• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.3
• /
• pp.233-240
• /
• 1999

Understanding of the relationships between seeding rate and planting date is important for production of spring oats during the fall season. Therefore, this experiment was conducted to investigate seeding rate and planting date effects on forage performance and quality of spring oats(Avena sativa L.) at Suweon in 1997. The experiment was arranged in a split plot design with three replications. The main plots consisted of different seeding rates such as 150, 200, and 250kg/ha. The subplots consisted of different planting dates of spring oats such as 15, 22, and 29 August and 5 September. Dry matter content of oats was significantly decreased(P<0.01) as the planting date was delayed except the planting date of 5 September(24.8%). Dry matter content of forage oats planted on 15, 22, and 29 August was 23.0, 21.5, and 20.5%, respectively. A seeding $rate\;{\times}\;planting$ date interaction for dry matter content was highly significant(P<0.01). Crude protein content of oats was significantly increased(P<0.01) from 15.6 to 27.9% as the planting was delayed, while a significant seeding $rate\;{\times}\;planting$ date interaction for crude protein content of oats was observed. Acid detergent fiber(ADF) and neutral detergent fiber(NDF) contents of oats increased with early planting(P<0.01), but there was no significant difference among the seeding rates. ln vitro dry matter digestibility(IVDMD) of oats was significantly increased(P<0.01) as the seeding rate was increased together with late planting. Average dry matter yield of oats decreased(P<0.01) from 2,647 to 615kg/ha as the planting was delayed, but there was no significant difference among the seeding rates. A seeding $rate\;{\times}\;planting$ date interaction was observed for average dry matter yield of oats that the seeding rate increase in this experiment showed better at early planting dates. Crude protein yield of oats increased from 171 to 410kg/ha as the planting was delayed, and a significant increases(P<0.01) for crude protein yield was found among the seeding rates. ln vitro digestible dry matter(IVDDM) yield of oats decreased(P<0.01) as the planting was delayed, but there was no significant difference among the seeding rates. A significant seeding $rate\;{\times}\;planting$ date interaction for lVDDM of oats was found. The results of this study indicate that both the seeding rate of 200kg/ha and early planting before 29 August would be recommendable for forage yield and quality of oats in Korea.

• Food Science of Animal Resources
• /
• v.24 no.4
• /
• pp.329-334
• /
• 2004

The objective of this study was to determine the effect of herb and bio ceramic complex supplementation on growth performance and meat quality characteristics in finishing pigs. Seventy-two crossbred (Landrace ${\times}$ Yorkshire ${\times}$ Duroc) pigs (78.98kg average initial body weight) were used in a 45 days growth assay. Dietary treatments included 1) Control (basal diet). 2) HBC (Herb and bioceramic complex) 0.1 (basal diet + 0.1％ Herb and bioceramic complex) and 3) HBC 0.2 (basal diet +0.2％ Herb and bioceramic complex). For overall period, ADG (Average Daily weight Gain), ADFI (Average Daily feed Intake) and ADG/ADFI increased in Control with no significant difference (p>0.05). Backfat thickness was not significantly different among the treatments (p>0.05). The total cholesterol, HDL (High Density Lipoprotein) cholesterol, LDL (Low Density Lipoprotein) cholesterol, LDL + VLDL (Very Low Density Lipoprotein) cholesterol, Triglyceride and Atherogenic index concentrations of serum in pigs fed HBC 0.2 diet were lower than those of pigs fed Control and HBC 0.1 diets without significant difference (p>0.05). L$\^$*/-, a$\^$*/-, and b$\^$*/- values of M. longissimus dorsi muscle were not significantly different among the treatments (p>0.05). The pH of pigs fed HBC 0.2 diet was significantly lower than that of pigs fed Control and HBC 0.1 diets (p<0.05). In conclusion, growth performance, cholesterol concentration in serum and meat quality were not affected by supplemental herb and bioceramic complex.

• Food Science of Animal Resources
• /
• v.26 no.2
• /
• pp.197-203
• /
• 2006

This study was conducted to investigate the effect of seleium (Se) and vitamin E supplementation on meat quality and shelf-life in finishing pigs. A total of eighty ($Landrace{\times}Yorkshire{\times}Duroc$) pigs (74.74 initial BW) were randomly allocated into five treatments with four replications and fed for six weeks. Dietary treatments included 1) CON (basal diet), 2) ISE2 (basal diet+0.2 ppm inorganic Se+100 ppm vitamin E), 3) ISE4 (basal diet+0.4 ppm inorganic Se+100 ppm vitamin E), 4) OSE2 (basal diet+0.2 ppm organic Se+100 ppm vitamin E) and 5) OSE4 (basal diet+0.4 ppm organic Se+100 ppm vitamin E). Cooking loss was decreased in treatment of ISE4 as compared with treatment of CON (p<0.05). Crude fat (%) of OSE2 was higher than those of others (p<0.05). Redness ($a^*$- value) of M. longissimus dorsi was increased in treatment of OSE2 as compared with other treatments after 100 of storage (p<0.05). Thiobarbituric acid reactive substances (TBARS) was decreased in treatment of OSE4 compared with treatments of CON and ISE2 after 10d of storage (p<0.05). In conclusion, Se and vitamin E combination did not significantly affect cooking loss,$a^*$- value and TBARS except for cases.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.2
• /
• pp.61-69
• /
• 2003

