• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.6
• /
• pp.51-57
• /
• 2007

Creep-feed grinding is an effective technology processes to increase the productivity and efficiency in form grinding. This method has, however, some problems which the progress of abrasive wear around the cutting edge is remarkable, grinding force become intense and burn marks on the ground surface occur frequently. In order to solve this problems, it is proposed in this study to dress the grinding wheel continuously during the grinding process. The purpose of this research is. therefore, that CNC creep-feed grinding machine which has a continuous dressing device developed and some grinding experiments for determination of dressing conditions carried out.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.9
• /
• pp.18-24
• /
• 2001

• Journal of Korean Biological Nursing Science
• /
• v.5 no.1
• /
• pp.23-33
• /
• 2003

This morphological study was carried out to investigate the healing effect of open and occlusive dressing on rabbit skin wounds. The male white rabbits were given incision wound measuring 1.0cm in length and excision wound measuring $1.0{\times}0.2cm$ respectively on backs. Five rabbits among their received sterilization with beta dine twice a day and kept wound open. Another group of rabbits received sterilization and occlusive dressing with application of 1% sulfadiazine ointment and covering of gauze. The rabbits were observed at 5, 10, and 15 days after dressing with light microscope. The results were as follows. Both incision and excision wounds received open and occlusive dressing respectively revealed formation of scab and regeneration of epidermal epithelial cells at wound margin. The superficial dermis showed infiltration of neutrophils, monocytes, and lymphocytes, fibroblastic proliferation, and edema. On 10 days after opera and occlusive dressing the scab had disappeared and regeneration of epidermal epithelium was completed. The capillaries and inflammatory cells were decreased in number. However, edema and fibroblastic proliferation were more pronounced. On 15 days after opera and occlusive dressing, there were keratinization of regenerated epidermal epithelium, loss of inflammatory infiltration, edema, and capillary proliferation, and increase of fibroblastic proliferation and collagen fibers. The amounts of scars were less in incision wound than of excision one. There were no differences in healing processes between both dressing methods. According to the above results, it was conceived that sterilization of wound is more important in wound healing than dressing method in trivial wounds.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.8
• /
• pp.1298-1310
• /
• 1997

In recent years, grinding techniques for precision machining of brittle materials used in electric, optical and magnetic parts have been improved by using superabrasive wheel and precision grinding machine. The completion of optimum dressing of superabrasive wheel makes possible the effective precision grinding of brittle materials. However, the present dressing system cannot have control of optimum dressing of the superabrasive wheel. In this study, a new system and the grinding mechanism of optimum in-process electrolytic dressing were proposed. This system can carry out optimum in-process dressing of superabrasive wheel, and give very effective control according to unstable current and gap increase. Therefore, the optimum in-process electrolytic dressing is a good method to obtain the efficiency and mirror-like grinding of brittle materials.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.3
• /
• pp.785-792
• /
• 1994

Ferrite is widely used in the material of magnetic head, but is difficult of grinding because of their brittleness and hardness. Therefore, diamond wheel with superabrasive is required for surface grinding of this brittle material. But the conventional dressing method can not apply to the diamond wheel with superabrasive. In this study describes a newly proposed method for carrying out effective inprocess dressing of diamond wheel with superabrasive. Using the IEDD the surface roughness of workpiece was improved and grinding force was very low. Resently IEDD is good method to obtain the efficiency grinding and surface grinding of brittle materials.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.3
• /
• pp.1-7
• /
• 2003

In-process Electrolytic Dressing is a lapping method using electrolysis. This technology provides dressing to CIB-Diamond Lapping wheels during the lapping process for continuous protrude abrasive from super-abrasive wheels. so loading and glazing are disappeared apparently. Ultra-precision lapping of the machinable commies will be studied in the viewpoint of In-process Electrolytic Dressing. For ultra-precision lapping, need to develop an ultra-precision lapping system suitable metal bonded diamond wheel, and appropriate condition of u10a-precision lapping machining.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.5
• /
• pp.34-39
• /
• 2000

Application of ceramics has grown considerably due to significant improvement in their mechanical properties such as light weight, chemical stability and superior wear resistance. Despite these character, the use of ceramics has not increased because of poor machinability. The method of using of super-abrasives metal bond wheel was proposed. But it is difficult that super-abrasives metal bond wheel can be dressed. Recently, the technology of in-process electrolytic dressing is developed to solve this problem. If this method is applied, loading and glazing are disappeared apparently. The aim of this study is to determine the machining characteristics in terms of lapping wheel speed, machining time, pressurized weight to the workpiece and peak current using in-process electrolytic dressing applied to the CIB-diamond lapping wheel to achieve ultra-precision lapping machining technique.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.508-511
• /
• 2002

With increasing the needs for micro and precision parts, micro machining technology using micro tools has been studied to fabricate a small part with high density such as electronics, optics, communications, and medicine industry more than before. Though these micro tools have developed rapidly, it is difficult to apply them to micro fabrication technologies, because of the inherent manufacturing. In this study, micro tools(wc) to produce micro structures and parts were manufactured by cylindrical grinding machine employing ELID(Electrolytic In-process Dressing) technique and good dimensional accuracy was achieved. Furthermore we researched the characteristics of machining on the micro drilling using micro drills and manufactured micro tools. Finally it is confirmed that manufactured micro tools can be used for micro machining.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.914-917
• /
• 2000

Application of ceramics, carbide, ferrite has grown considerably due to significant improvement in their mechanical properties such as light weight, chemical stability , super wear resistance and electronical. Despite these character, the me of advanced material has not increased because of poor machinability. The method of using of metal bond wheel was proposed. But it is difficult that metal bond wheel can be dressed. Recently, the technology of in-process electrolytic dressing is developed to solve this problem. This method need wheel for electrolytic dressing, power supply and electrolyte. But development of wheel for electrolytic dressing is the most need. The aim of this study is development of wheel for electrolytic and appraisement of CIB-diamond lapping wheel

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.12
• /
• pp.171-178
• /
• 2002

With increasing the needs for micro and precision parts, micro machining technology using micro tools has been studied to fabricate a small part with high density such as electronics, optics, communications, and medicine industry more than before. Though these micro tools have developed rapidly, it is difficult to apply them to micro fabrication technologies, because of the inherent manufacturing. In this study, micro tools (WC) to produce micro structures and parts were manufactured by cylindrical grinding machine employing ELID (Electrolytic In-process Dressing) technique and the micro tools are fabricated as square shape with the dimension less than 100${\mu}{\textrm}{m}$. With the micro tools on the same machine, characteristics of micro grooving and drilling are evaluated. Also we compare normal micro machining with ultrasonic micro machining on the vibration table. It is confirmed that the developed micro tools are fully applicable to micro grooving, micro drilling and free form cutting.