• Analytical Science and Technology
• /
• v.37 no.3
• /
• pp.174-188
• /
• 2024

This review summarized research trends regarding sample collection methods, pretreatment method, and types of analysis devices for microplastics (MPs) in soil and groundwater matrices. Soil sampling considers the selection of sampling location, depth, and volume. The typically sampling depth is within 15 cm (topsoil), and about 1 kg of mixed each sample. Among spot sampling and continuous flow sampling, groundwater sampling mainly used a continuous flow sampling, with collection rates 2 to 6 L/min in the range of 300~1,000 L, and followed by immediate on-situ filtration. Pretreatment method, applied to soil and groundwater, consist of organic digestion and density separation. In the organic digestion method, H₂O₂ is recommended among H₂O₂, acidic, alkaline, and enzymatic method. NaCl is primarily used as a reagent in density separation. However, depending on the density of MPs, other regents can be selectively used like ZnCl₂, ZnBr₂, and etc. Representative analysis device includes Fourier Transform Infrared (FTIR) and Raman spectroscopy for non-destructive analysis and Pyrolysis Gas Chromatography Mass Spectrometry (Py-GC/MS) for destructive analysis. µ-FTIR and Raman can count MPs of larger than 10 and 1 ㎛, and analyze MPs materials. However, it is need to sufficiently remove interference, like organic matter, in spectroscopic analysis using essential pretreatment method. Py-GC/MS is being continuously researched because it doesn't require complex pretreatment method and allows quantitative analysis of specific materials.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.4
• /
• pp.535-543
• /
• 2002

In this paper, we propose $\pi$/8 shift 8PSK and trellis-coded $\pi$/8 shift 8PSK-OFDM techniques by applying $\pi$/4 shift QPSK to trellis-coded modulation (TCM), and performing signal set expansion and set partition correspondingly based on phase difference. In our Viterbi decoding algorithm, up to L phase differences from successively received symbols are employed in the new branch metrics. Such sliding multiple symbol detection (SMSD) method provides improved bit-error-rate (BER) performance in the differential detection of the trellis-coded $\pi$/8 shift 8PSK-OFDM signals. The performance improvements are achieved for different communication channels without sacrificing bandwidth and power efficiency. It thus makes the proposed modulation and sliding detection scheme more attractive for power and band-limited systems.

• The Journal of the Korea Contents Association
• /
• v.17 no.2
• /
• pp.535-542
• /
• 2017

There is a big difference of discharge rate between drought and flood period in Korea since the importance of water resources management has come to the fore. To know a river characteristics, it needs to estimate river discharge accurately. River discharge is calculated using the measured velocity of cross section and the estimated area of watercourse as input parameters into continuity equation. Generally, flow rate over a river is estimated from the relation equation between level and discharge, in this case, there are weakness for only the equal depths and the equal discharge estimated. In the present study, therefore, water surface slope was estimated using measured water level of Seongseo water level observation station and measured water level using ADVM at Gangchang Bridge. And then, we developed the discharge calculation equation using water surface slope. A method to easily calculated flow rate from the measured depth of the two points that are suggested by reflecting water surface slope because natural stream is unsteady flow, not uniform flow or not steady flow.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.62-68
• /
• 2018

This study was conducted to improve the shooting stability of self propelled artillery by improving the flick rammer system. The flick rammer system is designed to reduce crew fatigue and shorten the movement and loading time of the shell compared with the conventional manual loading system. Basically, in the flick rammer system of the shooting type, fall-back occurs intermittently, which causes problems in the rapid loading. To solve this problem, a detailed C.A.E. (Computer Aided Engineering) analysis of the internal structure of the existing rapid loading field was conducted. Through this, we sought a solution that can prevent fall-back by reducing the flying distance. We then optimized the loading station to reduce the flying distance and confirmed the possibility of suppressing the fall-back compared to the existing product through actual tests in the field.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.377-377
• /
• 2015

