• Clinical and Experimental Pediatrics
• /
• v.50 no.11
• /
• pp.1061-1066
• /
• 2007

Purpose : Early identification of developmental disabilities allows intervention at the earliest possible point to improve the developmental potential. The Ages and Stages Questionnaire (ASQ), a parent- completed questionnaire, can be used as a substitute for formal screening tests. The purpose of this study was to evaluate the validity of the Korean version of the ASQ (K-ASQ) as a screening tool for detecting developmental delay of young Korean children in the setting of a busy pediatric outpatient clinic. Methods : Parents completed the K-ASQ in the waiting room of the pediatric outpatient clinic of St. Mary's Hospital, Catholic University Medical College. Out of 150 completed the ASQ, 67 who were born term and had no previous diagnosis of developmental delay, congenital anomalies, or neurological abnormalities were enrolled. The cut-off values of less than 2 standard deviations (SD) below the mean for the ASQ were used to define a "fail", and children who failed in one or more domains tested were classified as "screen-positive". Diagnosis of developmental delay was made when the developmental indices fell below -1 SD of the Bayley Scales of Infant Development-II. Results : (1) The mean age of children was $16.4{\pm}7.4$ months. Ten children (14.9%) were small-for- gestational age infants. The mean birth weight and gestational age were $3.1{\pm}0.6kg$ and $38.8{\pm}1.4$ weeks. Nine children (13.4%) were twins and 33 (49.0%) were male. The mean maternal education in years was $13.6{\pm}2.4$, and 31.3% had full-time jobs. The time for completing the ASQ was $10.2{\pm}3.0$ minutes. (2) Seventeen children (25.4%) were classified as screen-positive, four of them were delayed in development. Among eight children diagnosed with developmental delay, four were screen-positive and the other four were screen-negative by the ASQ. (3) The test characteristics of the ASQ were as follows: sensitivity (50.0%); specificity (78.0%); positive predictive value (23.5%); negative predictive value (92.0%). Conclusion : The high negative predictive value of the K-ASQ supports its use as a screening tool for developmental delay in the setting of a pediatric outpatient clinic.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.2
• /
• pp.26-29
• /
• 2011

Purpose: The general test method of the Korean Pharmacopeia specifies the test method on the clauses of quality control after manufacturing. According to KFDA Guidance for Medicines, standards of residual solvents regulates the maximum permissible dose of acetonitrile as 400 ppm, ethanol as 5,000 ppm, and acetic acid as 5,000 ppm. This study aims at identifying the type of resiual solvents in the final [F-18]FDG vial of an automatic synthesizer and measure its residual quantity. Materials and Methods: The center carried out residual solvents test of [F-18]FDG injection using Agilent Technologies 7890A with a Flame Ionization Detector. The column of Agilent Technologies 7890A used in measuring of residual solvents was CP WAX column ($30m{\times}0.53mm{\times}1.0{\mu}m$) and analysis condition was split mode 1:1 at the initial temperature $70^{\circ}C$ which was increased $20^{\circ}C/minute$ after two minutes and maintained at the final $140^{\circ}C$ for two minutes. The analysis method was as following: Firstly, ethanol-acetonitrile-acetic acid mixture was classified into four types of concentration (250-25-250 ppm, 1,000-100-1,000 ppm, 3,000-300-3,000 ppm, and 6,000-600-6,000 ppm), and $1.0{\mu}L$ of each type of concentration was injected into gas chromatography followed by an analysis of its peak domain. Then, a calibration-curve by the external standard method was drawn based on the analysis result. Results: While ethanol and acetonitrile were detected in TRACERlab MX, FASTlab had additional acetic acid. The residual quantity of the ethanol-acetonitrile-acetic acid mixture evaluated using the calibration-curve was average 72 ppm ethanol, 54 ppm acetonitrile, and 1030 ppm acetic acid for FASTlab, whereas average 439 ppm ethanol and 79 ppm acetonitrile for TRACERlab MX. This indicated that both of them were within the maximum permissible dose. Conclusion: Solvent residues in the [F-18]FDG injection were all within maximum permissible doses and proper to be used to examine a patient. The result indicated that types and quantities of solvent resides of radioactive pharmaceuticals vary depending on the automatic synthesizer.

