• Journal of Bio-Environment Control
• /
• v.29 no.3
• /
• pp.265-276
• /
• 2020

This study was conducted to provide a basis for raising farm income by increasing the yield and extending the cultivation period by creating an environment where crops can be cultivated normally during high temperatures in summer. The maximum cooling load of the multi-span greenhouse with a floor area of 504 ㎡ was found to be 462,609 W, and keeping the greenhouse under 32℃ without shading the greenhouse at a high temperature, it was necessary to fog spray 471.6 L of water per hour. The automatic fog cooling control device was developed to effectively control the fog device, the flow fan, and the light blocking device constituting the fog cooling system. The fog cooling system showed that the temperature of the greenhouse could be lowered by 6℃ than the outside temperature. The relative humidity of the fog-cooled greenhouse was 40-80% during the day, about 20% higher than that of the control greenhouse, and this increase in relative humidity contributed to the growth of cucumbers. The relative humidity of the fog cooling greenhouse during the day was 40-80%, which was about 20% higher than that of the control greenhouse, and this increase in relative humidity contributed to the growth of cucumbers. The yield of cucumbers in the fog-cooled greenhouse was 1.8 times higher in the single-span greenhouse and two times higher in the multi-span greenhouse compared to the control greenhouse.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.2
• /
• pp.61-68
• /
• 2010

The collapsing accidents of pipe greenhouses in the farmhouse have been increased duo to heavy snow load. However, the study on exact structure analysis to prevent the collapse of pipe greenhouses is rare and the damage of the farmhouse is annually repeated. The method of existing structure analysis is basically made of linear elastic analysis based on the micro displacement. But the actual stiffness of the pipe greenhouse is significantly weaker than the stiffness of buildings and the load acting on the greenhouses gets to become relatively bigger. It means that the geometry shape of greenhouses changes so that the relation of strain-displacement gets to indicate a nonlinear behavior. Therefore, this study is performed to evaluate the structural safety so as to prevent the collapse of pipe greenhouses, which are the single-span greenhouse(farmhouse guidance shape, G) and multi-span greenhouse(farmhouse supply shape, 1-2W), by performing the large-displacement analysis considering nonlinear effects.

• Journal of Wetlands Research
• /
• v.18 no.4
• /
• pp.386-393
• /
• 2016

Agricultural ecosystem is recognized as a space for providing a variety of services, in addition to the food production that it originally encompassed, such as water purification, biological habitat, air purification, soil conservation, and landscape development. The construction of greenhouses in agricultural landscapes can cause deterioration of ecosystem services because of the increase of impermeable area and loss of biological habitats. This study aimed to compare insect diversity between different types of constructed greenhouses and paddy ecosystems. The target study area was selected by considering the distribution status of horticultural complexes and was classified as Single Vinyl Greenhouse, Multi Vinyl Greenhouse or Glass Greenhouse and they were compared with four paddies. The study locations were in Gu-Mi, Bu-Yeo, Ginje and Jin-Ju. A total of 2,333 individual insects belonging to 9 orders, 38 families, 76 genus, and 80 species were collected. The composition of orders was Hemiptera (22.37%), Coleoptera (18.42%), Hymenoptera (14.47%), Orthoptera (11.84%), and Diptera (10.53%). The average number of collected species were in the order Paddy (39.38 species) > Single Vinyl Greenhouse (35.50 species) > Multi Vinyl Greenhouse (22.50 species) > Glass Greenhouse (24.00 species). The Diversity Index (H') was Paddy (4.76) > Single Vinyl Greenhouse (4.57) > Multi Vinyl Greenhouse (4.12), and Glass Greenhouse (4.12). The Richness Index (RI) was Paddy (7.72) and Single Vinyl Greenhouse (7.03) > Multi Vinyl Greenhouse (4.99) and Glass Greenhouse (5.32). From our results, it can be seen that the biological diversity features of insects decreased when greenhouses are constructed.However, Single Vinyl Greenhouse is noted to promote insect diversity more than that by Multi Vinyl Greenhouse and Glass Greenhouse. Hence, when constructing greenhouses, it is necessary to consider insect habitat to conserve insect diversity.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.277-284
• /
• 2018

For the main variables to be selected by the designer for the heating and cooling load calculation in greenhouses, in order to evaluate the effect of these design values on the heating and cooling load, the simulations were carried out by varying the respective design values. Based on these results, we proposed the design values which should pay special attention to selection. The design values which have the greatest effect on the heating load were the overall heat transfer coefficient of the covering material and the design outdoor temperature was next. The effect of the design values according to the number of spans showed little difference. In the case of the single-span greenhouse, the effect of the design values related to the underground heat transfer can not be ignored. However, in the case of the multi-span greenhouse, the effect of the design values related to the underground heat transfer and the infiltration rate were insignificant. The design values which have the greatest effect on the cooling load were the solar radiation into the greenhouse and the evapotranspiration coefficient, followed by the indoor and outdoor temperature difference and the ventilation rate. The effect of the design values showed a great difference between the single-span greenhouse and the multi-span greenhouse, but there was almost no difference according to the number of spans. The effect of the overall heat transfer coefficient of the covering material was negligible in both the single-span greenhouse and the multi-span greenhouse. However, the effect of the indoor and outdoor temperature difference and the ventilation rate on the cooling load was not negligible. Especially, it is considered that the effect is larger in multi-span greenhouse.

