• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.32-32
• /
• 2004

산업이 발전함에 따라 기계부품의 소형화, 고속화가 요구되는 세계적인 추세에서 정밀 가공기술은 기계 및 전자 부품 산업에서 중요한 위치를 차지하게 되었다. 특히, 원통형상을 가지는 부품의 가공에서 무심 연삭(Centerless Grinding) 공정은 높은 생산성과 정확한 치수 형성의 능력이 있어서 중요한 생산공정으로 발전되어 왔다. 예컨대 각종 Pin, Compressor의 Crankshaft, 소형 축, 연료분사기 등은 무심 연삭 공정을 통하여 높은 정밀도를 얻고 있다. 본 발표에서는 최근 생산 현장에서 요구되고 있는 고효율 연삭 공정을 위한 Shaft류의 외경과 단면의 복합공정 연삭 방법을 기술하였다.(중략)

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.7
• /
• pp.158-168
• /
• 1995

연삭숫돌 선택은 공작물제거량, 숫돌의 소모량, 표면정도 및 공작물의 물리적,화학적 특성을 고려하여 설정하는 것을 기본으로 한다. 연삭가공은 구성인자의 상호관계가 복잡하여 이중에서 어느한 요소만을 고려하여 설정하기 어렵고 정량적 기준 또한 정해져있지 않아 현실적으로는 숙련자의 정성적이고 경험적 지식에 따른 주관적 척도에 의존하는 것이 대부분이다. 또한, 연삭숫돌은 작업조건중에서 대량생산을 제외하고는 되도록이면 현장에 구비되어 있는 작업가능한 연삭숫돌 중에서 선택하는 것이 바람직하다. 따라서 본시스템에서는 이와같은 점을 고려하여 최적 연삭숫돌선택을 퍼지이론에 기초한 현장 숙련자의 지식을 활용하므로써 연삭숫돌선택의 효율성을 도모하는 동시에 현장에 연삭숫돌이 구비되지 않은 경우도 고려하여 연삭숫돌설정에 우선순위를 제시하므로써 작업자에 연삭숫돌선택의 유연성을 부여하였다. 또한, 실용성있는 전문가시스템의 구축을 위해 정성적이고 경험적인 지식의 활용을 위한 지식표현으로 설문조사에서 얻은 테이타를 x$^{2}$-분포에 따른 추정신뢰구간을 구해, 이를 토대로한 비대칭 삼각퍼지함수의 결정법을 제시하고, 이를 이용해서 구축한 시스템의 실행결과의 타당성을 비교하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.837-846
• /
• 1989

Belt tension distribution for an abrasive blet grinding was investigated analytically and experimentally for (1) slack side and (2) tight side blet grinding. Classical Eytelwein equation was used to predict the belt tension distribution with dividing contact angles into (1) inactive and (2) active angles. General friction theory was modified based on the friction force between the belt and the support in the grinding contact area that was obtained by experiments. It was found that analytical results were in good agreement with the experimental results. Also, the tight side belt grinding was recommended since it could carry out more grinding load than that of slack side belt grinding.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.1
• /
• pp.42-51
• /
• 1993

Recently, WC-Co have some excellent properities as the material for the mechanical component such as metallic moulding parts, ball dies parts, and punch parts. This paper describes the surface roughness and grinding force caused by experimental study on the surface grinding of WC-Co with ultra-precision like a mirror shape using diamond wheel. Also, some investigations are carried out using WA grinding wheel to increase improved ground surface roughness such as polishing, lapping effect. Some important results obtained here are summarized as follow. 1) Within this experimental grinding condition, we can be obtained $R_{max}.\;2\mu\textrm{m}\;R_a\;0.3\mu\textrm{m}$ whichare the most favourable ground surface roughness using #140 diamond wheel, and improved surface roughness values about 20 .approx. 25% throughout 5 times sparkout grinding 2) The value of surface roughness is Rmax. $0.49\mu\textrm{m},\;R_a\;0.06\mu\textrm{m}$ using #600 diamond wheel. 3) The area of no rack zone is less than $F_{n}$ 0.27N/mm, Ft 0.009N/mm

• Journal of the KSME
• /
• v.52 no.2
• /
• pp.43-47
• /
• 2012

현재 난삭재 가공에는 연삭가공기술이 널리 쓰이고 있다. 하지만 연삭가공은 냉각액, 절삭유 등의 소모가 많아 환경에 나쁜 영향을 미치고 에너지 소모도 크다. 최근에 LAM(레이저 보조가공) 등의 기술개발이 이루어져 기존보다 더 효율적으로 난삭재를 가공할 수 있게 되었다. 이 글에서는 환경 친화적 난삭재 절삭가공기술 동향에 대해 소개한다.