• Journal of dental hygiene science
• /
• v.6 no.3
• /
• pp.147-152
• /
• 2006

The purpose of this study was to help decrease turnover and to make full use of dental hygienists and to help improve management by managers. After relevant literature and data were reviewed, a survey was conducted on dental hygienists, who worked at dental institutes in different areas, for about four months from September through December, 2004, to find out their turnover intention and job satisfaction level. When the collected data were analyzed, the following findings were given: 1. The collective average of the dental hygienists investigated in job satisfaction was $3.30{\pm}0.70$. By area, they expressed the best satisfaction at a clear role factors with a mean of $3.53{\pm}0.73$, and they were pleased with wages factors and promotion factors the least with an average of $3.14{\pm}0.70$ and $3.18{\pm}0.80$. 2. The collective average of the dental hygienists investigated in turnover intention was $3.23{\pm}0.77$. As for connections between general characteristics and turnover intention, By age, those who aged in 21 and 25 were most intended(p < 0.001). The unmarried dental hygienists were more intended than the married ones(p < 0.001). By type of hospital, those who worked at dental clinics were most intended(p< 0.01). By career, those who had worked at one to three years were intended the most(p < 0.001), and as to the length of service at current work places, those who had worked at their current work places for one to three years were intended the most(p < 0.001). By monthly mean pay, those whose pay ranged from 1.3 to 1.6 million won found their turnover most intended(p< 0.01). 3. Regarding correlation among turnover intention and job satisfaction were both inversed correlationship, and wages factor(r = -0.249, p < 0.01) and interrelationship factors(r = -0.218, p < 0.01) had a strong correlation to turnover intention, and clear role factors had a strong correlation to job contents factors by job satisfaction(r = 0.612, p < 0.01), and job satisfaction factors had a strong correlation to job contents factors(r = 0.759, p < 0.01).

• Journal of Hospice and Palliative Care
• /
• v.10 no.3
• /
• pp.137-144
• /
• 2007

Purpose: The purpose of this study is to identify and assess the needs of the cancer patients and their families and provide basic data to meet with their needs. Methods: This is a descriptive study using questionnaire method. Questionnaire were collected by mail from 76 discharged patients from a hospice ward from May until the end of October, 2004, and data were analyzed by SPSS 10.0. Results: Admitted patients had needs of pain control (85.5%), non-pain symptoms (63.2%) such as vomiting, dyspnea, ascites, etc, and emotional and spiritual problem solving (28.9%, 14.5%). Interests of patients were health care of himself/herself (65.8%), concern for their spouses left alone (32.9%), and future of their children (15.8%). In families' needs of care of 5 areas, "information on patient's status and treatment/nursing care" was shown most high score ($3.48{\pm}0.62$). In detailed questions, they request most 'to inform the prognosis of patients' and the next is 'to inform the reasons that nursing care was required'. The next highest score was to 'inform family roles' ($3.39{\pm}0.64$), and next was spiritual support ($3.11{\pm}0.79$), and emotional support ($3.08{\pm}0.72$). Expectations of family on the treatment were comfortable dying (73.4%) scored the highest. Patients' families were satisfied with volunteer service most in service area (97.4%). The next was pain control (89.5%) and nursing service (77.6%). Conclusion: Health care staff should identify the actual needs of families caring cancer patients and they should operate realistic programme which can give continuous and assistance by reflecting individual needs and characteristics. With these srategies, the quality of life of patients and families can be improved. And then the intervention programme should be developed to measure subjective nursing care needs of terminally ill cancer patients and their families.

• Korean Journal of Food Science and Technology
• /
• v.39 no.5
• /
• pp.534-540
• /
• 2007

