• Journal of Korea Water Resources Association
• /
• v.37 no.4
• /
• pp.257-271
• /
• 2004

To evaluate behavior in representing solute transport in natural streams, the storage zone model of the axially periodic transient storage zones is developed. The periodic transient storage zone model and continuous storage zone model are verified using the parameters and the tracer concentration vs. time curves observed in laboratory channels. The periodic storage zone model best fit the measured concentration vs. time curves, while the continuous storage model fails to describe some fluctuations and the plateau region of the tail occurring in a discontinuous transient storage system. Dispersion data from Shingobee River, Minnesota, U. S. A. show that the concentration curves simulated by the proposed model fit the observed concentration curves well.

• The Journal of Engineering Geology
• /
• v.4 no.1
• /
• pp.1-12
• /
• 1994

In general there are many cracks in rocks. In this study, we are concerned with the mechanical effect on cracks on the behavior of rocks. For this purpose, we used spedmens rnade of mortar having one crack set which has a constant length and same direction. Orientafion of this set was varied with respect to the loading axis. We did a number of uniaxial experiments and observed propagafion of the crack set to understand the effect set of the geometry of the crack set and its location on the mechanical behavior of the rocks with distributed crack sets. Finally, we analysed our experiments by FEM elastic analyses and Homogenization theory.

• Journal of the Korean Institute of Gas
• /
• v.2 no.4
• /
• pp.73-78
• /
• 1998

This paper considers the applicability of a pseudosteady-state approach to the long-time behavior of real gas flow in a closed reservoir. The method involves a combination of a linearized gas diffusivity equation using a normalized pseudotime and a material balance equation. For the simulation of field-scale problems with multiple wells of differing production rates over extended production periods, the pseudosteady-state equation was solved successively for each flow period. Results from this study show that the approach provides a fast and accurate method for modeling the long-time behavior of gas reservoirs under depletion conditions.

• Computational Structural Engineering
• /
• v.7 no.1
• /
• pp.83-90
• /
• 1994

This study presents the nonlinear dynamic analysis method of the bridge with the seismic isolation bearing. Also the numerical analyses are performed for investigating the response characteristics of the bridge isolated with the lead-rubber bearing under the ground motions compatible to Korea bridge design response spectra. It is found that the pier design force can be considerably smaller than the one for the bridge with the fixed bearing. It is observed that the lead-rubber bearing has the great effectiveness for reducing the longitudinal seismic force in case of the bridges with low and medium periods. Therefore the seismic isolation bearing can be used instead of the fixed bearing for the economic and safe design of the bridge.

• Tunnel and Underground Space
• /
• v.25 no.1
• /
• pp.68-75
• /
• 2015

Rock mass includes such discontinuities as fault, joint, bedding, crack, schistosity, cleavage. The rock mass behavior, therefore, is influenced by the discontinuity behavior. In this study, a stability and deformation analysis method considering discontinuities in rock mass is proposed, and then applied to the rock collapse disaster site. As the method, the stability analysis by the stereographic projection method was carried out in an actual site, the deformation analysis program by the finite element method including the joint element was developed, and performed. To demonstrate the applicability of this developed stability and deformation analysis method considering discontinuities in rock mass, the analysis results are examined and compared with the failure behavior at the rock mass.

• Composites Research
• /
• v.17 no.5
• /
• pp.78-84
• /
• 2004

In this paper, a study of thermal response of two types of functionally graded materials (FCM) plates composed of $\textrm{Al}_2\textrm{O}_3$ and Ti-6Al-4V is presented. The material properties of the functionally graded plates are assumed to vary continuously through the thickness of the plate according to a power law distribution of the volume fraction of the constituents. It is supposed that the top and bottom surfaces of the plate are heated and kept as constant thermal boundary conditions. The fundamental equations for rectangular plates of FGM are obtained using Hamilton's variational principles. The solution is obtained in terms of Navier Solution. The influence of volume fraction and temperature is studied on the static deflection and natural frequency of FCM plate.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.2 s.45
• /
• pp.123-131
• /
• 2000

