• Applied Chemistry for Engineering
• /
• v.3 no.2
• /
• pp.280-287
• /
• 1992

Aromatic liquid crystalline polyesters were synthesized from terephthalic acid(TPA), biphenyl dicarboxylic acid(BPA) and hydroquinone(HQ) by solution polymerization. Effects of TPA/BPA ratio(by mole %) on the thermal properties, thermal stability and textures of mesophases were investigated with DSC, TGA, cross-polarized microscopy and X-ray diffractometer. The synthesized polymers in this study were thermotropic and showed nematic textures. Melting temperature($T_m$) and isotropization temperature($T_i$) of polymer increased and thermal stabilities of polymer were improved with the content of BPA. Most of the polymers in this study had crystallinity more than 30%.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.532-538
• /
• 2012

Failure mechanisms for a highly filled elastomer were discussed, and the stip-yield and the inherent flaw models were applied to them. Then, failure assessment diagram methods were investigated by means of modified two models. Fracture toughness tests using CCT(center-cracked tension) specimens made of a highly filled elastomer were conducted to generate the failure assessment diagrams. The failure assessment diagram of the inherent flaw model was normalized in order to compare with that of the modified strip-yield model. From the comparison of two failure assessment diagrams, it was found that the failure assessment diagram of the modified inherent flaw model more conservatively assesses the failure than that of the modified strip-yield model.

• Asian Journal of Turfgrass Science
• /
• v.25 no.1
• /
• pp.59-68
• /
• 2011

Research was initiated to investigate the effect of high water-absorbing polymer on turf grass quality of three major turfgrasses. A total of 12 treatment combinations were used in the study. Treatments were made with different rates of sand, soil organic amendment (SOA), and water-swelling polymer (WSP). Visual turf grass quality was evaluated in creeping bentgrass (Agrostis palustris Huds., CB), Kentucky bluegrass (Poa pratensis L., KB), and zoysiagrass (Zoysia japonica Steud., Zoy) grown under greenhouse conditions. Significant differences were observed among the treatments in CB, KB, and Zoy. Visual quality ratings varied with mixing rates of SOA and WSP, being maximum 5.6 in differences among them. At the end of study it ranged from 0.3 to 9.6 in CB, 0.3 to 4.0 in KB, and 0.9 to 5.8 in Zoy. Turfgrass quality pattern changed with time after seeding among treatments influenced by WSP rates. From this study, a proper rate of WSP is considered to be 5%, 5~10%, and 5% for CB, KB and Zoy, respectively. In general, overall treatment effect of WSP on turfgrass quality was highly associated with SOA 20% in three turtgrass species. When mixing sand with SOA and WSP for rootzone soil, a proper rate of SOA is considered to be 15 to 20% for CB and KB, while 20% for Zoy of warm-season grass. A further study would be required to investigate the effect of varied, gradual mixing rates of WSP on growth characteristics of turfgrasses grown on mixtures of sand, SOA, and WSP before a field application.

• Journal of the Korean Chemical Society
• /
• v.38 no.6
• /
• pp.427-434
• /
• 1994

The retention behaviors of poly(ethylene-co-vinyl acetate)s have been studied by thermal field-flow fractionation(ThFFF) with respect to effective separation and characterization of thermal diffusion coefficients($D_{\tau}$) as one of the physicochemical properties of polymers. The eight copolymers are different in vinyl acetate composition ranging from 25% to 70% and in molecular weight ranging from 110,000 to 285,000. The carrier solvents are THF, toluene and chlorobenzene which have different viscosities and thermal conductivities. It is shown that the retention of a copolymer is dependent on the type of the carrier, the molecular weight and chemical composition of the copolymer. The results show that the retention of a copolymer increases when either vinyl acetate composition or the molecular weight increase. $D_{\tau}$ values measured by experiments vary from 1.36∼5.97 $\cm^2/(s.K)$ depending on the copolymer composition and the type of the carrier solvent. These values increase $(r^2{\geq}0.928)$ with increase of weight % of vinyl acetate. THF is found to be the proper carrier solvent for separation of copolymers employed in this study due to the fact that a $D_{\tau}$ value greatly changes with variation of copolymer composition. From the above results, ThFFF can be used for separation of copolymers with similar molecular sizes but different compositions.

• Journal of the Korean Chemical Society
• /
• v.36 no.1
• /
• pp.87-94
• /
• 1992

The elution behavior of polystyrenes(PS), polymethylmethacrylates (PMMA), polybutadienes(PB), PS-PMMA(SM) block copolymers and PS-PB star shaped copolymers on the cross-linked polystyrene gels was studied. An interpretation was proposed for the plots of log hydrodynamic volume versus retention volume of solutes in the mobile phases such as tetrahydrofuran, toluene, chloroform, methylene chloride and tetrahydrofuran-cyclohexane mixture. In order to predict the retention of solutes from their physical properties, multiple stepwise regression analysis was applied to obtain the correlation. The distribution coefficients($K_p$) of solute-gel interactions in GPC for homopolymers and PS copolymers were also obtained in terms of network-limited separation mechanism. In the cases of PS and PB, $K_p$ values approach unity, while $K_p$ values for PMMA decrease as MW increase in the good solvent, but in poor solvent, $K_p$ values increase as MW increase. $K_p$ values of PS copolymers are dependent on their MW and composition, therefore, morohology of SM block copolymer is predicted to be random phase. A single universal plot of log[η]M vs. $(V_r-V_o)/K_p$

