• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.3
• /
• pp.153-164
• /
• 2007

The Access Grid (AG) provides collaboration environments over the IP multicast networks by enabling efficient exchange of multimedia contents among remote users; however, since lots of current networks are still multicast-disabled, it is not easy to deploy this multicast-based multi-party AG. For this problem, the AG provides multicast bridges as a solution by putting a relay server into the multicast networks. Multicast-disabled clients make UDP connections with this relay server and receive forwarded multicast traffics in unicast UDP packets. This solution is facing several limitations since it requires duplicate forwarding of the same packet for each unicast peer. Thus, in this paper, we propose an alternate solution for the multicast connectivity problem of the AG based on the UMTP (UDP multicast tunneling protocol). By taking advantage of flexibilities of UMTP, the proposed solution is designed to improve the efficiency of network and system utilization, to allow reuse of multicast-based AG applications without modification, and to partially address the NAT/firewall traversal issues. To verify the feasibility of proposed solution, we have implemented a prototype AG connectivity tool based on the UMTP, named as the AG Connector.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.4
• /
• pp.317-324
• /
• 2001

This paper proposes a SSSC based on 3-level half-bridge inverters. The dynamic characteristic of the proposed SSSC was analyzed by EMTP simulation and a scaled hardware model, assuming that the SSSC is inserted in the transmission line of the one-machine-infinite-but power system. The proposed SSC has six 3-level half-bridge inverters per phase, which operates in PWM mode. The proposed SSSC generates a quasi-sinusoidal output voltage by 90 degree phase shift to the line current. The proposed SSSC does not require the coupling transformer for voltage injection, and has a flexibility in operation voltage by increasing the number of series connection.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.8
• /
• pp.49-58
• /
• 2015

A floating type of memristor emulator which acts like the behavior of $TiO_2$ memristor has been developed. Most of existing memristor emulators are grounded type which is built disregarding the connectivity with other memristor or other devices. The developed memristor emulator is a floating type whose output does not need to be grounded. Therefore, the emulator is able to be connected with other devices and be utilized for the interoperability test with various other circuits. To prove the floating function of the proposed memristor emulator, a Wheatstone bridge is built by connecting 4 memristor emulators in series and parallel. Also this bridge circuit suggest that it is possible to weight calculation of the neural network synapse.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12B
• /
• pp.779-789
• /
• 2007

This paper presents an architecture of UPnP Bridge for interconnecting Non-lP devices with heterogeneous network interfaces to UPnP devices on UPnP networks. The proposed UPnP Bridge provides a Virtual UPnP device that performs generic UPnP Device's functionalities on behalf of Non-lP device. This paper defines 3 types of descriptions, Device Description, Message Field Description, and Extended UPnP Service Description in order to reduce the amount of effort required to connect a non-lP device with a new interface or message format to UPnP network. By these three types of descriptions and Message conversion module, developers for Non-lP devices can easily connect the devices to UPnP network without additional programming. So UPnP control point controls Non-lP devices as generic UPnP device. Some experiments validate the proposed architecture, which are performed on a test bed consisting of UPnP network the proposed bridge, and non-lP devices with CAN and RS232 interfaces.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.54-55
• /
• 2018

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.1-2
• /
• 2010

본 논문에서는 친환경 차량의 On-board charger를 위한 ZVZCS 하프브리지 컨버터를 제안한다. 제안하는 컨버터는 다이오드에 병렬 연결된 작은 커패시터로 인하여 Asymmetrical PWM 스위칭시의 단점인 상 하측 스위치의 전류 비대칭성을 완화시키며 스위치 최대 전류를 감소시켜 턴오프 손실을 줄일수 있다. 또한 다이오드 턴오프시 dv/dt가 매우 작아 스위칭 손실 및 노이즈를 최소화 할 수 있다.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.67-69
• /
• 2020

