• Journal of the Korean Ceramic Society
• /
• v.39 no.5
• /
• pp.503-510
• /
• 2002

Silicon carbide candle filters for the pressurized fluidized bed combustion system were fabricated by extrusion process. Carbon black was added to control the porosity. Inorganic additives such as clay and calcium carbonate were added to exhibit appropriate strength. Silicon carbide layer with a finer pore size (mean pore diameter ~$10{\mu}m$) was coated on the silicon carbide support layer (mean pore diameter ~$47{\mu}m$, porosity ∼40%). After that, the filter was sintered at 1400${\circ}C$ in air. We evaluated the filtration performances of the filter at 500${\circ}C$ and $5kgf/cm^2$ of pressure. As a result, high separation efficiency, >99.999% was measured. It is expected that silicon carbide candle filter can be successfully used for the pressurized fluidized bed combustion system.

• Korean Chemical Engineering Research
• /
• v.52 no.2
• /
• pp.233-239
• /
• 2014

The slagging which generated from ash deposition on furnace wall and tube in boiler reduces the heat transfer efficiency and damages to safety of boiler. The slag flow behavior in boiler is affected by melting temperature which is related to ash compositions. In this study, the behavior of slag is researched by using ash fusibility test, called TMA (Thermo-Mechanical Analysis). The technique measures the percentage shrinkage as the function of temperature, T25%, T50%, T75%, T90%. These temperatures indicate different stages of melting. Then, the effect of ash chemical compositions measured from XRF (X-ray Fluorescence Spectrometer) to ash fusion temperatures is discussed. Among the chemical compositions, refractory and fluxing influence on ash fusibility is described. High levels of refractory component and limited amount of fluxing components ($Fe_2O_3$, $K_2O$, CaO) increase overall melting temperatures. High $SiO_2/Al_2O_3$ ratio decrease high melting temperatures (T75%, T90%). Meanwhile, the presence of reasonable levels of fluxing components reduces overall melting temperature. A presence of fluxing component such as $K_2O$ and CaO is found to decrease the T25% values significantly. From this research, it is possible to make a reasonable explanation and prediction of ash fusion characteristic from analysis of TMA results and ash chemical compositions.

• Korean Journal of Biological Psychiatry
• /
• v.24 no.1
• /
• pp.19-25
• /
• 2017

Previous studies have found that firefighters have a tenfold higher prevalence of Parkinson's disease (PD) compare to the general population. Firefighters are constantly exposed to various occupational hazards including toxic chemicals of fire residue and the toxic chemicals can effects development and progression of PD. Nevertheless, there were no studies about the association between exposure to chemical byproducts of combustion and the development of PD among firefighters. Thus the aim of this study is to look into existing researches regarding the effect of chemical byproducts of combustion on the development of PD. An extensive literature search was conducted to identify harmful chemical components of smoke and fire residue, using the PubMed database during November of 2016. We searched for relevant articles by combining several keywords that contained "Parkinson's disease" and each of the different toxic chemicals, yielding a total of 1401 articles. After applying the selection criteria, 12 articles were chosen. Chemical substances reported to have a harmful effect on PD, in at least one article, were carbon monoxide, toluene, manganese and lead. Carbon monoxide and metal substances including manganese and lead were found to be associated with an increased PD risk in more than two articles. There was a heightened risk of PD in firefighters due to exposure of chemical byproducts of combustion including carbon monoxide, toluene, manganese and lead. However, to the best of our knowledge, to support this result we need more systematic epidemiological studies about these risk factors of PD among firefighters. In addition, further studies for the effects of prolonged exposure to toxic fire residue on the development and progression of PD in firefighters are needed.

