• Journal of the Korean Geotechnical Society
• /
• v.17 no.3
• /
• pp.15-23
• /
• 2001

탄소성 캡 모델의 중요한 장점은 여러 가지 다공체의 전체적인 축차 및 체적의 비선형 상호거동을 동시에 다룰 수 있음에 있다. 그러나 대부분의 캡 모델이 가진 문제점중의 하나는 세 개의 독립적인 항복면이 불연속으로 연결되어 있음으로부터 기인된다. 본 연구에서는 이러한 항복면 사이의 연결점에서의 탄소성 접선 계수는 특이점이 되고 수치해석상 잠재적인 어려움을 내재하고 있음을 나타내고 이러한 문제의 해결방안의 하나로 세 개의 항복면이 연속적으로 만나는 새로운 탄소성 캡 모델을 제시하였다. 본 논문에서는 모델의 증분형태의 구성식 및 새로운 응력을 구하기 위한 활동 항복면의 결정을 판단하는 알고리즘이 제시되었다. 동반 논문에서는 내재적인 응력적분 및 일관적인 접선계수를 유도하였고 예제계산들을 수행하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.4
• /
• pp.471-477
• /
• 1985

본 논문에서는 SUPERB/SUPERTAB 구조해석 소프트웨어를 연결봉의 캡과 로드부, 보울트헤드와 로드, 나사를 일체로 모델링하고 응력을 해석하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.8
• /
• pp.5-12
• /
• 2019

A pile group, that consists of several piles connected by a pile cap, is used as the superstructure. The pile supports vertical and horizontal load to design the pile group, but the effect of bearing capacity of the pile cap has not considered. Various researches have been conducted to reflect the effect of bearing capacity of the pile cap in order to reduce the amount of piles in the range of the stability under the vertical load of the superstructure. However, the effect of bearing capacity under the horizontal seismic load has not been studied adequately. Therefore, a shaking table test was carried out with different-sized pile caps that support the superstructure in this study. This test was to verify the influence of the size of the pile cap in the group pile under the horizontal load. The result shows that the size of the pile cap affects to the dynamic behavior of the superstructure and the pile group. Also, the bigger size of the pile group makes the larger constraint effect of ground, and it results that both the ground and the pile moves as a whole.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.3
• /
• pp.25-32
• /
• 2001

보편적인 탄소성 캡 모델은 전통적인 등방 이론에 기초를 두고 있다. 이러한 모델의 응력적분 및 접선 계수의 유도는 여러 가지 논문들에 나타나 있지만 축차 및 체적 거동을 동시에 다루는 내제적인 해석법을 통한 지반해석은 아직까지는 많은 도전이 요구되고 있다. 앞선 동반 논문에서는 비연속적으로 연결된 항복면 사이의 접선 계수는 특이점이 됨을 나타내었고 이에 대하여 새로운 캡 모델의 구성식이 제시되었다. 본 논문에서는 제시된 캡 모델의 비 조건적이고 안정된 내재적 응력적분 및 일관된 탄소성 접선계수를 유도하였다. 또한 간단한 예제를 통하여 모델의 수행능력을 보여주었고 사면안정계산이 수행되었다.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.7
• /
• pp.61-73
• /
• 2008

Piles of a bridge pier are connected with the column through the pile cap (footing). Behavior of the pile foundation can be different according to the connection method between piles and the pile cap. Connection methods between pile heads and the pile cap are divided into two groups : rigid connections and hinge connections. Domestic design code has been specified to use rigid connection method for the highway bridge. In the rigid connection method, maximum bending moment of a pile occurs at the pile head and this helps the pile to prevent the excessive displacement. Rigid methods are also good to improve the seismic performance. However, some specifications prescribe that conservative results through investigations of both the fixed-head condition and the free-head condition should be reflected in the design. This statement may induce an over-estimated design for the bridge which has high-quality structures with casing covered drilled shafts and the PC-house contained pile cap. Because the assumption of free-head conditions (hinge connections) is unreal for the elevated pile cap system with multiple piles of the long span sea-crossing bridges. On the other hand, elastic displacement method to evaluate the pile reactions under the pile cap is not suitable for this type of bridges due to impractical assumptions. So, full modeling techniques which analyze the superstructure and the substructure simultaneously should be performed. Loads and stress state of the large diameter drilled shaft and the pile cap for Incheon Bridge which will be the longest bridge of Korea were investigated through the full modeling for rigid connection conditions.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.5
• /
• pp.543-553
• /
• 2013