Surface energy and $CO_2$ fluxes have been measured over a farmland in Haenam, Korea since July 2002. Eddy covariance technique, which is the only direct flux measurement method, was employed to quantitatively understand the interaction between the farmland ecosystem and the atmospheric boundary layer. Maintenance of eddy covariance system was the main concern during the early stage of measurement to minimize gaps and uncertainties in the dataset. Half-hourly averaged $CO_2$ concentration showed distinct diurnal and seasonal variations, which were closely related to changes in net ecosystem exchange (NEE) of $CO_2$. Daytime maximum $CO_2$ uptake was about -1.0 mg $CO_2$ m$^{-2}$ s$^{-1}$ in August whereas nighttime $CO_2$ release was up to 0.3 mg $CO_2$ m$^{-2}$ s$^{-1}$ during the summer. Both daytime $CO_2$ uptake and nighttime release decreased gradually with season. During the winter season, NEE was from near zero to 0.05 mg $CO_2$ m$^{-2}$ s$^{-1}$ . FK site was a moderate sink of atmospheric $CO_2$ until September with daily NEE of 22 g $CO_2$ m$^{-2}$ d$^{-1}$ . In October, it became a weak source of $CO_2$ with an emission rate of 2 g $CO_2$ m$^{-2}$ d$^{-1}$ . Long-term flux measurements will continue at FK site to further investigate inter-annual variability in NEE. to better understand these exchange mechanism and in-depth analysis, process-level field experiments and intensive short-term intercomparisons are also expected to be followed.

• Journal of Bio-Environment Control
• /
• v.15 no.2
• /
• pp.125-137
• /
• 2006

Pleurotus eryngii is one of the most promising mushrooms produced on the domestic farms. The quality as well as quantity of Eryngii is sensitively affected by micro climate factors such as temperature, relative humidity, $CO_2$ concentration, and light intensity. To safely produce high-quality Eryngii all the yew round, it is required that the environmental factors be carefully controlled by well designed structures equipped with various facilities and control systems. At the commercial mushroom cultivation houses of permanent frame type (A, B), this study was carried out to find out reasonable range of each environmental factor and yield together with economic and safe structures influencing on the optimal productivity of Eryngii. This experiment was conducted for about two-year ken Nov. 2003 to Dec. 2005 in cultivation house. Ambient temperature during the experiment period was not predominantly different from that of a normal year. The capacity of the hot water boiler and the piping systems were not enough. Because the capacity of electric heater and air circulation were not enough, air temperatures in cultivation house before improvement of system were maintained somewhat lower than setting temperature, and maximum air temperature difference between the upper and lower growth stage during a heating time period was about 5.1. But the air temperatures after system improvement were maintained within the limits range of setting temperature without happening stagnant of air. Air temperature distribution was generally distributed uniform. Relative humidity in cultivation house before , improvement was widely ranged about $44{\sim}100%$. But as the relative humidity after improvement was ranged approximately $80{\sim}100%$, it was maintained within the range of relative humidity recommended. And $CO_2$ concentration was maintained about $400{\sim}3,300mg{\cdot}L^{-1}$ range. The illuminance in cultivation house was widely distributed in accordance with position, and it was maintained lower than the recommended illuminance range $100{\sim}200lx$. The acidity of midium was some lower range than the recommend acidity range of pH $5.5{\sim}6.5$. The yield was relatively ununiform. In case of bottle capacity of 1,300cc, the mushroom of the lowest grade was less than 3%. The consumption electric energy was quite different according to the cultivation season. The electric energy consumed during heating season was much more than that of cooling season.

