• Explosives and Blasting
• /
• v.19 no.3
• /
• pp.105-113
• /
• 2001

채석, 굴착, 가공과 같은 워터젯 응용분야에서 대상재료에 깊은 홈(kerf)을 절단할 수 있는 실험실용 회전식 슬로터(slotter)를 제작하여 암석을 대상으로 워터젯 시스템의 절단효율을 시험하였다. 고압펌프는 유율 7.5 l/min, 압력 379 MPa, 용량 75 kW급의 JETPAC을 주로 사용하였고, 암석시료는 화강석인 제천석, 거창석을 사용하였다. 시험과정에서는 물과 연마재 투입에 의한 절단 및 진동식 슬로터에 의한 슬롯절단 기초시험을 먼저 수행하고, 그 결과를 토대로 회전식 슬로터에 의한 절단시험을 실시하였다. 순수한 물에 의한 시험의 결과 고압수류의 토출압력은 절단심도에 정비례하였고, 노즐의 이송속도는 이차함수 형태의 반비례 관계를 보였다. 연마재 투입시험에서는 순수한 물에 의한 경우에 비해 연마재로 인한 충격력의 증가로 절단심도가 크게 증가하였는데, 유사한 조건하에서 3~5배 이상의 절단심도의 증가를 보였다. 진동식 슬로터에 의한 슬롯절삭에서는 생성된 슬롯의 내벽면이 바닥으로 갈수록 좁아짐으로써 넓은 폭의 슬롯형성은 가능하나 절삭심도가 제한되었다. 회전식 슬로터에 의한 시험에서 생성된 슬롯들은 평균 22 mm의 폭으로 내벽면이 바닥까지 서로 평행하여 깊은 심도까지 비트진입이 가능하였다. 절단율은 16~32 mm/sec의 속도범위에서 $40~160{\;}\textrm{mm}^2/sec$로 나타났다. 한편, 최대유율 24 l/min의 HUSKY S-200 펌프에 의한 시험결과 JETPAC 펌프에 비해 1.13~3.47 배의 절단심도를 보였다

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9A
• /
• pp.754-762
• /
• 2003

The coupled and propagated property of the composite side-polished fiber and infinite planar waveguide with conductor cladding (PWGCC) is presented by using the 3-D finite difference beam propagating method (FD-BPM) in according to the variety of refractive indexes between the fiber and the infinite planar waveguide. It is also introduced for the technique to be applied at and consisted of the analysis domain of 3-D FD-BPM for the coupling between the side-polished fiber and PWG. It is also compared the properties of coupling between the side-polished fiber and PWGCC with them of the general symmetric and asymmetric PWG without perfect conductor (PEC), which has been investigated by many researcher.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1387-1392
• /
• 2019

Aspherical mirrors have lighter weight and better performance than spherical mirrors, but it is difficult to process their shape and measure the processing precision. Especially, large aperture aspherical mirrors mounted on satellites need high processing precision and long processing time. The computerized numerically controlled machine of gantry type has been used in polishing process, but it has difficulties in processing the complex shapes due to the lack of degrees of freedom. In order to overcome this problem we developed a polishing system using an articulated industrial robot. The system consists of tool path generating program, real-time robot monitoring, and control program. We show the performance of the developed system through the computer simulation and actual robot operation.

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.312-322
• /
• 2006

The objectives of this study were to evaluate the effect of surface roughness on the surface color and translucency of the composite resins. Two composite resins (Esthet-X, Dentsply, Milford, USA and Charisma, Kulzer, Domagen, Germany) were used to investigate the surface color. Charisma was used to investigate the translucency. 40 disc samples (diameter: 8 mm, thickness: 5 mm) were made by each product to measure the surface color. Polymerized each sample's one side was treated by Sof-Lex finishing and polishing system (Group C, M, F, SF). 40 disc samples (diameter: 6 mm, thickness: 1 mm) were prepared to measure the opacity. 1 mm samples were ground one side with #600, #1000, #1500 and #2000 sandpapers. CIE $L^{*}a^{*}b^{*}$ values of each 5 mm thickness samples, and XYZ values of 1 mm thickness samples on the white and black background were measured with spectrophotometer (Spectrolino, GretagMacbeth, Regensdorf, Switzerland). Mean surface roughness (Ra) of all samples before and after surface treatment was measured using the Surface Roughness Tester SJ-301 (Mytutoyo, Tokyo, Japan). Regardless of type and shade of the composite resin, $L^{*}$ values measured in group C were higher than others (p < 0.05), and $L^{*}$ value decreased as the Ra value decreased except B3 shade of Esthet-X. But there were no significant difference in $a^{*}$ values among groups. In control group and SF, highest $b^{*}$ values were measured (p < 0.05), except B1 shade of Esthet-X. Contrast ratio decreased as the Ra value decreased (p < 0.05). With the above results, difference of surface roughness has influence on surface color and translucency of dental composite resins.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.974-976
• /
• 2011