• Journal of Astronomy and Space Sciences
• /
• v.21 no.2
• /
• pp.141-152
• /
• 2004

Optics fabrication process for precision space optical parts includes bound abrasive grinding, loose abrasive lapping and polishing. The traditional bound abrasive grinding with bronze bond cupped diamond wheel leaves the machine marks of about $20{mu}m$ rms in height and the subsurface damage of about 1 ${mu}m$ rms in height to be removed by subsequent loose abrasive lapping. We explored an efficient quantitative control of precision CNC grinding. The machining parameters such as grain size, work-piece rotation speed and feed rate were altered while grinding the work-piece surfaces of 20-100 mm in diameter. The input grinding variables and the resulting surface quality data were used to build grinding prediction models using empirical and multi-variable regression analysis. The effectiveness of such grinding prediction models was then examined by running a series of precision CNC grinding operation with a set of controlled input variables and predicted output surface quality indicators. The experiment achieved the predictability down to ${pm}20$ nm in height and the surface roughness down to 36 nm in height. This study contributed to improvement of the process efficiency reaching directly the polishing and figuring process without the need for the loose abrasive lapping stage.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.2
• /
• pp.19-24
• /
• 2015

Gears are produced through a variety of methods. In general, a metal piece is formed into the general shape of a gear through rough cuts. The gear then moves on to a more precise machine that removes more material. Grinders work via abrasion, rubbing a rough surface against a work piece at such high speeds that it literally scrapes unwanted material away from the item. Since the grinder is spinning so fast, the material is removed very quickly. This allows a grinder to remove a very small amount without taking any unwanted material with it. This study investigates the effect of grinding process parameters like grinding spindle speed and table transfer speed on the gear grade and grinding efficiency.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.1
• /
• pp.13-20
• /
• 2005

Bound abrasive grinding is used for the initial fabrication phase of the precision aspheric mirrors for both space and ground based astronomical telescopes. We developed a new grinding optimization process that determines the input grinding variables for the target surface roughness, checks the grinding error magnitude in resulting surface roughnesses, and minimizes the required machining time. Using the machining data collected from the previous grinding runs and subsequently fed into the multivariable regression engine, the process has the evolving controllability that suggests the optimum set of grinding variables for each target surface roughness. The process model was then used for ten grinding experiments that resulted in the grinding accuracy of $=-0.906{\pm}3.38(\sigma)\;nm(Ra)$ for the target surface roughnesses of Zerodur substrate ranging from 96.1 nm (Ra) to 65.0 nm (Ra) The results imply that the quantitative process optimization technique developed in this study minimizes the machining time and offers the nanometric surface roughness controllability superior to the traditional, qualitative, craftsman based grinding process for the astronomical optical surfaces.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.10a
• /
• pp.87-90
• /
• 2001

감속의 가장 일반적인 형태는 기어 감속일 것이다. 백래쉬를 허용할 경우 전달효율이 98%까지 얻을 수 있지만 백래쉬를 중일수록 효율은 줄어들고 기어가공의 오차가 출력으로 나타나게 되어 정밀 감속기로 쓰기 위해서는 연삭등을 해야만 하게 된다. 본 논고에서는 최근 개발된 여러 종류의 감속기의 구동원리와 그들의 장단점을 들고 로보트에의 응용성을 고찰 해보고자 한다.

• Journal of the Korean Society for information Management
• /
• v.10 no.1
• /
• pp.53-63
• /
• 1993

The conventional fuzzy set model has been criticized as a retrieval model because the MIN and MAX operators have the properties adverse to effective calculation of document values. Since the first introduction of fuzzy set theory a variety of fuzzy operators have been developed, which can replace the MIN and MAX operators. We analyze their behavioral aspects of generating document values, and propose the enhanced fuzzy set model based on a class of fuzzy operators called positively compensatory operators. We also show through performance experiments that the proposed fuzzy set model provides higher retrieval effectiveness.