• Journal of Biosystems Engineering
• /
• v.18 no.1
• /
• pp.60-70
• /
• 1993

In this study, the environment variations and distributions in different types of greenhouses were measured and analyzed. The elements of environment analyzed were temperature, relative humidity, illumination, carbon dioxide and wind velocity. The analyzed greenhouse types were auto-multi type which has an automatic environment control system and multiple continuous arches, regular-multi type which has an temperature control system and multiple continuous arches, and single arch type which has no environment control system without manual temperature keeping method. The results of this study can be used for the greenhouse building and managements.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1998.05a
• /
• pp.27-32
• /
• 1998

국내에 보급되어 있는 유리온실은 네덜란드에서 수입된 벤로형(Venlo type or Dutchlite)과 벤로형에 비해서 동고가 높으며 온실 한 동의 폭이 상대적으로 큰 광폭형(widespan type)이 대부분을 차지하고 있다. 벤로형 은실의 측고는 3.5~4.0m로서 다소 차이가 있으나, 한 동의 폭과 지붕경사면의 길이가 일정하기 때문에 온실의 지붕경사각은 대부분 22$^{\circ}$를 나타낸다. (중략)

• Journal of Biosystems Engineering
• /
• v.23 no.5
• /
• pp.439-444
• /
• 1998

Effects of the number of spans, orientation and latitude on the transmissivities of direct and diffuse solar radiation in multispan glasshouse were analyzed using a computer simulation model (Kim and Lee, 1997). The number of spans did not affect the transmissivity of diffuse solar radiation, ranging 60∼61%. The transmissivities of direct solar radiation were 55∼64% for E-W orientation and 47∼70% for N-S orientation in ten multispan glasshouse. There was no effect of the latitude on the transmissivity of direct solar radiation in domestic regions. Differences in the transmissivity of direct solar radiation between single-span and multispan glasshouse were significant for E-W orientation during winter season; however, those were relatively small for N-S orientation throughout the year. Transmissivity of direct solar radiation decreased with the increasing number of spans for E-W glasshouse, whereas those for N-S glasshouse was hardly affected by the number of spans.

• Journal of Bio-Environment Control
• /
• v.7 no.4
• /
• pp.290-297
• /
• 1998

In this study an optimization of greenhouse roof shape was performed to maximize solar light transmission which is one of the most important elements in greenhouse environment. To determine roof shape that maximize the total light transmissivity, a computer model for analysing light transmissivity was composed and the Genetic Algorithms was applied for solving optimization problems. By setting composite model as objective function(fitness function), the optimum combination of design variables(roof inclination angle, width ratio) was searched using Genetic Algorithms. The optimum combination of input variables for the maximum light transmissivity at Suwon in winter was found 40 degree root angle , 0.5 width ratio, for two span greenhouses and 37 $_。 / roof angle, 0.7 width ratio, for single span greenhouses.es.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.07a
• /
• pp.123-124
• /
• 2016

본 논문에서는 사물인터넷 기법을 원격지에서 재배환경을 제어할 수 있는 온실 원격제어시스템을 제안한다. 온실원격제어시스템은 온실내의 환경정보를 계측하여 서버에 저장하고, 이 정보를 이용하여 사용자가 제어함으로서 최적의 재배환경으로 조절하고, 저장된 재배 환경정보를 활용하여 작물의 최적의 재배를 위한 기초 자료로 활용하도록 한다. 온실 원격 제어시스템을 웹과 연동하여 각종 기기를 이용하여 원격으로 제어함으로서 각 사용자들이 온실에 접근하지 않고 원격으로 환경을 제어할 수 있도록 구성하였다. 온실 원격제어시스템은 제어부, 통신부 그리고 계측부로 구성하였으며, 무선인터넷을 통하여 5초마다 제어신호를 확인하여 처리하고, 온도를 측정하여 서버에 저장하여 동작을 확인하였다. 따라서 본 논문에서 제안하는 온실 원격제어시스템은 최적의 생장환경을 지속적으로 제공하여 농가의 생산 효율성을 증대 시킬 수 있으리라 사료된다.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1996.10a
• /
• pp.85-88
• /
• 1996

19991년부터 정부의 시설현대화지원 사업이 적극적으로 추진되면서 국내에 보급되고 있는 철골온실은 유리로 피복된 벤로형과 와이드스팬형이 주종을 이루고 있으며, 설치면적은 1995년말 현재 138㏊이고 2004년에는 1,150㏊까지 보급할 계획이다. 국내의 철골온실은 단기간에 양적ㆍ질적으로 급격한 발전을 해 왔지만, 국내의 온실산업을 건전하게 육성하고 선진국수준의 기술개발을 위해서는 정부지원사업의 수행과정에서 발생하고 있는 기술외적인 문제와 함께 한국형 온실모델의 개발을 포함하여 온실전용 국산자재 및 시공기술의 개발과 질적 향상, 건축비의 절감, 환경조절효율의 향상, 소요에너지의 절감, 주년재배를 위한 고온기의 재배환경 유지, 연동수의 제한, 벤로형 온실의 측창설치 및 만족스러운 A/S제공 등 기술개발과 관련된 과제들이 산적해있는 실정이다. (중략)