• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.248-259
• /
• 2007

The aim of this research was to study the effect of intermittent polymerization on marginal adaptation by comparing the marginal adaptation of intermittently polymerized composite to that of continuously polymerized composite. The materials used for this study were Pyramid (Bisco Inc., Schaumburg, U.S.A.) and Heliomolar (Ivoclar Vivadent, Liechtenstein) . The experiment was carried out in class II MOD cavities prepared in 48 extracted human maxillary premolars. The samples were divided into 4 groups by light curing method: group 1- continuous curing (60s light on with no light off), group 2-intermittent curing (cycles of 3s with 2s light on & 1s light off for 90s); group 3- intermittent curing (cycles of 2s with 1s light on & 1s light off for 120s); group 4- intermittent curing (cycles of 3s with 1s light on & 2s light off for 180s). Consequently the total amount of light energy radiated was same in all the groups. Each specimen went through thermo-mechanical loading (TML) which consisted of mechanical loading (720,000 cycles, 5.0 kg) with a speed of 120 rpm for 100hours and thermocycling (6000 thermocycles of alternating water of $50^{\circ}C$ and $55^{\circ}C$). The continuous margin (CM) (%) of the total margin and regional margins, occlusal enamel (OE), vertical enamel (VE), and cervical enamel (CE) was measured before and after TML under a $\times200$ digital light microscope. Three-way ANOVA and Duncan's Multiple Range Test was performed at 95% level of confidence to test the effect of 3 variables on CM (%) of the total margin: light curing conditions, composite materials and effect of TML. In each group, One-way ANOVA and Duncan's Multiple Range Test was additionally performed to compare CM (%) of regions (OE, VE CE). The results indicated that all the three variables were statistically significant (p < 0.05). Before TML, in groups using Pyramid, groups 3 and 4 showed higher CM (%) than groups 1 and 2, and in groups using Heliomolar. groups 3 and 4 showed higher CM (%) than group 1 (p < 0.05). After TML, in both Pyramid and Heliomo)ar groups, group 3 showed higher CM (%) than group 1 (p < 0.05) CM (%) of the regions are significantly different in each group (p < 0.05). Before TML, no statistical difference was found between groups within the VE and CE region. In the OE region, group 4 of Pyramid showed higher CM (%) than group 2, and groups 2 and 4 of Heliomolar showed higher CM (%) than group 1 (p < 0.05). After TML, no statistical difference was found among groups within the VE and CE region. In the OE region, group 3 of Pyramid showed higher CM (%) than groups 1 and 2, and groups 2,3 and 4 of Heliomolar showed higher CM (%) than group 1 (p < 0.05). It was concluded that intermittent polymerization may be effective in reducing marginal gap formation.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2007.05a
• /
• pp.281-299
• /
• 2007

