• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.2 no.3
• /
• pp.75-86
• /
• 1982

The degeneration of two classes of thick beam elements has been conducted, one (DB6) based on the conventional Timoshenko beam assumptions whereas the other (DB7) based on the assumed cubic axial displacement profile. While an adjustable shear correction factor is required for the DB 6 element to compensate for the unrealistic distribution of shear strain across the thickness, the DB 7 element assumes the more realistic quadratic profile of shear strain at the outset. With the plane-stress continuum solution as reference, solutions obtained by these two element models are compared with the analytical Timoshenko solution, the analytical thin beam solution and several available solutions of other existing beam elements. The result indicates that the performance of the higher order beam element DB 7 is consistently superior to any others. This is true for the whole range of aspect ratios of beam, in both static and free vibration analyses.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05a
• /
• pp.95-98
• /
• 2005

The objective of this experimental study was to understand the structural behavior of reinforced concrete continuous deep beams with welded deformed wire fabric(WWF) as shear reinforcement. The structural behavior of deep beams reinforced with WWF was compared with that of deep beams reinforced with orthogonal shear reinforcement which had standard anchorage corresponding to ACI 318-02. Test results showed that the load transferring capacity and the control of splitting cracks in the strut of WWF were almost as effective as those of orthogonal shear reinforcement with standard anchorage.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.393-396
• /
• 2004

The objective of this experimental study is to understand the shear behavior of reinforced concrete continuous deep beams. The main variables considered were concrete strength and shear span-to-depth ratio. Specimens of 4 two-span continuous deep beams were tested and compared with the strength of simple span beams. The results show that the influence of concrete strength on the shear strength of continuous deep beams is comparable to that on simple span deep beams. However, the effect of span-to-depth ratio is significantly greater than simple span deep beams.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.265-268
• /
• 2006

Recently, many design standards recommend the use of a strut-tie model approach for design of structural concrete with D-region(s). However, since the design standards of the conventional strut-tie model approaches are suggested on the assumption of using a determinate strut-tie model, it is difficult to apply an indeterminate strut-tie model in the design of continuous deep beams. In this study, an indeterminate strut-tie model for continuous deep beams is proposed to resolve the problem, and the ultimate strengths of 35 continuous deep beams tested to failure are evaluated for the validity check of the proposed indeterminate strut-tie model. The analytical results by the proposed model are compared with those by the conventional approaches of ACI 318-99 and ACI 318-05.

• Ecology and Resilient Infrastructure
• /
• v.4 no.1
• /
• pp.54-62
• /
• 2017

This study investigated compound open channel flow using OpenFOAM Large Eddy Simulation (LES). Large eddy simulations were carried out by solving the filtered continuity and momentum equations numerically. One equation LES and non-uniform grid were applied to capture the anisotropic turbulence and secondary flow near the wall. The results of large eddy simulations of turbulent flow in a compound open channel with deep and shallow flood plain depths are presented. These LESs are validated with experimental data, resulting in a good agreement between measured and calculated data. The role of anisotropic turbulence in generating secondary currents is illustrated.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.2023-2027
• /
• 2009

본 연구는 현재와 과거의 하도 지형자료 분석을 통하여 만경강에서 나타나는 폐천(Abandoned channel)을 파악하고, 유형을 폐쇄형, 개방형, 육화형 폐천으로 구분하여 각각의 본류구간과 함께 식물상 및 식생분포 특성을 비교하였다. 만경강의 경우 1918년 하도 형태가 경지정리 및 치수사업에 따른 제방축조 등 인위적인 절단(Engineered cutoff)으로 8개소 이상의 구간에서 하도 선형이 크게 변경됨으로써 폐천이 형성되는 것으로 나타났다. 현재 폐천부지는 육화형태의 농지 이용 및 개방형 또는 폐쇄형의 습지로 유지되는 것으로 조사되었다. 폐천 유형에 따라 나타난 식물상은 폐쇄형 56종류, 개방형 31종류로 조사되었다. 육화형의 본류의 경우 보에 의한 영향으로 달뿌리풀 (Phragmites japonica)과 저수로 검정말(Hydrilla verticillata) 등의 수생식물이 우점하는 정체수역이 나타났다. 개방형 폐천은 갈수기에도 수심이 깊은 수역이 확보되어 본류에 비하여 출현종수가 높았다. 폐쇄형 폐천은 연꽃(Nelumbo nucifera), 애기부들(Typha angustifolia) 등의 다양한 수생식물이 출현하여 본류에 비해 안정된 습지 생태계를 유지하였다. 만경강의 개방형과 폐쇄형 폐천은 수생식물의 증가와 전형적인 습지생태계를 유지하고 있었으며 본류의 정체수역이 관찰되었다. 본래 하천의 연속성을 향상하기 위한 유수생태계의 복원은 하천의 건강성을 향상하기 위한 방안이 될 것이다.