• Korean Journal of Ecology and Environment
• /
• v.43 no.2
• /
• pp.263-270
• /
• 2010

This is a research on development of water purification equipment called artificial floating island (=AFI) for the stagnant water area which can secure exuberant landscape and water-friendility. The equipment devised in this study is designed to make up the weakness of conventional AFIs and improves the removal efficiency of pollutants using the mixture of media and plants. The air compressor positioned at the inlet releases air with inflow continuously, the water pump at the outlet sprays as a form of fountain with causing a disturbance on stable water column, then, both of them contribute improvement of water quality over a large area. We applied Bio-stone as a media in this system and performed an experiment of pre-efficiency test, and we concluded that the higher pollutants concentration of inflow, the higher removal efficiency we obtained. At the result of lab-scale experiment, in the case of high-concentration inflow, in the removal efficiency of SS is 62.2%, BOD is 50.2%, COD is 55.1%, T-N is 31.6%, T-P is 38.4%. In addition, to evaluate the field application, we set up the facilities in Sin-gal lake located in Yongin-Si Gyeonggi-Do, and researched on the removal efficiency of outflow relative to the inflow. As a result, SS is 53.5%, BOD is 32.8%, COD is 36.9%, T-N is 22.6%, T-N is 33.2%.

• The korean journal of orthodontics
• /
• v.39 no.1
• /
• pp.43-53
• /
• 2009

Objective: The purpose of this study was to compare the difference in three dimensional tooth movement using three different wire sizes($0.018{\times}0.025-in,\;0.016{\times}0.022-in$ 0.016-in) on a NiTi scissors-bite corrector. Methods: Computed tomography(CT) images of the experimental model before and after tooth movement were taken and reconstructed into three dimensional models for superimposition. The direction and the amount of tooth movement were measured and analyzed statistically. Results: The lingual and intrusive movements of the crown of the maxillary second molar were increased as the size of the NiTi wire increased. The roots of the maxillary second metals moved buccally except for the 0.016-in group. The intrusive movement of the roots of the maxillary second molars was increased as the size of the NiTi wire increased. Due to the use of orthodontic mini-implants, anchorage loss was under 0.2 mm on average. Conclusions: The $0.018{\times}0.025-in$ NiTi wire was most effective in lingual and intrusive movement of the maxillary second molar which was in scissors-bite position. Indirect skeletal anchorage with a single orthodontic mini-implant was rigid enough to prevent anchorage loss.

• Journal of Aquaculture
• /
• v.14 no.3
• /
• pp.197-203
• /
• 2001

To replace fish meal (FM) in the diet of Nile tilapia, Oreochromis nloticus, different levels of Iysine cell mass (LCM) were added to diet on protein equivalent base. fish averaging 3.0 g fed one of nine diets containing isonitrogenous and isocaloric basis of 35% crude protein and 15.3kJ available energy/g diet: $LCM_0, 100% FM: LCM_{10}, 90% FM+10% LCM, LCM_{20}, 80% FM+20% LCM; LCM_{30}, 70% FM+30% LCM; LCM_{40}, 60% FM+40% LCM; LCM_{30}l, 70% FM+30% LCM+lysine; LCM_{30}ln, 70% FM +30% LCM + lysine +NaOH; LCM_{40}lan, 60% FM+40% LCM+lysine+arginine; LCM_{40}/lan, 60% FM+40% LCM+lysine+arginine+NaOH.$. After 8 weeks of feeding trial, there were no significant differences in weight gain (WG) and specific growth rate (SGR) among fish fed LCM$_{0}$ (control diet), LCM_{10}, LCM_{30}, LCM_{40}, LCM_{30}l, LCM_{30}ln, LCA_{40}la and LCM_{40}lan diets (P>0.05)$, while fishes fed $LCM_{20} diet were significantly higher than those fed LCM_{0}, LCM_{30}, LCM_{40}, LCM_{40}la and LCM_{40$}lan diets (P<0.05). There were no significant differences in feed efficiency (FE) and protein efficiency ratio (PER) among fish fed control diet, $LCM_{10}, LCM_{20}, LCM_{30}ln, LCM_{ 40}la and LCM_{40}$lan diets (P>0.05), while fishes fed control diet were significantly higher than those fed $LCM_{30}, LCM_{40} and LCM_{40}l diets (P<0.05)$. Positive effects were not shown in WG and SGR with supplementation of amino acids (lysine & arginine) and neutralizatio, while FE and PER from fish fed $LCM_{40}la and LCM_{40}lan diets were significantly higher than those fed LCM_{30}, LCM_{40} and LCM_{30}$l diets (P<0.05). Hence, LCM can replace FM up to 40%, and dietary suppl-ementacon and neutralization of amino acids showed positive effects, when FE and PER were considered in juvenile tilapia diet.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.24 no.4
• /
• pp.69-79
• /
• 1982