As the deep deck plate has the shape of open cross section, It can cause structural problems such as bending torsions due to instability of the section. There are a number of fasteners types which are frequently used on light gage steel diaphragms such as bolts, rivets, welds, and screws. In this study, the structural capacity of the self drilling screw connection between the deep deck and the reinforced cap plate was evaluated by experimental variables such as the arrangement method, numbers of screw, pitch of screw, and head plate thickness.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.11
• /
• pp.17-26
• /
• 2009

The concrete cap, which was established on the top of the micropile, usually considered as an important structural component in micropile supported foundation systems. However, relatively few studies have been made on the load sharing behavior of the capped micropile foundation systems. The primary objective of this study is to assess the load sharing behavior of the capped micropile foundation systems. Therefore, a full-scale test on an instrumented capped micropile is conducted for establishing the load-displacement responses. Nonlinear numerical method was used to quantify the load sharing behavior of the pile cap and micropile respectively. As a result, it was found that the pile cap shares about 50% load from final loading steps in the case of 2 by 1 micropile foundation systems. In the case of 2 by 2, the pile cap shares about 30% load from final loading steps. In addition, the load sharing behavior of the micropile cap becomes larger with an increase in spacing and the battered angle of micropile respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.5
• /
• pp.486-487
• /
• 1997

This paper presents the pure capacitive lumped element equivalent circuits for several coplanar waveguide(CPW) discontinuities such as an open-end, an open-end with connected ground planes, a gap and an open-end CPW stub and gives their capacitive element values as a function of physical dimensions of the discontinuity and the frequency for a specific substrate. The capacitive element values are determined from the scattering parameters which are obtained using the finite-difference time-domain(FDTD) method. For an open-end, an open-end with connected ground planes and a gap, the numerical results of the FDTD are compared with the quasi-static results which are calculated using the three- dimensional finite difference method(3D-FDM).

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.3
• /
• pp.367-372
• /
• 1985

본 연구에서는 Heuer는 원추형 애자의 해석을 ANSYS프그램을 사용하여 시도하 였으나 시멘트와 자기간의 접촉문제를 다루지 않았고, Iwama와 Kito는 이에 대한 언급 이 없이 유한요소법에 의한 자기내부의 응력분포 결과와 실험식과를 개략적으로 비교 하였다. Fig. 1은 현수애자의 외관과 단면도이다. 철재의 핀(Pin)과 캡(cap), 자 기, 철재와 자기를 접착시키는 시멘트(cement), 접촉면의 불균일 상태를 보상시키는 역청(bituminous layer), 그리고 시멘트와 자기간의 사층(sand band)으로 구성되어 있 는 현수애자의 핀의 하단에서 송전선 무게의 하중이 가해지고 캡의 홈으로 다른 애자 가 연결되어 송전탑에 부착된다. 본 해석에서는 핀의 하단에 정적으로 사용하중이 가해진다고 가정하였다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.2
• /
• pp.105-111
• /
• 2001

The shrinking generator is simple and stateable, and known that has good security properties. The bits of one output( $R_1$) are used to determine whether the corresponding bits of the second output will be used as part of the overall keystream. Two LFSRs consisting the generator generate pseudorandom sequences satisfying Golomb's postulates. We used this property to analyze the stream of LFSR $R_1$ of the generator.