• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.3
• /
• pp.48-54
• /
• 2015

In this study, we propose an innovative lateral force distribution building system between tall buildings by utilizing the difference of moment of inertia, resulting the reduction of lateral displacement and the lateral forces in terms of an alternative for the dense human and increased cost of lands in highly integrated city area. A successive collapse prevention means by providing additional bearing plate between connections is proposed. In addition to that, a more economical vibration reduction is expected due to the suggested tuned mass damper on the surface of spacial structure. In the considered verification examples, reduced drifts at the top location of the building systems are validated against static wind pressure loads and static earthquake loads. The suggested hybrid building system will improve the safety and reliability of the new or existing building system in terms of more than 30% reduced drift and vibration through the development of convergence of tall buildings and spatial structures.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.4
• /
• pp.303-314
• /
• 2024

Recently, the consecutive shield tunnel boring machine (TBM) has gained attention for its potential to enhance TBM penetration rates. However, its development requires a thorough risk assessment due to the unconventional nature of its equipment and hydraulic systems, coupled with the absence of design or construction precedents. This study investigated the causal relationships between four accidents and eight relevant sources associated with the consecutive shield TBM. Subsequently, risk levels were determined based on expert surveys and a risk matrix technique. The findings highlighted significant impacts associated with collapses or surface settlements and the likelihood of causal combinations leading to misalignment. Specifically, this study emphasized the importance of proactive mitigation measures to address collapses or surface settlements caused by inadequate continuous tail void backfill or damaged thrust jacks. Furthermore, it is recommended to develop advanced non-destructive testing technology capable of comprehensive range detection across helical segments, to design a sequential thrust jack propulsion system, and to determine an optimal pedestal angle.

• Fire Science and Engineering
• /
• v.31 no.3
• /
• pp.79-87
• /
• 2017

Sandwich panels which are having the both sides are bonded with a heat insulating material with an iron plate are used as factories, warehouse structures as advantages of convenience in construction at economic efficiency of material cost. However, in a panel structure constructed by continuous joining of sandwich panels, a joint portion where a panel and a panel are connected is generated. The joint part is a part which is easily vulnerable to fire because flames easily flow into the melting and deformation of the iron plate during fire. The flames flowing into the panel induce diffusion of fire by rapid burning, causing damage of human life and property. In this research, we developed a flame spread prevention plate to prevent spreading of sandwich panel. This is an improvement of the workability by the anti-spreading construction method of the existing previous research, it can be applied independently to the connecting part where the panel and the panel are coupled, designed to prevent inflow and spreading of flame did. The actual fire test of the test method of KS F ISO 13784-1 of the sandwich panel specimen was conducted and the burning behavior corresponding to the presence or absence of application of the flame spread prevention plate was grasped at the panel connection part and its effect was measured. Inserting a fire spreading plate into the test result panel connecting part is measured by delaying the flashover, prevention of collapse of the specimen, and temperature rise of the opening, effectively improving the fire safety of the panel structure It was confirmed as a method that can be secured. It is judged that panel structure will contribute to ensuring fire safety by applying the fire spread prevention construction method of various methods ensuring the workability and economy of panel connection vulnerable to fire.

• Journal of Navigation and Port Research
• /
• v.31 no.3 s.119
• /
• pp.271-279
• /
• 2007

Ship structures are basically an assembly of plate elements and estimation load-carrying capacity or the ultimate strength is one of the most important criterion for estimated safety assessment and rational design on the ship structure. Also, Structural elements making up ship plated structures do not work separately against external load. One of the critical collapse events of a ship structure is the occurrence of overall buckling and plastic collapse of deck or bottom structure subjected to longitudinal bending. So, the deck and the bottom plates are reinforced by a number af longitudinal stiffeners to increase their strength and load-carrying capacity. For a rational design avoiding such a sudden collapse, it is very important to know the buckling and plastic behaviour or collapse pattern of the stiffened plate under axial compression. In this present study, to investigate effect af modeling range, the finite element method are used and their results are compared varying the analysis ranges. When making the FEA model, six types of structural modeling are adopted varying the cross section of stiffener. In the present paper, a series of FEM elastoplastic large deflection analyses is performed on a stiffened plate with fiat-bar, angle-bar and tee-bar stiffeners. When the applied axial loading, the influences of cross-sectional geometries on collapse behaviour are discussed. The purpose of the present study is examined to numerically calculate the characteristics of buckling and ultimate strength behavior according to the analysis method of ship's stiffened plate subject to axial loading.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.492-492
• /
• 2021