본 논문은 평면 변압기에서 발생하는 공통모드 노이즈를 제거하기 위해 새로운 회로 구조 및 변압기의 와인딩 레이아웃을 제안한다. 제안하는 컨버터는 1차측의 병렬구조로 인하여 풀-브리지와 같은 구조를 갖고 있고, 높은 파워의 어플리케이션에 적합하게 사용되어질 수 있다. 2개의 하프-브리지 LLC 공진형 컨버터 변압기의 1차측은 한쪽 끝이 정전압 전위를 갖도록 연결되어 있다. 이에 따라 같은 dv/dt 특성을 갖는 1차측과 2차측 와인딩이 존재하게 되고, 이러한 와인딩을 인접하게 배치하는 구조를 통해 변압기에서 발생하는 공통모드 노이즈를 크게 줄일 수 있다. 최종적으로 EMI 필터의 크기를 크게 줄일 수 있고, 높은 전력밀도를 달성할 수 있다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.6
• /
• pp.10-15
• /
• 2008

In this paper, a new NMOS gate cross-connected current-mirror type bridge rectifier for UHF RFID applications is presented. The DC converting characteristics of the proposed rectifier are analyzed with the high frequency equivalent circuit and the gate capacitance reduction technique for reducing the gate leakage current due to the increasing of operating frequency is also proposed theoretically by circuitry method. As the results, the proposed rectifier shows nearly same DC output voltages as the existing NMOS gate cross-connected rectifier, but it shows the gate leakage current reduced to less than 1/4 and the power consumption reduced more than 30% at the load resistor, and it shows more stable DC supply voltages for the valiance of load resistance. In addition, the proposed rectifier shows high enough and well-rectified DC voltages for the frequency range of 13.56MHz HF(for ISO 18000-3), 915MHz UHF(for ISO 18000-6), and 2.45 GHz microwave(for ISO 18000-4). Therefore, the proposed rectifier can be used as a general purpose one to drive RFID transponder chips on various RFID systems which use specified frequencies.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.50-51
• /
• 2015

본 논문에서는 다수의 PV-부스트 컨버터를 입력으로 하는 계통연계형 풀브리지 인버터의 DC링크 커패시터간 전압 균등화 방법을 제안한다. 다수의 PV가 입력으로 연결된 인버터의 경우 각 PV의 부분 그늘짐 현상과 같은 조건에 따라서 최대 전력점이 달라질 수 있다. 각각의 PV와 연결된 부스트 컨버터의 출력 은 인버터의 DC링크 커패시터로서 각각이 직렬로 연결되는데 각 전압 분배는 PV의 입력에 따라 결정되게 된다. PV의 발전조건이 바뀌어 부스트 출력전압 편차가 극심해져서 더 이상 부스트 컨버터로서의 역할을 할 수 없는 조건이 갖춰진다면 PV에서의 안정적인 발전을 기대할 수 없을 것이다. 또한 DC링크 커패시터 간 전압의 불균형은 시스템을 설계함에 있어서 소자의 더 넓은 범위에서의 동작조건을 만족시켜야 하기 때문에 효율 면에서 나쁜 영향을 미치게 된다. 시뮬레이션을 통해서 DC링크 커패시터 간 전압 균등화 방법을 검증하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.11
• /
• pp.1206-1218
• /
• 1992

Token ring systems which control to switch the data stream of networks by passing the token have been widely used to medium access controls in many ring or bus topology LANs. The system could be modeled for analysis as single-server-multi-queue system of the cyclic service method. These concepts could be expanded to multi-token ring systems interconnected with single ring consisting of bridges implemented simply to be stored and transmitted. In the proposal for the performance analysis of the interconnected token ring system, in has been assumed M/G/1 queueing model that frame arrivals are the Poisson process at each station queue and frame sizes are independently and identically distributed. And the average time delays were analyzed mathematically for arbitrary frame transferred from source station to destination area. The time delay of the frame transmission could be explained as the sum of the average time which the token passed from arbitrary position to source station, such as the waiting time in the source station transferring the previous arrival frames, and the propagation time from source station to interdestinated point. These delays were given as the sum of the duration from inner and outer bridge queues, the time delays from inner and outer bridge queues, and the time from outer bridge queue to destination station. These results were investigated by varing parameters effected to total time delays. In the results, those factors to be effected to dominant the total time delays were increased were in the cases of the high arrival rates and the high ration of destination of the other outerring. The system were shown the time delays increased exponentially in spite of the priority service policy. In order to decreasing the number of outerrings and increasing the number of nodes in backbone relatively, so the systems could be decreased the total delay in the interconnected token ring system.