• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.5
• /
• pp.675-687
• /
• 2019

In recent years, the needs for double deck-tunnels have increased in large cities due to the increase in traffic volume and high land compensation costs. In Korea, a network type tunnel which is smaller than general road tunnels and crosses another tunnel underground is planned. In the shield tunnel joints between the existing shield tunnel and the box-type enlargement section, a partial steel-concrete joint is proposed where the bending moment is large instead of the existing full-section steel joint. In order to analysis the enlargement section of the shield tunnel diverged section to reflect the three-dimensional effect, the two-dimensional analysis model is considered to consider the column effect and the stiffness effect of the longitudinal member. A two-dimensional analysis method is proposed to reflect the stiffness of the longitudinal member and the column effect of the longitudinal point by considering the rigidity of the longitudinal member as the elastic spring point of the connecting part in the lateral model. As a result of the analysis of the model using the longitudinal member, it was considered that the structural safety of the partial steel-concrete joint can be secured by reducing the bending moment of the joint and the box member by introducing the longitudinal member having the stiffness equal to or greater than a certain value.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.4
• /
• pp.305-330
• /
• 2023

Unlike NATM tunnels, Shield TBM tunnels have split linings. Therefore, the stress distribution of the lining is different even if the lining is under the same load. Representative methods for analyzing the stress generated in lining in Shield TBM tunnels include Non-joint Mode that does not consider connections and a 2-ring beam-spring model that considers ring-to-ring joints and segment connections. This study is an analysis method by Break-joint Mode. However, we do not consider the structural role of segment lining connections. The effectiveness of the modeling is verified by analyzing behavioral characteristics against vibration loads by modeling with segment connection interfaces to which vertical stiffness and shear stiffness, which are friction components, are applied. Unlike the Non-joint mode, where the greatest stress occurs on the crown for static loads such as earth pressure, the stress distribution caused by contact between segment lining and friction stiffness produced the smallest stress in the crown key segment where segment connections were concentrated. The stress distribution was clearly distinguished based on segment connections. The results of static analysis by earth pressure, etc., produced up to seven times the stress generated in Non-joint mode compared to the stress generated by Break-joint Mode. This result is consistent with the stress distribution pattern of the 2-ring beam-spring model. However, as for the stress value for the train vibration load, the stress of Break-joint Mode was greater than that of Non-joint mode. This is a different result from the static mechanics concept that a segment ring consisting of a combination of short members is integrated in the circumferential direction, resulting in a smaller stress than Non-joint mode with a relatively longer member length.

• Computational Structural Engineering
• /
• v.2 no.4
• /
• pp.79-88
• /
• 1989

The behavior of composite beams in steel building structures subjected to lateral loading is studied. Mathematical models for the stiffness of composite beams and the strength at the connections, which are dependent on details of the connections are developed based on the previous experimental results and the results from numerical analyses. Analytical models for the skeleton and hysteresis curves of cantilever composite beams are also presented. A single component model for the composite beam, consisting of elastic beam and the end springs at which all the inelstic deformations within a member are lumped, is implemented into the computer program, DRAIN-2D. And a comparison of analytical results is made with the experimental results.

• Composites Research
• /
• v.12 no.2
• /
• pp.1-9
• /
• 1999

The piezoelectric material connected to external electric networks possesses frequency dependent stiffness and loss factor which are also affected by the shunting circuit. The external electric networks are generally specialized for two shunting circuits: one is the case of a resistor alone and the other is the combination of a resistor and an inductor. For resistive shunting, the material properties exhibit frequency dependency similar to viscoelastic materials, but are much stiffer and more independent of temperature. Shunting with a resistor and inductor introduces an electrical resonance, which can change the characteristics of structural resonance optimally in a manner analogous to a PMD (proof mass damper). Passive damping enhancement of composite beam using piezoelectric material connected to external electrical networks is achieved and presented in this paper.

• Journal of the KSME
• /
• v.28 no.2
• /
• pp.119-122
• /
• 1988

방잰(vibration isolation)의 목적으로 기계 구조물의 연결부에 점탄성 재질의 요소들이 사용되어 온지는 매우 오래 되었다. 그러나 이러한 재료가 갖는 여러 가지 복잡한 물성과 방진요소에 가해지는 큰 변형으로 인한 비선형성 등으로 인하여 유한요소법이나 기타 다른 해석적인 방법으 로 설계단계에서 방진특성과 관련된 강성을 예측하는 것이 어려웠기 때문에 이미 제조되어 있는 여러 가지의 방진요소 중 최선의 것을 택하거나 시행착오(trial and error)적인 방법으로 설계. 제작을 개선하여 왔다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.250-250
• /
• 2022