수석을 가공하기 위해서 회전 통 안에 피연마물을 투입하고 이를 회전 시키면 피연마물 자체의 마찰과 동체와의 마찰로 연마가 된다. 본 연구는 복수의 석재가 회전드럼에 투입되고 회전드럼이 회전을 하면 회전드럼 내측 벽에 개별적으로 고정되어있는 폐비닐로 이루어져있는 패드가 복수의 석재를 회전드럼이 회전하는 방향으로 견인하여 회전드럼에 투입된 복수의 석재가 서로 충돌하여 석재의 거친 면이나 날카로운 모서리가 부드럽게 연마될 수 있도록 하고, 폐비닐로 이루어져있는 패드는 석재에 발생되는 충격을 흡수하고 기존의 패드보다 강도를 크게 향상시키고 훼손된 패드만 교체할 수 있도록 고안하였다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.318-323
• /
• 2003

In order to polish complicated shaped inner surfaces of molds, a new polishing method with consolation liquid was Invented The MAGIC (MAGnetic Intelligent Compound) Polishing is the best method, a countermeasure of polishing trouble that is reduce of productivity and instability of quality. But because MAGIC polishing is new polishing method there is no study of the standardization of polishing by MAGIC wheel yet. So we want to standadize MAGIC polishing condition. For the First time, we will evaluate the influence of composition ratio and kind of polishing grain in polishing surface roughness. In this study, we determined amount of dressing oil and dressing point as kind and composition ratio of polishing grain. we compared surface roughness case by case

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.286-286
• /
• 2004

초고속 정보통신망 구현에 필수적인 광학 연결용 부품인 광 Ferrule은 광섬유 커넥터의 중요부품으로서 우수한 치수정밀도와 내마모성을 갖추어야 한다. 현재, Ferrule로 사용되는 재료는 지르코니아, 알루미나 등 세라믹 물질이 많이 사용되고 있으며 기계적 강도나 내마모성 면에서는 우수하지만, 피연마속도가 석영섬유에 비해 현저히 작아서 특수한 연마방법을 채택해야 하며 성형성이나 가공성이 나빠 생산효율이 낮고 비용이 비싸다는 단점을 가지고 있다.(중략)

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.319-323
• /
• 2002

Recently, new polishing system which was made by magnetic intelligent compound (MAGIC) was invented and, the study is going on for practical use the analysis of factors, that is, the kind of polishing grain, composition ratio of wheel elements, machining frequency, polishing pressure, which the main influence for polishing efficiency are the first step. In this study, analyzed influence of wheel raw material composition ratio on surface roughness.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.2
• /
• pp.14-20
• /
• 2005

This paper describes a dwell time calculation algorithm for polishing tool path generation in the small toot polishing process of the axis-symmetrical lens. Generally dwell time control in the polishing machines means that small polishing tool stays for a dwell time at the specific surface position to get the expected polishing depth. Polishing depth distribution on an aspherical lens surface consists of the superposition of the local polishing depth at the each dwell position. Therefore, tool path generation needs each dwell time together with tool positioning data during the polishing tool movements on the aspherical lens surface. The linear algebraic equation of removal depth removal matrix and dwell time is formulated. Parametric effects such as the dwell d interval are simulated to validate the dwell time calculation algorithm.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.7
• /
• pp.65-71
• /
• 2001

The development process of the polishing system for the aspherical lens mold for opto-electronics industry is described. The system uses the method that polishing tool is scanned on the surface under PC-NC control for the aspherical lens mold. The two axes interpolation of the minimum translation mechanism is applied to give uniform working condition by motion analysis. An aspherical surface is divided into multiple sections and each dwell time is calculated from the polishing rate model based on the Preston equation. As result of form error compensation experiment, initial form error is decreased about 25% while an average value of surface roughness is also reduced successfully from 180nm to 19nm.