.46; 산화아연유지놀, 0.99; ㅜ2, 0.84mm였다. 3) 백색포도상구균을 심은 혈액가한천배양기상에서 건조도판을 사용한 실험군에서의 균성장억제대는 MN 2, 1.15; Triozinc paste, 0.55; 산화아연유지놀, 0.54; N2, 0.43mm였다. 4) α-용혈성연질상구균을 심은 용혈가한천배양기상에서 건조도판을 사용한 실험군에서의 균성장억제대는 MN 2, 2.14; Triozinc paste, 1.00; 산화아연유지놀, 0.75; N 2, 0.43mm였다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.1
• /
• pp.75-80
• /
• 2000

This paper deals with the precision cutting characteristics of mono-crystal diamonds poly-crystal diamonds and tungsten carbide tool on ductile material. The cutting tests were carried out under various uncut chip areas and 20${\mu}{\textrm}{m}$ depth of engagement. The machinability in precision machining was discussed from the viewpoints of the normal cutting forces and the surface roughness of the workpiece. As the feed rate decreases the normal force difference for cutting edge radii appears to large. In various cutting edge radii the surface roughness difference when cut the copper which is ductile material than the aluminium alloy is large. As the same cutting condition the hardness value on cut surface with the diamond tool appears to be smaller than that of the tungsten carbide tool.

• Journal of the Korea Concrete Institute
• /
• v.29 no.2
• /
• pp.131-139
• /
• 2017

Recently, earthquakes have frequently occurred near Korean peninsula. An experimental study is needed for developing a reinforcing method for seismic strengthening to apply to RC structures. Recently, PolyUrea (PU) as structural reinforcement materials has been receiving great interest from construction industry. The reinforcing effect of PU appeared to be excellent under blast and impact as well as earthquakes. In this study, Flexible Type PolyUrea (FTPU) developed in preceding studies was modified to develop Stiff Type PolyUrea (STPU) by varying the ratio of the components of prepolymer and hardener of FTPU. The material performance evaluation has been performed through hardening time, tensile strength and percent elongation test, pull-off test, and shore hardness test. The experimental results showed that STPU has higher tensile strength and lower elongation than FTPU. Therefore, STPU coating agent can be used for semi-permanent products. By using STPU with Fiber-Reinforced Polymer (FRP) on concrete columns, confinement effect can be enhanced to maximize seismic strength and ductility.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.4
• /
• pp.324-332
• /
• 2011

Purpose: The purpose of this study was to compare the stress distribution of teeth and jaw on load by differentiating property of materials according to each layer of widely used mouthguard. Materials and methods: A Korean adult having normal cranium and mandible was selected to examine. A customized mouthguard was constructed by use of DRUFOMAT plate and DRUFOMAT-TE/-SQ of Dreve Co. according to Signature Mouthguard system. The cranium was scanned by means of computed tomography with 1mm interval. It was modeled with CANTIBio BIONIX/Body Builder program and simulated and interpreted using Alter HyperMesh program. The mouthguard was classified as follows according to the layers. (1) soft guard (Bioplast)(SG) (2) hard guard (Duran)(HG) (3) medium guard (Drufomat)(MG) (4) soft layer + hard layer (SG + HG) (5) hard layer + soft layer (HG + SG) (6) soft layer + hard layer + soft layer (SG + HG + SG) (7) hard layer + soft layer + hard layer (HG + SG + HG) The impact locations on mandible were gnathion, the center of inferior border, and the anterior edge of gonial angle. And the impact directions were oblique ($45^{\circ}$). The impact load was 800 N for 0.1 sec. The stress distribution was measured at maxillary teeth, TMJ and maxilla. The statistics were conducted using Repeated ANOVA and in case of difference, Duncan test was used as post analysis. Results: In teeth and maxilla, the mouthguard contacting soft layer of mandibular teeth presented lowest stress measure and, in contrast, in condyle, the mouthguard contacting hard layer of mandibular teeth presented lowest stress measure. Conclusion: For all impact directions, soft layer + hard layer + soft layer, the mouthguard with three layers which the hard layer is sandwiched between two soft layers, showed relatively even distribution of stress in impact.

• Applied Chemistry for Engineering
• /
• v.26 no.1
• /
• pp.59-66
• /
• 2015

A new concept of an inorganic foaming process at low temperature was demonstrated for the production of inorganic thermal insulating materials with the properties of flexible light-weight, the advantages of organic-based thermal insulation material. The foaming process was proceeded by establishing a skeleton of the foam body by using inorganic fibrous sepiolite and aluminum silicate. A cavity was formed by the expansion of fibrous skeleton body, by the gas which was generated from foaming agent at low temperature. Then the multi-vesicular expanded perlite with low thermal conductivity was filled into the cavity in a skeleton of the foam body. Finally through these overall process, a new inorganic foamed body could be obtained at low temperature without the hot melting of inorganic materials. In order to achieve this object, various preparations such as fibrous sepiolite fibrillation process, heat treatment process of the fibrous slurry were needed, and the optimal compositional condition of slurry was required. The foam body produced showed the properties of flexible light-weight thermal insulation materials such as bulk density, yield strength, flexural strength, and high heat resistance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.11a
• /
• pp.38-42
• /
• 1991

Super Duralumin (A2024 - T3)은 가볍고 내식성이 양호할 뿐만 아니라, 석출물($CuAl_2$, $Mg_2$Si)에 의한 시효 경화로 인하여 고강도의 성질을 가지고 있으므로 구조용재, 반공기 및 운반기에 널리 사용되고 있지만, 절삭가공에서 많은 문제점을 내포하고 있다. 따라서 이러한 문제점에 대한 절삭성 향상이 절실히 요구되고 있는 설정이다. 일반적으로 피삭성을 검토하는 경우 철강재료는 공구마멸에 중점을 두지만, Al합금에 있어서는 공구마멸보다는 가공면의 양부를 중요시한다. 이것은 Al이 연질재이므로 절삭시 표면층에 유동이 생겨 양호한 절삭가공면을 얻기 어렵기 때문이다.(중략)

• Korean Journal of Food Science and Technology
• /
• v.11 no.1
• /
• pp.13-17
• /
• 1979

The physicochemical properties of wheat flours were investigated for hard wheat (Bara and Kameriya varieties), semi-hard wheat (Snisen variety) and soft wheat (Ume variety). There were no sigificant differences in the proximate chemical compositions of the tested wheat fluors; however, the protein contents of them were 12.18 to 8.40 % for the hard wheat flours and 6.81 % for soft wheat flour, and gluten contents were 11.77 to 8.38 % for the hard type flours and 5.53 % for soft flour. The soft wheat flour had higher whiteness, whereas the hard wheat flours showed higher starch damage values and higher flour-water absorption than the soft wheat flour. In farinograph data, the hard wheat flours had better development time, stability and valorimeter value of doughs. There were significant differences in the extensigraph data among the tested flours, i,e, resistance to extention and the area with planimeter of doughs increased with the time and their extensibility decreased. The Bara and Kameriya wheat flours had lower maximum visicosity of amylograph than Suisen and Ume wheat flours.