• Proceedings of the Korean Society of Community Living Science Conference
• /
• 2009.09a
• /
• pp.99-99
• /
• 2009

지명(地名)은 그 지역의 역사와 전설, 문화, 풍속은 물론 독특한 자연환경이나 생활 모습을 담고 있어 농업농촌의 지역적 특성을 나타낸다. 본 연구는 지명유래의 활용성 증진의 한 방편으로 브랜드 및 문화관광상품 개발을 위해 서천군의 자연마을 지명유래, 이미지, 관광자원 등을 조사하였다. 서천군의 자연마을 유래 516건에 대한 자료는 국토지리정보원, 문화원자료집, 서천군홈페이지에서, 산, 강, 골, 고적, 못 등 그 외 지명자료는 한글학회 지명총람에서 2,000건을 수집하였다. 자연마을지명의 유래 516건을 8개 유형으로 구분하면 자연지리 122건, 인문지리 114건, 생태환경 51건, 산업경제 25건, 역사 34건, 유적유물 28건, 민속 37건, 종교 19건이며, 지형(80건), 생물(33건), 고사(19건)관련 유래가 많았다. 서천군 지역브랜드 개발을 위한 요구도 조사는 지역민 154명과 방문객 152명 총 306명을 조사하여 SPSS WIN 12.0 프로그램을 이용 분석하였다. 응답자의 일반적 특성은 여성이 55.6%, 대졸자 54.2%, 연령은 40대(29.1%), 1500만원-3000만원 미만의 연소득자 32.0%가 가장 많았다. 서천군의 형용사적 이미지를 기술통계량으로 살펴보면 지역민은 평화로운, 정감있는, 순수한, 전통적인, 믿을수 있는 순으로, 방문객은 순수한, 평화로운, 정감있는, 따뜻한, 친절한 순으로 평균간이 높게 나타났고, 요인분석에 의한 지역민과 방문객의 인지적 형용사 도출결과는 정열적, 평화적, 보수적인 3가지 요인이다. 또한 서천군의 대표적 상징자원은 지역민의 경우 춘장대해수욕장(32.5%), 희리산 자연휴양림(16.9%), 금강하구둑 철새도래지(16.9%)순이며, 방문객은 춘장대해수욕장(43.4%), 희리산 자연휴양림(23.0%), 한산모시축제(23.0%)순으로 높게 나타났고, 지명 호감도는 지역민의 경우 꽃뫼(29.2%), 솔리(20.8%). 소야(17.5%)순이며, 방문객은 꽃뫼(30.9%), 솔리 (19.7%), 무닛골(16.4%)순으로 높았다. 향후 본 연구에서 제시된 연구를 통하여 서천군의 지명을 활용한 브랜드개성을 측정할 수 있어 마케팅 관점에서 서천군의 브랜드를 도출하는데 기여할 수 있을 것이다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.4
• /
• pp.459-466
• /
• 2012

The accurate engine output is basically one of important factors for the analysis of engine performance. Nowadays in-cylinder pressure analysis in internal combustion engine is also an indispensable tool for engine research and development, environment regulation and maintenance of engine. Here, it is essential more than anything else to find the correct TDC(Top Dead Center) position for the accuracy of engine output for diesel engine. Therefore this study is to analyze affecting factors to TDC position in 2-stroke large low speed engine and to suggest new method for determining correct TDC position. In the previous paper, it was mentioned that the accuracy of engine output is influenced by the determination of exact TDC position, and that 'Angle based sampling' method is better than 'Time based sampling' method in terms of precision. It was confirmed that there is 'Loss of angle', which is a difference between compression pressure peak and real TDC caused by heat loss and blow by of gas leakage. Consequently we invented new method, called "An improved method of time based sampling", which can obtain the correct engine output. The results by this method with compensating loss of angle was shown the same result by the 'Angle based sampling' method in encoder setting cylinder. This study is to suggest the new measuring method of exact engine output, and to examnine the reliance on the outcome.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.5
• /
• pp.361-366
• /
• 2017

As the recent development of computing architecture and application software technology, real world simulation, which is the ultimate destination of computer simulation, is emerging as a practical issue in several research sectors. In this paper, metal plate motion in a square shock tube for small time interval was calculated using a supercomputing-based fluid-structure-combustion multi-physics simulation tool called Illinois Rocstar, developed in a US national R amp; D program at the University of Illinois. Afterwards, the simulation results were compared with those from experiments. The coupled solvers for unsteady compressible fluid dynamics and for structural analysis were based on the finite volume structured grid system and the large deformation linear elastic model, respectively. In addition, a strong correlation between calculation and experiment was shown, probably because of the predictor-corrector time-integration scheme framework. In the future, additional validation studies and code improvements for higher accuracy will be conducted to obtain a reliable open-source software research tool.