부유사 자료는 유사이송해석에 필수적인 요소로 하천의 흐름 변화 및 하상 변동을 발생시키고, 하천 구조물의 설계, 수자원 개발 및 관리를 위한 하천계획의 전반에 있어 매우 중요한 자료이다. 부유사 농도는 수자원의 이용뿐만 아니라 하천 생태계에까지 피해를 미친다는 점에서 하천의 유지 관리 및 보수와도 밀접한 관련이 있다. 부유사량을 산정하는 방법에는 수리량 및 하상토 특성 자료를 유사량 공식에 대입하여 계산하는 간접적인 방법과 유사량을 직접 측정하는 방법으로 나뉜다. 현재 국내에서는 유사량 채집기를 사용하여 실제 하천의 유사량을 채집하는 방식으로 많이 사용되고 있으나, 많은 인력과 시간이 소모되기 때문에 다지점 계측과 지속적인 계측이 힘들다는 한계점를 보이고 있다. 또한 국내 하천에서는 홍수기를 거치면서 하천의 수리학적 특성이 변화하는 경향을 보여주고 있어 유량-부유사 관계식을 자주 갱신해야 한다는 어려움이 있다. 이에 본 연구에서는 현재 국내에서 사용하고 있는 직접적인 측정 방법의 한계점을 보완하고자 직접적인 측정 방법 중 초음파를 이용하여 횡단면 전체의 유사량 측정을 연속적으로 할 수 있는 수평초음파도플러유속계(H-ADCP)를 활용하여 유사량을 추정할 수 있는 기법을 개발하고자 한다. 본 연구의 연구는 건설기술연구원 하천실험센터의 직선수로에서 수행되었다. H-ADCP (SonTek SL3000, 셀 크기 4 cm)를 사용하여 자연상태 흐름조건 (유속 0.7 m/s)에서 초음파산란도(Backscatter, 혹은 신호대잡음비 SNR) 및 유속자료를 2분 간격으로 확보하였다. 그리고 부유사 농도(SSC)의 측정 정확도가 높다고 평가되고 있는 레이저부유사측정기(LISST-100)를 활용하여 부유사 농도를 실측하여 초음파산란도와 실측 SSC의 관계를 도출하고 그 경향을 분석하였다. 또한 초음파산란도의 흡수 등을 보정하고 실측 부유사자료와의 관계식을 기반으로 H-ADCP를 활용하여 실시간으로 부유사 농도를 산정할 수 있는 소프트웨어를 개발하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.493-493
• /
• 2017

부유사 수리실험에서 부유사의 농도를 측정하는 것은 불확실성이 매우 크다. Einstein(1950)은 유사의 pickup function 결정에서 이러한 불확실성 때문에 유사입자의 거동을 발생시키는 양력의 확률을 적용하기도 하였다. 일반적으로 부유사의 측정은 부유사 채집기를 통해 수행하지만, 시간적으로 비효율 적이며, 채집 시 채집기의 부피로 인한 난류 발생으로 채집 후 흐름 변화가 발생할 수 있다. 수리실험의 규모라면 이 문제는 더욱 부각될 수 있다. 연속적인 부유사의 농도 측정을 위해 이러한 점은 개선되어야 하는 문제이다. 본 연구에서는 유사 실험의 이러한 단점을 극복하고자 image processing 기법을 적용하였다. Image processing은 부유사의 농도가 증가할수록 탁도가 증가하는 특성을 이용하여, 부유사 농도를 추정하는 방법이다. 이 과정에서 RGB(Red-Green-Blue)로 색을 표시하는 방식에서 image를 변환하여 gray scale로 전환해야 하며, 파(wave)의 전파에 의한 image 결과의 변형은 없다고 가정하였다. Gray scale과 탁도와의 관계를 도출하기 위해 하상에 유사를 포설하고, 단파(surge)를 발생 시켰다. 실험은 길이 12.0m, 폭 0.8m, 높이 0.75m의 개수로에서 수행하였으며, 수로 상류에 sluice형 gate를 급격하게 개방하는 것으로 단파를 재현하였다. 탁도 측정을 위해 유사 채집기를 이용하였으며, 상기에서 제시한 흐름 교란문제로, 1지점에서 1개의 시간동안만 채집을 수행하였으며, image의 촬영을 병행하였다. 또한 data의 정확도를 높이기 위해 3번의 반복실험을 수행하였다. 실험결과 gray scale과 탁도와는 일정한 관계가 나타났으며, 이를 토대로 gray scale-SSC(suspended sediment concentration)와의 관계를 도출하였다. Bayesian 분석을 이용하여 image processing의 보정(확률적 보정)을 추가적으로 수행하였다. 최종적으로 실측한 값과 image processing을 통한 값을 1:1 curve를 통해 비교하였으며, 약 9%의 평균 오차가 발생하여, image processing과 bayesian 적용을 통한 부유사 농도 측정은 신뢰할 만한 결과를 도출하는 것으로 판단된다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.219-222
• /
• 2011