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.9
• /
• pp.989-996
• /
• 2007

In this study, abiotic transformation of 1-naphthol(1-NP) via oxidative-coupling reaction and its reaction products were investigated in the presence of Mn oxides. The reaction products were characterized for their relative polarity using solvent extraction experiment and reverse-phase HPLC, and for structure using CCMS and LC/MS, and for absorption characteristics using UV-Vis spectrometry. The reaction products present in aqueous phase were more polar than parent naphthol and comprised of 1,4-naphthoquinon(1,4-NPQ) and oligomers such as dimers and trimers. Hydrophilic component present in water phase after solvent$(CH_2Cl_2)$ extractions was identified as naphthol polymerized products having molecular weight(m/z) ranging from 400 to 2,000, and showed similar UV-Vis. absorption characteristics to that of foil fulvic acid. Transformation of 1,4-NPQ, which is non-reactive to Mn oxide, to the polymerized products via cross-coupling reaction in the presence of 1-NP was also verified. In this experimental conditions(20.5 mg/L, 1-NP, 2.5 g/L $MnO_2$, pH 5), the transformation of 1-NP into the oligomers and polymerized products were about 83% of initial 1-NP concentrations, and more than 30% of the reaction products was estimated to be water insoluble fractions, not extracted by $H_2O$ methanol. Results from this study suggest that Mn oxide-mediated treatment of naphthol contaminated soils can achieve risk reduction through the formation of oligomers md polymer precipitation.

• Journal of Yeungnam Medical Science
• /
• v.12 no.2
• /
• pp.269-281
• /
• 1995

The effect of persistant mild hyperglycemic hyperinsulinemia on the development of the insulin resistance in rats was studied in vivo. Also, the characteristics of the insulin resistance compared with the insulin resistance of STZ diabetic rats. Persistant mild hyperglycemic hyperinsulinemic rat model was produced by ingestion of glucose polymer for 8 days. The glucose disappearance and infusion rate was measured by hyperinsulinemic euglycemic clamp technique at steady state of blood glucose and insulin levels. The clamped level of blood glucose was 100 mg/dl, and the clamped levels of insulin were $70{\mu}U/ml$ (physiologic condition) and $3000{\mu}U/ml$ (supramaximal condition). Hepatic glucose producticon rate was calculated using measured data. And the glycogen synthetic capacity of skeletal muscle(soleus) and liver was measured after 2 hours of hyperinsulinemic euglycemic clamp study. The glucose disappearance and glucose infusion rate in glucose polymer group was decreased in the both physiological and supramaximal insulin level compared to the rate of the normal control group. The rate of STZ diabetic group wase lowest at supramaximal insulin level among two another experimental groups. The hepatic glucose production rate of glucose polymer group was decreased compared to normal control but increased in STZ diabetic group. The glycogen synthetic capacity of skeletal muscle and liver of glucose polymer group was not significantly different from normal control group, but it was markdly decreased in STZ diabetic group. These results suggest that persistant mild hyperglycemic hyperinsulinemia may induce insulin resistance, but glycogen synthetic capacity is intact.

• Journal of the Korean Chemical Society
• /
• v.26 no.5
• /
• pp.304-309
• /
• 1982

The fluorescence yields of chl-a and-b complexes bound to silicon dimer, tetramer and hexamer containing pyridine group in diethyl ether solvent, were shown the transition of excited energy through silicon polymer chain, and the maximum energy quenching were appeared at 1 : 1 ratio of chl-a and pyridine group in silicon polymer but the chl-b complexes were shown the maximum energy of fluorescene emission at the same ratio.

• The Journal of Korean Society for Radiation Therapy
• /
• v.19 no.1
• /
• pp.7-17
• /
• 2007

Purpose: As increasing complexity of modern radiotherapy technique, more developing dosimetry is required. Polymer gel dosimeters offer a wide range of potential applications with high resolution and assured quality in the thee-dimensional verification of complex dose distribution such as intensity-modulated radiotherapy (IMRT). The purpose of this study is to find the most sensitive and suitable gel as a dosimeter by varying its composition ratio and its condition such as temperature during manufacturing. Materials and Methods: Each polymer gel with various ratio of composition was irradiated with the same amount of photon beam accordingly. Various polymer gels were analyzed and compared using a dedicated software written in visual C++ which converts TE images to R2 map images. Their sensitivities to the photon beam depending on their composition ratio were investigated. Results: There is no dependence on beam energy nor dose rate, and calibration curve is linear. Conclusion: The polymer gel dosimeter developed by using anti-oxidant in this study proved to be suitable for dosimetry.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.575-580
• /
• 2014

The liquid crystalline copolymers were synthesized through direct polycondensation using 4-[4-(4-hydroxyphenoxy)butoxy]benzoic acid (HBBA) and p-hydroxy benzoic acid (HBA) as monomers. The structure and properties for synthesized copolymers were investigated by $^1H$-NMR, FT-IR, differential scanning calorimetry (DSC), thermogravimetry analysis (TGA) and polarizing optical microscope (POM). As result of investigations, inherent viscosities (${\eta}_{inh}$) of polymers were measured as 0.77~1.60 dL/g in phenol/p-chlorophenol/1,1,2,2-tetrachloroethane (25/40/35=w/w/w). Except for P-80, the ranges of the transition and mesophase temperature of copolymers were increased with increasing the amount of HBA. These properties of polymers were presumably due to increasing of the irregularity and rigidity of polymer chains.