• Fire Science and Engineering
• /
• v.33 no.3
• /
• pp.105-111
• /
• 2019

In Korea, the results of a field survey on the construction of flammable exterior materials implemented in 2018 revealed that 147,559 buildings belong to this category. It was found that the fire spreading cases in upper and adjacent constructions are about 3,500 per year, the fires of starting in flammable exterior material are about 1,500 per year. In this study, we investigated the repair method of buildings constructed by flammable exterior material and conducted performance verification of each repair materials for prevention of similar fire. In the case of the repair method, a method of reinforcing with a repair material after removing the existing building finishing material and a method of attaching the repair material after performing the face finishing are proposed. In addition, we conducted cone calorimeter tests of 6 materials such as fireproof gypsum board, mineral wool, hard urethane foam, ceramic board and ALC panel as dryvit and repairing materials, and investigated basic combustion performance of that materials.

• Economic and Environmental Geology
• /
• v.48 no.1
• /
• pp.89-101
• /
• 2015

The sour gas is natural gas containing components such as hydrogen sulphide and carbon dioxide that form acids when mixed with water. Element sulfur precipitates from sour gas when reservoir pressure and temperature decrease. According to the International Energy Agency, about 43% of the world's natural gas reserves(2,580 tcf or 73.057 tcm), excluding North America, are sour. The sour gas is often derived from the Germanic word 'sauer or acidic' and the etymology referred to as 'sour'. Sour gas requires special handling and infrastructure because it contains significant amounts of hydrogen sulphide, making it highly corrosive, flammable and explosive, and there fore more costly and dangerous to process. So the business of sour gas is affected by two important factors: the economic value of the gas, and the methods used in its production. According to be analyzed in the academic literature to sour gas(2000~2014) by the program of 'web of science', the research activities 145 papers in sour gas.

• Applied Chemistry for Engineering
• /
• v.20 no.1
• /
• pp.62-66
• /
• 2009

Utilization and interest of unconventional fuel and process residue such as oil sand and its residue, oil sand coke, have been increased because of the continuous rise of fuel price and conventional fuel availability. In this study, the gasification of oil sand coke produced from coking process of oil sand was performed to utilize as an energy resource using lab-scale fixed bed gasification system. The combustion characteristics of oil sand bitumen and oil sand coke were investigated by using TGA and lab-scale gasification system was applied to reveal the characteristics of produced syngas composition with oxygen/fuel ratio, temperature and steam injection rate. Oil sand coke shows a high carbon content, heating value and sulfur content and low ash content and reactivity. In case of oil sand coke gasification, generally with increasing temperature, the amount of steam introduced and decreasing oxygen injection rate, $H_2$ content in product gas increased while the $CO_2$ content decreased. The calorific value of syngas shows about $2100kcal/Nm^3$ and this result indicates that the oil sand coke can be used as a resource of hydrogen and fuel.

• Journal of the Korean Ceramic Society
• /
• v.41 no.3
• /
• pp.235-242
• /
• 2004

Si, NH$_4$Cl, NaN$_3$, NaCl, $N_2$ were used as raw materials for preparation of $\alpha$-Si$_3$N$_4$ powder. NH$_4$Cl and NaN$_3$ were used as additives, and NaCl was used as a diluent. Initial $N_2$ gas pressure in the SHS reactor was 60 atm. In preparation of $\alpha$-Si$_3$N$_4$, the reactivity and the properties of the products were examined with the various kinds of additives and the content of diluent. At first, the optimum reaction system for the preparation of $\alpha$-Si$_3$N$_4$ is examined and then the optimum composition was examined in the optimum reaction system. The optimum reaction system was Si-$N_2$-additive(NH$_4$Cl+NaN$_3$)-diluent(NaCl) and the optimum composition was 38 wt%Si+50 wt%(NH$_4$Cl+NaN$_3$)+12 wt%NaCl. The maximum fraction of $\alpha$-phase of Si$_3$N$_4$ produced in this condition was 96.5 wt% and the shape of the $\alpha$-Si$_3$N$_4$ produced in this condition was an irregular fiber with a length of 10 ${\mu}{\textrm}{m}$ and a diameter of 1 ${\mu}{\textrm}{m}$.