IS/IT 분야 실무자가 지니고 있어야 한다고 생각되는 지식과 전문 기술들을 '지식/능력 영역'과 '소프트웨어 전문 기술 영역'으로 구분하여 각각 세부 항목을 명세하였다. 그리고 분류된 두 영역에 대하여 IS/IT 분야 실무자가 생각하는 필요한 지식 및 전문 기술들의 중요도와 IS/IT 전공 교수가 생각하는 IS/IT 실무자에게 필요한 지식 및 전문 기술들의 중요도를 조사하여 두 그룹간의 인식차 비교를 시도하였다. 조사지역은 실무자는 충청지역 및 수도권 지역에 분포하는 SI 업체를 대상으로 이루어 졌다. IS/IT 실무자를 대상으로 한 조사는 실무자 본인의 일장에서 IS/IT 실무자가 갖추어야 된다고 판단되는 지식 및 전문 기술들의 중요도를 측정하였다. 그와 더불어 그들이 수행하는 IS 활동에 대하여 투자한 시간을 기준으로 군집분석을 실시하여 세가지 그룹으로 구분하여 실무자 전체와 세 그룹간의 비교가 가능하도록 조차되었다. 비교 결과, 지식/능력 영역에서는 IS 실무자들이 상대적으로 '하드웨어에 대한 지식', '특정 조직', '운영체제에 대한 지식'에 대해 더 높은 중요도를 부여하고 있는 것으로 나타났다. 소프트웨어 전문 기술 영역에서는 실무자보다 전공교수가 생각하는 중요도가 보편적으로 더 높게 나타났다. 전공 교수는 '프리젠테이션 도구', '객체지향 언어(C++, Java 등)'에 4점 대의 높은 점수를 주어 중요한 것이 무엇인가 하는 인지가 있는 것으로 보이나 실무자 그룹에서는 특별히 중요시 여기는 항목이 명확히 드러나지 않고 보편적인 값이 median 값 주변에 위치하고 있다. 이는 현재 실무자들이 빠르게 변화하고 있는 IS/IT 환경에서 본인의 경력경로 (career path)을 위해 무엇이 중요한 갓인지 아직 명확히 하고 있지 못하는 것으로도 해석이 가능하다. 자세한 비교/분석 및 해석은 현재 진행 중이며, 여러 흥미로운 해석이 가능할 것으로 기대 된다.합형 파괴가 증가하는 경향을 나타내었다. 이상의 결과로, 상아질 접착제의 접착단계/과정이 결합내구성에 영향을 미침을 알 수 있었다. 따라서 접착과정의 단순화가 반드시 접착에 효과적이라고 할 수 없다.는 저작 운동 잔에는 2군에서 Heliomolar가 Pyramid보다 변연적합도가 우수하였고 (p < 0.05) 그 외의 군에서는 유의차가 없었으며, 저작 운동 후에는 모든 군에서 재료간 유의차가 없었다. 각 부위별 변연적합도를 비교하면, 저작 운동 전 Pyramid에서는 교합면 변연에서는 4군이 2군에 비해 높은 변연적합도를 보였고 (p < 0.05), 인접면과 치은면에서는 군 간 유의차를 보이지 않았다. Heliomolar에서는 교합면 변연에서 2, 4군이 1군에 비해 높은 변연적합도를 보였고 (p < 0.05), 인접면과 치은면에서는 군간 유의차를 보이지 않았다. 저작 운동 후 Pyramid에서는 교합면 변연에서는 3군이 1, 2군에 비해 높은 변연적합도를 보였고 (p < 0.05), 인접면과 치은면에서는 군간 유의차를 보이지 않았다. Heliomolar에서는 교합면에서 2, 3, 4군이 1군에 비해 변연적합도가 높았으며 (p < 0.05), 인접면과 치은면에서는 군간 유의차를 보이지 않았다 이번 연구를 통하여 복합레진을 간헐적 광중합시킴으로써 변연적합도가 향상될 수 있음을 알 수 있었다.시장에 비해 주가가 비교적 안정적인 수준을 유지해 왔다고 볼 수 있다.36.4%)와 외식을 선호(29.1%)${\lrcorner}$ 하기 때문에 패스트푸드를 이용하게 된 것으로 응답 하였으며, 남 여 대학생간에는 유의한 차이(p<0.05)가 인정되었다. 응답자의 체형은 ${\ulcorner}$적당하다${\lrcorner}$고 응답한 경우가 가장 많이 이러한 음식을 즐겨 먹었으며(49.5%), 그 다음은 뚱뚱한 경우도 비교적 많이 먹고

• The Journal of the Korea Contents Association
• /
• v.17 no.10
• /
• pp.492-502
• /
• 2017

This study, by analyzing two recent television dramas, attempts to identify the ways how popular cultural texts deal with supernatural beings and to discuss political meanings of the ways in the context of neoliberal Korea. The results are: (1) The narratives make a clear line between the supernatural and the ordinary. (2) The supernatural is effectively used in the narratives to extend the boundary of conflict structure towards structural social problems that the society is now facing. (3) When the text resolving the conflicts, the supernatural is also critical, which makes the whle narrative in line with fantasy rather than reality. These results suggest that the conclusion of the previous studies, arguing the use of the supernatural by popular cultural texts tends to function as a form of resistance against neoliberal discourse structure, needs to be negotiated. It is also reaffirmed that we need to explain political meanings of popular cultural texts dealing with supernatural beings, with its double-sided and ambivalent effects.