최근 세계적으로 기상이변에 의해 한파와 폭설이 발생하고 있으며, 이로 인한 피해를 예측하기 어려워 졌다. 우리나라의 대설피해는 지역별로 상이해 강설 특성을 파악하기 위해 강설자료와 과거의 기상현상자료를 분석하여야 한다. 대표적인 대설피해로 설압피해, 적설피해, 착설피해와 간접피해로 분류 되며 시설재배면적에 가장 많은 영향을 미치는 설압피해는 쌓인 눈의 압력으로 인하여 파손 및 붕괴를 유발한다. 본 연구에서는 과거 재해연보 자료(1994년~2018년)와 기상청에서 제공되는 적설자료를 활용해 대설피해 관련 자료를 수집 및 분석하여 온실에 손상을 입힐 수 있는 적설심을 분석하였다. 로지스틱 회귀분석을 위한 자료 구축은 재해연보의 피해기간을 기반으로 하여 종속변수로 사용하였다. 이후 적설심자료를 최심신적설로 변형하였으며 온도와 함께 독립변수로 사용하였다. 우리나라의 대설 사례가 많은 영동지역은 강설빈도가 높아 대설 방지대책 및 대설 연구자료가 다른 지역에 비해 많은 것으로 판단된다. 이에 따라 최근 빈도가 증가하고 있으며 대설피해 사례가 10건 이상이고 관측지점이 피해지역과 가까운 지역, 적설관측자료가 연속적으로 관측되어 있는 남원, 보령, 장수, 부안을 공간적 범위로 선정하였다. 연구의 결과로 대설 피해 재난관리가 가능한 적설심 기준 설립에 도움을 줄 것으로 판단된다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2017.11a
• /
• pp.329-330
• /
• 2017

재난은 인류의 발전과 더불어 다양하게 발생되어왔다. 최근 21세기 들어 발생하는 재난은 그 현상이 더욱 다양하고 복잡하며 그 피해의 정도가 대규모로 진행되는 경우가 많아 졌다. 태풍, 집중호우, 강풍, 폭설, 지진, 황사 등의 자연재난은 지구온난화현상으로 국내뿐만 아니라 전 세계적으로 커다란 영향력을 미치고 있으며, 화재, 구축물의 붕괴, 지하철사고, 테러 및 감염병 등의 사회 재난도 더욱더 증가하고 있는 추세이다. 나아가 사스, 메르스, 지카 바이러스 및 대형 테러 등 전 세계적 차원의 사회 재난의 발생 또한 급증하고 있다. 이와 같이 현대사회에서 발생하는 재난는 개인이나 국가의 정책만으로 예방하고 관리할 수 없는 특성이 있다. 따라서, 자본주의 경제의 한축을 이루고 있는 기업의 재난을 관리하여 연속성을 확보하고 더나아가 리질리언스(Resilence)를 보장하기 위한 일환으로 2007년 7월 재해경감을 위한 기업의 자율 활동 지원에 관한 법률(이하, 기업재해경감법 이라함.)이 공포된 지 약 10여년이 경과하였다. 이는 법 제도화를 통하여 기업의 재해경감활동을 지원하기 취지에서 출발한 것 이다. 그 후 현재 까지 어느 정도의 발전이 있었지만 경과 년 수에 비해 아직 미흡한 실정이다. 이후 그 기업들이 좀 더 원활하게 재해경감활동을 위한 계획을 수립, 실행, 검토 및 유지하기 위한 지침으로서 기업재난관리표준을 2010년 4월 2일 제정하였고 이후 재해경감활동 수립계획을 제정하여 시행하기에 이르렀다. 또한, 기업재난관리표준은 제정된 이후 2013년 12월 9일 전면 개정작업을 통해 경영관리 프로세스 모델(Plan-Do-Check-Act)이 적용된 관리체계를 접목시키고 용어정의를 국제표준과 일치시켜 기업재해경감활동 상의 혼선을 방지하기 위한 노력을 하였다. 현 정부에서는 주무부처가 바뀌고 조직이 변화되어 행정안전부고시 제2017-1호(2017.07.26.일)로 개정되어 현재에 이르고 있다. 본 논문에서는 기업재난관리표준과 연관된 제반 법령 및 규정 등에 대한 법적성격 과 지위를 규명하고, 기업재난관리표준의 관련분야 적용 시 문제점 및 바람직한 제도개선 방향을 제시하고자 한다.

• Journal of Korean Society of Forest Science
• /
• v.78 no.2
• /
• pp.228-241
• /
• 1989

The objectives of this study are to identify flood disasters resulted from heavy rainstorm including earth and stone-debris avalanches and also to develope the scientific data to be needed for establishing the landslide-related disaster prevention countermeasures. For this study, 5 Gun (district) regions including Booyeo, Seochun, Gongju, Boryung, and Chungyang in Chungchongnam-do of the central part of Korea, in which severe landslide damages have been triggered during 3 days from July 21 to July 23, 1987, were investigated. Mostly, landslides having death of human lives triggered from 6 a.m, to 8 a,m. on July 22, and the principal factor was proved to be the continuous heavy rain ; the continuous rainfall of internal region for 3 days measured about 300-673 mm. The structural measures for slope failure prevention countermeasures at the hollow part of upper hillslope should be required. Natural drainage network on slopes should not be disturbed in case of land use alteration, such as a chestnut planting work on hillslopes behind the houses particularly. There are so many problems in recognition of landslide disaster prevention countermeasures including evacuation exercises. More actual education of countermeasures for control of flood and landslide should be put to practice through "civil defense education" and "inhabitants' meeting." In this context, existing Erosion Control Stations of 13 regions established in each Province should not be reduced. The designation criterion and surveying processes of "Landslide Prone Site" published by Forest Administration should also be improved scientifically.