There are number of methods that track the movement of an object or the change of state, such as Kalman filter, particle filter, dynamic clustering, and so on. Amongst these method, dynamic clustering method is an useful way to track cluster across multiple data frames and analyze their trend. In this paper we suggest the similarity-based dynamic clustering method, and verifies it's performance by simulation. Proposed dynamic clustering method is how to determine the same clusters for each continuative frame. The same clusters have similar characteristics across adjacent frames. The change pattern of cluster's characteristics in each time frame is throughly studied. Clusters in each time frames are matched against each others to see their similarity. Mamdani fuzzy model is used to determine similarity based matching algorithm. The proposed algorithm is applied to radar reflectivity data over time domain. We were able to observe time dependent characteristic of the clusters.

• Journal of the Korea Computer Graphics Society
• /
• v.16 no.4
• /
• pp.35-40
• /
• 2010

Due to the distribution of digital camera, many work for photo management has been studied. However, most work use a sequential grid layout which arranges photos considering one criterion of digital photo. This interface makes users have lots of scrolling and concentrate ability when they manage their photos. In this paper, we propose a clustering method based on a temporal sequence considering their color similarity in detail. First we cluster photos using Cooper's event clustering method. Second, we makes more detailed clusters from each clustered photo set, which are clustered temporal clustering before, using maximal clique finding algorithm of interval graph. Finally, we arrange each detailed dusters on a user screen with their overlap keeping their temporal sequence. In order to evaluate our proposed system, we conducted on user studies based on a simple questionnaire.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.4 s.42
• /
• pp.137-145
• /
• 2006

A user remembers a melody as not the combination of pitch and duration which is written in score but the contour which is composed of the relative pitch and duration. Because of the way of remembering a melody the previous Music Information Retrieval Systems which uses keyboard Playing or score as the main input melody are not easily acceptable in Query By Humming Systems. In this paper, we mention about the considerable checkpoints for Query By Humming System and previous researches. And we propose the feature extraction which is similar with the way of remembering a melody and similarity computation algorithms between melody in humming and melody in music. The proposed similarity computation algorithms solves the problem which can be happened when only uses the relative pitches by using relative durations.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.12
• /
• pp.689-695
• /
• 2015

A biofilm filtration for the removal of gaseous pollutants has been recognized as a process with a complex interaction between the gas flow characteristics and the process operating variables. This study aims to develop an one dimensional dynamic numerical model which can be utilized as a tool for the analysis of biofilm filtration process operated in plug flow mode. Since, in a plug flow system, minor environmental changes in a gaseous unit process cause a drastic change in reaction and the interaction between the pollutants is an influencing factor, plug flow system was generalized in developing the model. For facilitation of the model development, dispersion was simplified based on the principles of material balance. Several reactions such as competition, escalation, and control between the pollutants were included in the model. The applicability of the developed model was evaluated by taking the calibration and verification steps on the experimental data performed for the removal of BTX at both low and high flow concentration. The model demonstrated a correlation coefficient ($R^2$) greater than 0.79 under all the experimental conditions except for the case of toluene at high flow condition, which suggested that this model could be used for the generalized gaseous biofilm plug flow filtration system. In addition, this model could be a useful tool in analyzing the design parameters and evaluating process efficiency of the experiments with substantial amount of complexity and diversity.