In this study, waxy rice starch was chemically modified using phosphorous oxychloride ($POCl_3$, 0.002-0.008%). Then the physicochemical properties of resulting cross-linked waxy rice starches were investigated in order to reduce the steeping time of Yukwa (a Korean oil-puffed rice snack) processing. The swelling powers of the cross-linked waxy rice starch samples were higher than the native waxy rice starch at temperatures above $60^{\circ}C$, and their increases were proportional to the $POCl_3$, concentration. The solubility of the cross-linked waxy rice starch was lower (1.6-3.4%) than the native waxy rice starch (2.7-6.1%). However, the moisture sorption isotherm of the cross-linked waxy rice starch was not significantly different from the native waxy rice starch. The rapid visco analyze. (RVA) pasting temperatures $(65.4-67^{\circ}C)$ of the cross-linked waxy rice starch were lower than those of the native starch $(67^{\circ}C)$. The RVA peak viscosities (287-337 RVU) of the cross-linked waxy rice starch were higher than that of native starch (179 rapid visco units (RVU)), and increased with increasing $POCl_3$ concentration. For the differential scornning calorimeter thermal characteristics, although Tc shifted toward higher temperatures with cross-linking, the To, Tp, and amylopectiin melting enthalpy of the cross-linked waxy rice starch showed no differences compared to the native waxy rice starch. The X-ray diffraction patterns of both the native and cross-linked waxy rice starches showed typical A-type crystal patterns, suggesting that cross-linking mainly occurs in the amorphous regions of starch granules. Therefore, the cross-linking reaction did not change the crystalline region, but altered the amorphous region of the waxy rice starch molecules, resulting in changes of solubility and RVA pasting properties in the cross-linked waxy rice starch. In summary, since cross-linked waxy rice starch has a high puffing efficiency and no browning reaction, it may be applicable for Yukwa processing without a long steeping process.

• Research in Plant Disease
• /
• v.22 no.2
• /
• pp.72-80
• /
• 2016

Gummy stem blight, caused by the fungus Didymella bryoniae, is major disease of watermelons worldwide. The objective of the present study was to establish an efficient screening system to identify watermelon resistant to D. bryoniae. An GSB3 isolate was prepared from a watermelon plant showing typical symptoms of gummy stem blight in Haman-gun and identified as D. bryoniae based on molecular analysis of internal transcribed spacer sequence. A simple mass-production technique of inoculum was developed based on spore production of D. bryoniae GSB3 under several incubation conditions and their virulence on watermelon plants. Resistance degrees of 22 commercial watermelon cultivars to the GSB3 isolate were evaluated. Among them, four watermelon cultivars showing different degree of resistance response were selected for further study. Development of disease on the cultivars according to various conditions including inoculum concentrations, incubation periods in dew chamber, and incubation temperatures was investigated. From the results, we suggest an efficient screening method for resistant watermelon cultivars to gummy stem blight. Seeds of watermelon cultivar are sown and grown in a greenhouse until plant stage of 2-fully expanded leaves. Seedlings are inoculated with D. bryoniae by spraying spore suspension of the fungus at a concentration of $5.0{\times}10^5spores/ml$. The infected plants are incubated in humidity chamber at $25^{\circ}C$ for 48 hours and then transferred to a growth chamber at $25^{\circ}C$ and 80% relative humidity with 12-hour light a day. Three to four days after inoculation, disease severity of the plant are measured using percentage of infected leaf area.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.3
• /
• pp.313-320
• /
• 2008

Hectorite was synthesized under hydrothermal conditions and its physicochemical properties have been investigated in terms of temperature, pH, and organic agent to observe the change of doll basal spacing. The IR, CEC, MB, swelling volume and specific surface area of the hectorite were measured for the characterization. The solid/liquid ratio of hectorite to distilled water before mixing with other materials was also determined for its use as a multi-functional material. The $d_{001}$ basal spacing decreased from $12.63\;\AA$ at room temperature to $10.19\;\AA$ at $650^{\circ}C$ in the heating tests. As the pH of hectorite slurry increased. the $d_{001}$ basal spacing decreased. reaching the lowest value of $13.33\;\AA$ at pH 7 and afterward, increased. All the fool basal spacings of the hectorite increased when it was intercalated with the following solvents: $12.86\;\AA$ in diethyl ether, $13.31\;\AA$ in acetonitrile. $13.59\;\AA$ in methanol, $14.05\;\AA$ in ethanol, $15.69\;\AA$ in acetone, and $17.42\;\AA$ in ethylene glycol. Our IR analysis results were in good agreement with those of other researchers. The CEC, MB, swelling volume and specific surface area of hectorite were determined to be 105 cmol/kg, 80 cmol/kg, $68\sim74ml/2g$ and $213m^{2}/g$, respectively. Also, the hectorite to distilled water ratio of 2 to 100 was found to be most favorable for mixing with other materials such as the solvents mentioned above.

