• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.1
• /
• pp.24-33
• /
• 2005

This paper presents dimming control system for automotive 35[W] metal halide discharge(MHD) lamp electronic ballast using digital control method. HID system has been becoming increasingly popular due to its superior performance(high luminous efficacy, good color rendering and long life etc.)over the conventional halogen system. However, this lamp demands a highly efficient ballast and very complex control circuitry that can control complex transient state in applying to automotive. Therefore, in this paper, digital control method for the HID lamp ballast is presented for optimal control that can adapt complex transient state, steady state and various environments. In developed dimming system, the system is designed to control the lamp output voltage step by step using microcontroller according to cds sensor. Therefore the designed dimming control system give good driving condition to diver and realize the power control effectively. The results of the proposed system is verified through various simulation results and the experiment results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.666-671
• /
• 2016

This paper introduces a device providing close local lighting to the affected part, where the operation-purpose astral lamp alone cannot shed light directly, in an operation room of hospitals or clinics, which helps clinical doctors perform safe treatment of the affected part deep inside a human body. This medical assisting lighting is a device necessary to prevent fatal operation failures, which can occur with minute operation processes, such as tumor removal or angiorrhaphy. The components, such as the light source and power supply were designed to be low power consuming and small in size, have a narrow angle lens was used to increase the light spreading effect and focused illumination. The end-caps of the light transmission device using an optical cable and the lighting device were designed in the waterproof type to enable disinfection of these devices after use for the next patients. According to the measurement of the light source properties made after development of the retractor lighting device, the illumination intensity was 490 lux, the brightness was $11,550cd/m^2$, general color rendering index was 78, color temperature was 11,000K, and the intensity distribution was even, which were confirmed to be adequate for medical assisting local lighting.

• Journal of Broadcast Engineering
• /
• v.15 no.4
• /
• pp.461-473
• /
• 2010

Since eco friendly and power saving products recently got into the limelight for the protection of environment, LED light technology has caught much of attention as the next generation broadcasting lighting. The newly introduced light source has such advantages as higher efficiency, longer life and its slim and compact forms leading to conveniency in installations. When combined with digital light control it gives more dynamic and various features to lighting. In this paper, used CIE standard for measuring light sources by their purposes and forms to make a comparative analysis of spectral distribution and color rendition of LED light source to those of existing lighting systems. By means of the cast shadowing and color reproduction tests I also tried to figure out the effects of LED lighting design on TV visuals where higher quality is crucial with the audience's increasing demands for quality image.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.12
• /
• pp.23-30
• /
• 2009

LEDs are increasingly used for many applications including automotive, aviation, display, transportation and special lighting applications. Generally, the RGB multichip LED luminaire applied to signboard, emotional lighting system and display device and the white LED luminaire applied to general lighting system. white LED spectra for general lighting should be designed for high luminous efficacy as well as good color rendering. This paper describes characteristics of LED luminaire white LED and RGB multichip LED. Two type of LED luminaire prototype used experiment physical, electrical and optic test and performance analyzed. RGB multi-chip and phosphor-type white LED luminaire were analyzed by experiment on their color characteristics and luminous efficacy of radiation, distribution curve, and electrical characteristics. Research work is in progress to develop an improved performance for optic and electrical works well for two type of LED luminaires.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.11
• /
• pp.2078-2082
• /
• 2007

Recently, according to traffic accident statistics, traffic accidents occurring at night are as frequent as those during daytime, but their death rate is 1.5 times higher than that of daytime traffic accidents. This problem originates that the insufficient range of vision security of a driver causes the inappropriate accident confrontation. Therefore, in this paper, a microcontroller-based digital control method for the superior performance in headlight system is presented for optimal control that can adapt complex transient state, steady state and various environments. Specially in vehicles# headlight, its fundamental purpose is to implement the artificial headlight system which automatically controls the lighting patterns most adaptive to driving, road and weather conditions. Therefore we aimed at the development of headlight system, focused on the implementation of an artificial vehicle, of more advanced convenience and safety for drivers.

• Journal of the Korean Chemical Society
• /
• v.61 no.4
• /
• pp.163-167
• /
• 2017

Along with the progress of white LED technology, red phosphors have become increasingly important in industry and academia, and a more specific demand has steadily increased in the market. Red phosphors are used in high efficiency and high rendering LED lightings. However, using red phosphors with $Eu^{2+}$ activators caused color rewarming and reduced emission intensity in white LED chips due to strong reabsorption in the green or yellow wavelength range caused by the 4f-5d transition. $Mn^{4+}$ doped phosphors which have no such drawbacks and which can further improve the color rendering index (CRI) are now of great interest. However, $Mn^{4+}$-doped phosphors have a disadvantage in that the emission wavelength is determined depending on the host due to the $^2E_g{\rightarrow}^4A_2$ transition. In this study, the $SrO-BaO-GeO_2$ solid-solution was selected, and $Sr_{1-x}B_axGe_4O_9:Mn^{4+}{_{0.005}}$ ($0{\leq}x{\leq}1$) phosphors were synthesized and characterized. This led to a versatile color tuning in LED technology.

• Korean Journal of Optics and Photonics
• /
• v.32 no.4
• /
• pp.163-171
• /
• 2021

Conventional white light-emitting diodes (LEDs) for lighting applications consist of blue LEDs and yellow phosphors, the spectrum of which lacks deep red. To improve the color-rendering characteristics of white LEDs, a red quantum-dot film was applied to the diffuser plate of LED lighting. The mean free paths of the quantum dots and the concentration of the TiO₂ particles in the diffuser plate were adjusted to optimize the optical structure of the lighting. The color-rendering index (CRI) was greater than 90 for most conditions, which demonstrates that adoption of the red quantum-dot film is an effective way for improving the color-rendering properties of conventional white LEDs. The angular dispersion of color coordinates could be removed by utilizing the optical cavity formed between the diffuser plate and the reflector on the bottom of the lighting, where multiple passages of the light through the quantum-dot film reduced the differences in optical path length depending on the viewing angle.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.3
• /
• pp.188-199
• /
• 2019

In this study, research trends were investigated by examining important academic research on museum lighting that has been carried out in Korea over the past 30 years. The aim was to highlight important studies conducted in Korea on material deterioration caused by museum lighting and to examine the current status of research on LED light sources to provide direction for future research. The ultimate goal of studies on museum lighting is to improve the long-term conservation effects, and this study examined the latest light sources of each era. Prior to the 1990s, the effects of light sources on relics were assessed by investigating incandescent light bulbs and fluorescent lamps, the first museum exhibition lighting. Then in the 1990s, the introduction of halogen lamps and HID lamps led to the analysis of the characteristics of a light source itself and the introduction of illumination standards. In the 2000s, the lighting environment of museums was investigated based on the characteristics of the light sources that had been studied, and in terms of preservation, research was conducted not only to improve the conservation of relics but also to improve the sentiments of visitors. After 2010, LED lamps were introduced; therefore, material deterioration studies on LED lamps were expanded. During this period, enhancements to LED light sources were made, such as reducing the blue spike area and increasing color rendering. With the development of lighting used in museums and art galleries, the direction of the display preservation criteria has led to the need to prepare advanced standards, covering all aspects from the center of illumination to the consideration of the color of an object and the speed of radiation from the light source. Regular studies of museum lighting in a long-term perspective should be planned to standardize the more advanced conditions of material discoloration.