In this study, both experimental and analytical study for behavior of the existing composite steel box girder bridges, constructed along with the procedure of continuous placing slab, are conducted to establish the validity of the proposed model. The layer approach is adopted to determine the equilibrium condition in a section to consider the different material properties and concrete cracking across the sectional depth, and the beam element stiffness is constructed on the basis of the assumed displacement field formulation and the 3-points Gaussian Integration. In addition, the effects of creep and shrinkage of concrete for time-dependent behavior of the bridge are taken into consideration. Finally, both analytical and experimental results are compared.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.2
• /
• pp.105-113
• /
• 1999

This paper resents a prediction method of natural frequencies of coupled horizontal and torsional vibration of hull girder based on design sensitivity analysis in case of the changes of system parameters. The sensitivity analysis is formulated applying the direct differentiation method and transfer matrix method. In the analysis, warping, shear deformation due to torsion and the continuity condition at the connected part of open and closed hull section are considered. Using the presented method. The affection for natural frequencies by the change of system parameters, especially cargo and added mass and their centers, is numerically investigated for a real large container carrier.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.439-439
• /
• 2021

하천에서는 물리적 및 생태적 측면에서 종횡적 연결성이 매우 중요하며 이를 통해 물리적 환경 변화에 따라 변화하는 생물의 종도 연속적으로 변화하여 이어진다. 하천에서 안정적으로 물이 흐르고 거기서 서식하는 어류들의 보호 및 생태계 보전을 위해 어류의 이동이 가능하도록 보 혹은 댐 등과 같은 하천 횡단구조물 설계 시 어도를 추가적으로 설치하고 있다. 어도는 어류의 이동이 차단 혹은 곤란한 경우 이동이 가능하도록 만들어진 수로를 의미한다. 국내에 설치된 보는 35,000개 이상으로 이 중 어도는 5,081개가 설치되어 있다. 우리나라의 하천설계기준의 어도설계기준은 2002년에 개정되었으며 보의 부대시설로 어도의 형식에 대해서 다루어졌다. 그러나 어도의 기능을 평가하고 효율성을 증대시키기 위하여 어도 내의 수리 특성을 정확히 파악하여야 하며 또한 어류거동 및 이동에 대한 특성을 고려하여 적절한 어도의 위치선정 및 설계유량을 선정해야한다. 이를 위해 본 연구에서는 2차원 수리해석모형(Kim et al., 2018)에 Lagrangian기반 어류이동모형을 결합한 수치모형을 개발하고 이를 수리실험결과(Tan et al., 2018)와 비교하여 검증을 수행하였다. 어류의 운동 및 생물학적 특성을 반영하기는 매우 어렵기 때문에 현장조사 및 실험실 테스트로 통하여 획득한 주요 특성만을 반영하였다. 이러한 시도는 최근 기후변화 및 하천의 자연성 회복을 위한 종횡적 연결성을 검토하고 어도기능을 평가할 수 있는 기술로 활용이 가능할 것으로 보인다.

• Proceedings of KOSOMES biannual meeting
• /
• 2004.11a
• /
• pp.137-141
• /
• 2004

Ship structures are basically an assembly of plate elements and the load-carrying capacity or the ultimate strength is one of the most important criteria for safety assessment and economic design. Also, Structural elements making up ship plated structures do not work separately, resulting in high degree of redundancy and complexity, in contrast to those of steel framed structures. To enable the behavior of such structures to be analyzed, simplifications or idealizations must essentially be made considering the accuracy needed and the degree of complexity of the analysis to be used. On this study, to investigate effect of modeling range, the finite element method are used and their results are compared varying the analysis ranges. The model has been selected from bottom panels of large merchant ship structures. For FEA, three types of structural modeling are adopted in terms of the extent of the analysis. The purpose of the present study is to numerically calculate the characteristics of ultimate strength behavior according to the analysis ranges of stiffened panels subject to uniaxial compressive loads.