• Journal of the Korean Society of Radiology
• /
• v.9 no.1
• /
• pp.9-16
• /
• 2015

The purpose of this study is finding optimum contrast medium quantity during abdominal CT using dual energy technique. The study subjects are 30 patients who had received general single energy abdominal CT and received double energy technique follow-up abdominal CT. dual energy technique abdominal CT images were obtained after setting contrast medium quantities at 30%, 40%, 50%, 60% and 70% of contrast medium quantity at the time of single energy technique. Then the contrast enhancement (Hounsfield Unit; HU) was estimated by setting-up the regions of interest at aorta, inferior vena cava, hepatic portal vein and hepatic parenchymal. The obtained values were compared to the values of the same parts measured during single energy technique abdominal CT. The results of the study were as following. The 60% set up group had HU in aorta : $210.80{\pm}13.609$, IVC : $190.40{\pm}25.215$, hepatic portal vein : $198.40{\pm}21.232$ and hepatic parenchymal : $119.20{\pm}7.98$, The single energy abdomianl CT images had HU in aorta : $205.40{\pm}16.426$, IVC : $188.20{\pm}21.476$, hepatic portal vein : $195.40{\pm}22.744$ and hepatic parenchymal : $121.00{\pm}6.595$. Therefore, it is possible to obtain contrast enhancement by dual energy technique abdominal CT similar to the same by single energy technique abdominal CT by setting-up the quantity of contrast medium at 60% of contrast medium at the time of single energy technique abdominal CT. Based on the result of this study, it is possible to decrease existing quantity of contrast medium by _% and the injection velocity can be also decreased. Accordingly, it is believed that the result of study would be quite useful for patients who have renal function disorder, weak vein or side effect of contrast medium in the past.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.4
• /
• pp.292-301
• /
• 2001

The objectives of this study were to measure the changes in soil moisture regimes and the distribution patterns of inorganic N derived from the fertigated $^{15}N$-labeled urea, and compare them with the results obtained from broadcast-applied soil under the same drip irrigation domain. In fertigated soil, a $^{15}N$-labeled urea solution of $117mg\;N\;L^{-1}$ was applied by surface drip irrigation for 4 weeks. In broadcast-applied soil, no the other hand, 4 g of $^{15}N$-labeled urea(1.87 g N) mixed thoroughly with 5 kg of soil was placed on the surface of packed soil. Soil water status was controlled by drip irrigation scheduled at soil matric potential of -50 kPa. A calibrated time-domain reflectometry probe was installed in the soil vertically 15 cm apart from a drip emitter to control drip irrigation. About 60% of urea-derived inorganic nitrogen was remained in the top zone between 0 and 10 cm depth of fertigated soil, while, most of the inorganic nitrogen (91%) was accumulated in the top zone of broadcast-applied soil. Of inorganic nitrogen derived from urea, the percentage of $NO_3{^-}$ was much higher for fertigation (99%) than for surface application (62%). The relatively lower recovery of urea-derived inorganic nitrogen of broadcast-applied urea-N (51%) than that of fertigated urea-N (89%) was attributable to enhanced $NH_3$ volatilization.

• The Journal of Korean Society for Radiation Therapy
• /
• v.24 no.2
• /
• pp.149-155
• /
• 2012

Purpose: Long Extension (LE) is used in proton therapy for lung and abdomen. However, it has limitations in surface area, produces collision in posterior oblique beam which creates limitations in various gantry angles in planning therapy and increases air gap (distance between patient and compensator). Therefore, this study investigates the usability of manufactured Rounded Extension (RE) in comparison to LE to use the most suitable extension in proton therapy. Materials and Methods: To compare structural features of LE and RE. This study investigated usable gantry angle for snout sizes 100, 180 and 250 and CT scanned Humanoid phantom. And it compared the air gap in posterior oblique direction. Results: The structural features of two extensions are as follow. Because of the existence of supporting bar, the width of LE was 40 cm and RE was 50 cm. Result of the investigation of usable gantry angle for snout sizes 100, 180 and 250 are as follow. LE is ${\pm}36$ (average) at 180 degree and RE is ${\pm}70$ (average). And also, the air gap of RE is decreased by 11.3 cm in average at the same gantry angle. Conclusion: Manufactured RE for proton therapy has several benefits than LE. Its therapy surface area is wider and range of usable gantry angle is also wider. Also, the air gap at the posterior oblique beam has decreased. Therefore the usability of RE in proton therapy of lung and abdomen will be increased compared to LE. However, the air gap of proton therapy at the lateral direction may be increased, so there may be need for make up to decrease air gap at the lateral direction in the future.