호안은 유수로부터 제방과 하안을 보호하는 구조물로 태풍 또는 집중호우로 인한 홍수로부터의 안정성이 확보되어야 한다. 일반적으로 호안공법은 강성호안과 연성호안으로 구분되는데 호안재료로써의 기준과 설치 및 유지상태 기준에 따라 다르게 해석되고 있는 것이 현실이다. 최근에는 호안공법의 재료의 연결성에 따라 강성호안과 연성호안을 구분짓는다고 언급되기도 한다. 본 연구에서는 친환경 석재를 사용하고 재료와 기반재의 체결을 통해 연결성을 확보하고 굴요성을 갖게 하는 연성호안공법에 대해 실규모 실험을 계획하였다. 수리 안정성 검토를 위한 실규모 실험은 안동 하천실험센터에서 수행하였다. 실험에 사용된 수로는 8°의 경사를 갖는 급경사수로에서 수행하였으며, 수로의 제원은 폭 3m, 길이 30m 의 직사각형 형태의 직선수로로 이루어져 있다. 시험체는 실규모로 제작되며 실험수로 내 2m × 10m 의 제원을 갖는 공간에 제작된 호안공을 크레인을 이용하여 실험수로에 설치하였다. 수리 안정성 실험은 실험대상유량을 단계별로 나누어 점차적으로 증가시키고, 시험체의 이탈, 파괴 등의 큰 변화가 발생(미국 재료시험학회 연결형 콘크리트 블록 시험방법, ASTM D 7277)하였을 경우 실험을 종료하도록 계획하였다. 수리량 측정항목은 유속, 수위 등이 있으며, 호안공 의 물리적 변화는 3D스캐너를 이용하여 설치 전·후 변위를 검토하였다. 총 3회에 걸쳐 실험을 수행하였으며 실험조건에 따라 일부 시험체에서 돌출 또는 침하현상이 발생하기도 하였으나 호안의 손상이나 이탈, 연성기반재의 찢어짐 등 안정정을 저해하는 호안공 시험체의 변화는 발생하지 않는 것으로 확인되었다. 실험결과 실험수로에서 발생가능한 최대유량인 4.6cms 조건에서 본 호안공법은 약 337.7N/m² 의 소류력을 확보하는 것으로 확인되었다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.1
• /
• pp.133-142
• /
• 2013

The shear wall system with coupling beams has been known as an effective means for moderate and high rise buildings up to 40 stories, because this structural system can provide the enhanced lateral stiffness compared to individual shear walls. Typical reinforced concrete coupling beams have difficulties in construction due to complicated reinforcing work on site, and steel coupling beams also have disadvantages in economical point of view because of a large number of stiffeners required for its stability under lateral loading. To overcome these disadvantages in existing coupling beam systems, this study developed the prestressed composite coupling beam with discontinuous webs, which have improved constructability, economic feasibility, and reduced sectional size. The reversed cyclic loading test on two prestressed composite coupling beams with discontinuous webs having different shear reinforcement ratios have been conducted to investigate their structural performances, and test results showed that the proposed composite coupling beams had good seismic performances.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.2
• /
• pp.95-102
• /
• 2012

In this study, practical verifications for an advanced C.I.P(Cast in Place Pile) construction method were carried out. The structural characteristics of the method is to attach an angular joint in the steel-casing. This joint plays an important role in boring vertically, connected pile to pile, and protects the permeation of the ground water. For verifications, experimental research and numerical analysis were performed. In the experimental research, two model-tests were set up with the real scale steel-casing. One is to examine the leakage in the joint of piles and the other is to compare earth pressures in the front and the joint, respectively. In addition, 3 point bending test and compressive loading test were carried out and numerical analysis was performed to simulate the loading test. As a result of model-tests, the leakage in the pile joints was not shown up to 300 KPa of water pressure and stress concentration in the joint is out of the question. From the results of bending and compressive test, it was found that the new advanced C.I.P method is more convenient and superior than the conventional method.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.594-596
• /
• 1998

지금까지 적합성운용시험이란 용어는 서로 다른 유형의 광의 적합성시험을 구별없이 일컫는 방법으로 사용되어왔으며, 상호운용시험이란 용어도 다양한 가능한 시험구조레 대하여 무차별적으로 사용되어왔다. 본 연구는 적합성시험을 접속적합성시험과 개체적합성시험으로 구분하여, 상호운용성시험구조의 시험능력이 달라짐에 따라 상호운용성시험이 이들 적합성시험과 어떻게 연결 지워질 수 있는지를 탐구한다.

• Electronics and Telecommunications Trends
• /
• v.28 no.2
• /
• pp.70-76
• /
• 2013

인체통신 기술은 유선통신 기술에서와 같이 기기들 간의 연결을 위한 다양한 형태의 케이블이 필요하지 않으므로 기존 유선통신 기술에 비해 편리한 우월성을 가진다. 그렇지만 보안성과 신뢰성은 유선통신의 장점을 넘을 수는 없을 것이다. 무선통신 기술은 초기 네트워크를 구성하기 위하여 서로 복잡하게 주고 받는 절차단계가 필요한 반면, 인체통신 기술은 사용자의 간단한 접촉만으로 통신이 서로 이루어지기 때문에 보다 더 간편하게 연결되며, 사용자 중심의 서비스를 용이하게 제공할 수 있다. 본고는 최근의 인체통신 기술의 기술 동향과 시장 전망 및 표준화 동향을 살펴보고자 한다.