• Ocean and Polar Research
• /
• v.32 no.4
• /
• pp.439-448
• /
• 2010

General consensus on typical vertical profile of dissolved oxygen in the Ulleung Basin is that dissolved oxygen concentration beyond 300 m decreases with increasing depth. However, the results of our observations in 2005 and 2006 revealed three different dissolved oxygen distribution types in the deep layer of the Ulleung Basin. The first type showed oxygen concentration decreasing with increasing depth (Type-1), the second showed oxygen concentration decreasing very sharply near the bottom boundary layer but constant in the bottom adiabatic layer (Type-2), the final was of the oxygen minimum layer above the bottom boundary layer (Type-3). Type-2 was the most common pattern in the Ulleung Basin. Type-1 was most common close to the Japan Basin, including the Ulleung Interplane Gap, while Type-3 was found around Dok do. Oxygen Consumption Rate (OCR) at surface sediment estimated using the dissolved oxygen distribution at the bottom boundary layer was $0.2{\sim}5.8\;mmol{\cdot}m^{-2}d^{-1}$, which coincided with OCR from direct sediment incubation. This implies that organic matter decomposition at surface sediment may play an important role in dissolved oxygen distribution patterns at the bottom boundary layer of the Ulleung Basin.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.4
• /
• pp.217-224
• /
• 2020

In this study, a framework for optimizing the opening in an outrigger wall is proposed. To solve a constrained bounded optimization problem, an in-house finite element program and SQP algorithm in Python SciPy library are utilized. The openings of the outrigger wall are located according to the strut-tie behavior of the outrigger wall deep beam. A linear interpolation method is used to obtain differentiable continuous functions required for optimization, whereas a database is used for the efficiency of the optimization program. By comparing the result of the two-variable optimization through the moving path of the search algorithm, it is confirmed that the algorithm efficiently determines the optimized result. When the size of each opening is set to individual variables rather than the same width of all openings, the value of the objective function is minimized to obtain better optimization results. It was confirmed that the optimization time can be effectively reduced when using the database in the optimization process.

• Journal of the Korean association of regional geographers
• /
• v.8 no.4
• /
• pp.468-479
• /
• 2002

This study attempts to characterize Taebaek mountainous region as a natural unit, relating to morphoclimatic milieu and landform development patterns of the mountains of each lithologic type. In the case of granitic mountains of Nothern parts of this region, the slopes presents more or less steep or irregular profile because of abundant microforms of exposed bedrocks and blocks. The development of such landscape is essentially due to differential weathering, associated with difference of joint density. In the case of gneissic mountains, the slopes are well regularized straight steep ones, due not only to generalized superficial weathering but also to massmovement of weathered materials. In the Middle parts of this region, especially in Taegwallyong area, with frequent alternations both of freezing-thawing and of snow accumulation-melting, the roles played by cryo-nival processes proved to be important in weathering of granite as well as in morpho-pedogenesis. In this area, weathered mantle, developed by cryogenic activity under humid condition of nival environment, covered almost all over the slopes. Although Southern parts of this region consist of limestone, on the mountainous volume, distribution of Karst forms are limited while predominate none karst forms such as cockpit type peaks, V-shaped type valleys dissecting steep slopes covered with thin deposits in thickness containing rock debris.

• The Journal of the Korea Contents Association
• /
• v.12 no.2
• /
• pp.116-126
• /
• 2012

As a film maker, Lee Chang Dong stands out from most Korean film makers who work within the trappings of genre films. To be sure, Lee has also used the trappings of genre films, such as noire and melodrama, but primarily as a tool to communicate with film audience. In his most recent film "Poetry", Lee seems to have even stripped even the minimal trappings of genre film. Lee commands the audience to self-reflect and work towards their own conclusions by denying them the illusory identification on screen. In this way, Lee's works are counter cinema. Lee achieves a distancing effect using such filmic apparatuses as hand-held camera, fantasy, mise en abyme, and returned gaze. Through these filmic apparatuses, Lee exposes the re-presentation of text and compels his audience to see the historical and political contexts of the text. In this study, I make the case that Lee Chang Dong's film making is an act of repetition compulsion that cultivates ethical reflection, through symbolization of the invisible realities.