• Journal of dental hygiene science
• /
• v.13 no.2
• /
• pp.135-141
• /
• 2013

One factor for successful prognosis of finished dental prosthesis is good marginal fit. The purpose of this study in vitro investigation was to compare the marginal fit of all-ceramic crown before and after porcelain veneering, to evaluate the influence of high temperature of the porcelain firing on the fit. For this experiment, model of abutment tooth of maxillary right central incisor was prepared. Ten working models were produced. Ten zirconia cores were made by dental computer aided design/computer aided manufacturing system. The marginal fit of specimens were examined using silicone replica technique. Silicone replicas were sectioned four times and were measured through a digital microscope (${\times}160$). Marginal fit is a distance connected between edge end part of specimen and abutment margin. Each specimens was measured twice, the first measurement was done prior to veneering porcelain firing, while the second measurement was done after the porcelain firing to evaluate this process. Statistical analyses were performed with paired t-test. $Mean{\pm}SD$ marginal fit was $60.8{\pm}14.2{\mu}m$ for zirconia core and $86.1{\pm}13.3{\mu}m$ for all-ceramic crown. They were statistically significant differences (p<0.001). But all specimens showed a marginal fit where the gap widths ranged within the clinical recommendation ($120{\mu}m$), all-ceramic crown production using the zirconia core was adequate.

• Conservation Science in Museum
• /
• v.25
• /
• pp.1-8
• /
• 2021

This study investigated White Porcelain Water Dropper with Openwork Lotus Scroll Design and Eight Trigram Design in Cobalt-blue Underglaze (hereinafter, the "water dropper") in the collection of the National Museum of Korea using computed tomography (CT). A replica was produced to examine both the structure and its original production method. The CT scanning identified no joint lines or pores in the clay, which suggests that the body (the lower part of the water dropper) was shaped in a single piece using a mold and was then matched with a mold-formed lid (the upper part of the water dropper). The inner container of the body portion was roughly trimmed with a bamboo knife so that its upper surface could be securely attached to the bottom of the lid and prevent any leakage in the joined surface. It appears that the inner container for storing water was made first in a cylindrical shape that met the unit of quantity used at the time and could be easily formed by molding. It was transformed into a trapezoid shape during the process of combining it with the lid. A cylindrical inner container was reproduced using silicon 3D printing to compare its capacity with that of the original inner container. The comparison revealed that the reproduced container had a capacity of 152.5㎖, whereas the original container holds approximately 168.6㎖, a figure similar to three hop (around 174㎖) in Joseon-period units of quantity. Since the capacity of the cylindrical inner container corresponds to a known measure from the late Joseon dynasty, it is likely that the water dropper was originally produced to contain a cylindrical inner container.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.154-169
• /
• 2019

This study attempts to shed light on the nature and purpose of the small melon-shaped celadon ewer that was found in the Sinan shipwreck, focusing on the fact that it has the shape of a ewer, yet could not really have served as a tea or liquor utensil given its small size and unusual shape. We analyzed the shape-related characteristics of other melon-shaped celadon ewers as well as this one; checked the use of similar items unearthed in China and Japan; examined the relevant literature, materials, and paintings; and arrived at the following conclusion. First, it was found that the small melon-shaped celadon ewer was one of a type that was first made in the Southern Song Period in China and continued to be made until the Yuan Period. The artifact displays some differences from many similar relics found in the same shipwreck, particularly its spout, lid, and handle. Second, research on the tea ceremonies and types of liquors prevalent during the Song and Yuan Periods of China, as well as the appearance of this ewer, suggest that it was unsuitable for use as a liquor utensil. Third, we looked at the relevant literature records, paintings, and relics unearthed in China and Japan in an attempt to determine its actual purpose. It is well known that the literati had a deep affection for stationery items, particularly water droppers, which were made in a variety of shapes during the Song Period of China and thereafter. According to literature dating from the Song and Ming Periods, it appears that melon- or ewer-shaped water droppers were used. Certain paintings from the Ming Period depict a small ewer, along with a water dropper, as a stationery item. Looking at paintings dating from medieval Japan, small ewer-shaped objects do not figure among the tea and liquor utensils depicted, whereas kettles with handles and hot water bottles do. Objects known as yeonjeok (a water dropper) were included among the items said to have been made in pottery kilns during medieval Japan. However, a book on flower arrangement of Japan dating from the fifteenth century shows a small ewer, with flowers in it, among the stationery items placed on a desk. Based on this detail, it is concluded that the small melon-shaped celadon ewer from the Sinan shipwreck might have been used as a flower bottle as well as a stationery item.

• The Journal of the Korean dental association
• /
• v.25 no.3 s.214
• /
• pp.289-300
• /
• 1987

• 대한치과보철학회:학술대회논문집
• /
• 1999.11a
• /
• pp.62-62
• /
• 1999

• 대한치과보철학회:학술대회논문집
• /
• 2002.11a
• /
• pp.109-109
• /
• 2002

• 대한치과보철학회:학술대회논문집
• /
• 2002.11a
• /
• pp.113-113
• /
• 2002