The objective of this study is to contribute to drainage planning in the most realistic and economical way by establishing the relationship between rice yield reduction and overhead flooding by muddy water of each growth stage of paddy, which is the most important factor in determining optimum drainage facilities. This study was based on the data mainly from the experimental reports of the Office of Rural Development of Korea, Reduction Rate Estimation for Summer Crops, published by Ministry of Agriculture and Forestry of Japan and other related research documenta- tion. The results of this study are summarized as follows 1. Damages by overhead flooding are highest in heading stage and have the tendency of decrease in the order of booting stage, panicle formation stage, tillering stage, and stage just after transplanting. Damages by overhead flooding of each growing stage are as follows: a) It is considered that overhead flooding just after transplanting gives a little influence on plant growth and yield because the paddy has sufficient growth period from floo ding to harvest time. b) Jt is analyzed that according to the equation y=11 12x 0.908 which is derived from this study, damages by overhead flooding during tillering stage for 1, 2, 3 successive days are 11.1 %, 20.9%, and 30.2% respectively. c) Damages by overhead flooding after panicle formation stage are very serious because recovering period is very short after damage and ineffective tillering is much. Acc- ording to the equation y=9. 58x+10. Ol derived from this study, damages by overhead flooding fal 1,2,3,5 successive days are 19.6%, 29.2%, 38.8%, 57.9% respectively. d) Booting stage is the very important period in which young panicle has grown up almost completely and the number of glumous flower is fixed since reduction division takes place in the microspore mother cell and enbryo mother cell. According to the equation y=39. 66x 0.558 derived from this study, damages by overhead floodingfor 0.5, 1, 3, 5 successive days are 26.9%, 39.7%, 72. 2% and 97.4%, respectively. Therefore, damages by overhead flooding is very serious during the hooting stage. e) When ear of paddy emerges, flowering begins on that day or the next day; when paddy flowers, fertilization will be completed 2-3 hours after flowering. Therefore overhead flooding during heading stage impedes flowering and increases sterilizing percentage. From this reason damages of heading stage are larger than that of booting stage. According to the equation y-41 94x 0.589 derived from this study, damages by overhead flooding for 0.5, 1, 3, 5, successive days are 27.9%, 63.1 %, 80.1%, and 100% 2. Considering that temperature of booting stage is higher than that of beading stage and plant height of booting stage is ten centimeters shorter than that of heading stage, booting stage should be taken as a critical period for drainage planning because possi- bility of damage occurrence in booting stage is larger than that of heading stage. There-fore, it is considered that booting stage should be taken as critical period of paddy growth for drainage planning. 3. Overhead flooding depth is different depending on the stage of growth. In case, booting stage is adopted as design stage of growth for drainage planning, it is conside red that the allowable flooding depth for new varieties and general varieties are 70cm and 80cm respectively. 4. Reduction Rate Estimation by Wind and Flood for Rice Planting of the present design criteria for drainage planning shows damage by overhead flooding for 1 to 2, 3 to 4, 5 to 7 consecutive days; damages by overhead flooding varies considerably over several hours and experimental condition of soil, variety of paddy, and climate differs with real situation. From these reasons, damage by flooding could not be estimated properly in the past. This study has derived the equation which shows damages by flooding of each growth stage on an hourly basis. Therefore, it has become possible to compute the exact damages in case duration of overhead flooding is known.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.1
• /
• pp.45-54
• /
• 2006

The study was to review methods by which a ship can unfold and tow an oil boom by attaching the opening apparatus to an oil boom through experiments. The shape and dimension of the opening apparatus were designed with the measurement value of the towing tension load of the oil boom and the dimension of winch drum of the oil boom installed in the ship considered. For the field experiment to identify the performance of the opening apparatus, opening apparatuses were prepared to have the dimension of $3.0m^2$ and $6.0m^2$ which is 91% and 75% of the calculation value for type B and C respectively. As a result, T(kg), the value of tension in type B oil boom according to the towing speed(v) change when two ships are towed together were proved to be $T=920v^{1.1}\;and\;T=500v^{0.9}$ in case the distance is 100 m and 50 m. Based on the result, the dimension of the opening apparatus for type B and C oil boom was calculated as $3.3m^2$ and $8.0m^2$ respectively. When unfolding and towing by attaching the opening apparatus and 200 m of towing line at both ends of type B and type C oil boom, the maximum width of the opening apparatus was shown as 114 m and 95 m in average(width of opening/total length of oil boom: 33% and 57%) in the towing speed of 1.5 kt. It was evaluated that the opening apparatus could concentrate the spilled oil in a good performance. However as far as the increase rate of oil boom opening width according to the length of the towing line is debatable, the increase rate is remarkably reduced when it is lengthened from 100 m to 150 m and to 200 m although it showed extreme increase of 31% and 40% when the length of the towing line was changed from 50 m to 100 m. Therefore, it is inferred that the towing line should be maintained more or less 100 m to get good spread efficiency of the opening apparatus. Additionally, if the towing speed is faster than 1.5 kt, the opening width was narrowed because of the reduced spread efficiency and the shape of the oil boom can be unstable because of the partial sinking of the oil boom, run over waves, or flap of skirt. Thus the reasonable towing speed can be within 1.5 kt for the operation of the opening apparatus.