• Korean Journal of Agricultural and Forest Meteorology
• /
• v.9 no.2
• /
• pp.75-87
• /
• 2007

Groundwater recharge rates were estimated and compared in a headwater catchment at the Gwangneung Supersite using three different methods: water-table fluctuation (WTF), mass balance, and hydrograph separation techniques. Data were obtained during the rainy season from June to September 2005. Two different WTF methods estimated the groundwater recharge rate as 25.9% and 23.6%. The mass balance calculation of chloride ions indicated recharge rates of 13.4% on average. Baseflow separation using chloride ion as a tracer from six storm hydrographs produced a 14.0% net baseflow rate on average. Because of the implicit assumption of a long-term steady state without storage change, recharge rates calculated by mass balance and hydrograph separation were smaller than those done with WTF methods, which include the amount of increased storage due to the water-level rise. Subsequently, the WTF method is superior to others in the estimation of groundwater recharge rate to comprehend the dynamic characteristics of the hydrologic cycle.

• Journal of Korean Society for Geospatial Information Science
• /
• v.8 no.2 s.16
• /
• pp.11-22
• /
• 2000

It needs to extract the accurate topological characteristics and hydrological parameters of watershed in order to manage water resource efficiently. But, these data are processed yet by manual wok and simple operation in hydrologic fields. In this paper, we presented algorithm that could extract topological characteristics and hydrological parameters over watershed using GSIS and it gives the saving of data processing tin and the confidency of data. We presented coupling method between GSIS and hydrologic model by using extracted parameters into the input parameter of HEC-HMS hydrologic model. The extraction procedure of topological characteristics and hydrological parameters is as below. First, watershed and stream are extracted by DEM and curve unmber is extracted throughout the overlay of landuse map and soil map. Also, we extracted surface parameters like the length of the longest flow path and the slope of the longest flow path by Grid computation into watershed and stream. And we gave the method that could extract hydrologic parameters like Muskingum K and sub-basin lag tin by executing computation into surface parameters and average Sn curve number being extracted.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.200-200
• /
• 2021

하천은 용수공급, 관개, 친수활동, 산업활동 등 인간의 활동에 중요한 역할을 한다. 이에 따라 수질관리는 필수적이며 유기물, 중금속, 화학물질 등의 용존물질들은 수질문제에 직접적으로 영향을 미친다. 따라서 하천에서의 용존물질의 혼합 거동을 파악하기 위한 연구가 지난 수십년간 이루어지고 있다. 하천 흐름에 따른 오염물질의 이동 및 확산 거동을 예측하기 위하여 1차원 추적모형이 활용되는데, 그 중 하천저장대 모형(Transient Storage Model, TSM)은 자연하천의 복잡하고 불규칙한 수리·지형적인 특성을 단순하게 반영할 수 있다는 장점때문에 가장 많이 사용된다. 하지만 TSM은 매개변수에 대한 의존성과 불확도가 크며, TSM의 저장대에서의 농도분포에 대한 지수함수형태의 모델링이 하상간극수역(Hyporheic zone)에서의 저장대 특성을 반영하기에 구조적으로 부정확하다는 단점이 제기되고 있다. 최근 이러한 TSM의 단점을 보완하고 하천에서의 저장대 메커니즘을 보다 정확하게 구현하고자 체류시간분포(residence time distribution)를 이용한 확률론적 저장대 모델링 프레임워크가 등장하고 있다. 본 연구에서는 본류대와 저장대에서의 오염물질의 체류시간분포를 분리하여 해석하고 이를 전달함수(transfer function)를 이용한 합성곱으로 결합한 형태의 프레임워크를 적용하여 모델링하였다. 상기의 모형을 검증하기 위하여 2019년 감천의 4.85km 구간에서 추적자 실험을 실시하였다. 실험 당시 유량은 12.9 m³/s로 풍수기에 해당되며 평균 유속은 약 0.6 m/s로 측정되었다. 모형의 매개변수는 추적자 실험으로부터 최적화 기법을 통해 역모델링기법으로 결정하였다. 제안된 모형에 의한 모의 결과를 추적자 실험에서의 농도측정자료와 비교한 결과, 평균 0.988의 결정계수를 보여 매우 높은 정확도를 보이고 있음을 알 수 있었다. 저장대특성을 나타내는 농도곡선의 꼬리부에 대하여 같은 조건에서 1차원 이송-분산(ADE) 모형, TSM의 모의결과와도 비교한 결과 본 모형은 추적자 실험 농도측정 결과와 평균 0.195의 오차율을 보이며, 이는 ADE 모형과 TSM의 오차율인 14.03과 1.866에 비해 매우 정확한 것으로 나타났다.

• Journal of Broadcast Engineering
• /
• v.7 no.1
• /
• pp.45-54
• /
• 2002

This paper proposes a video compression algorithm using characteristics of wavelet coefficients. The proposed algorithm can provide lowed bit rate and faster running time while guaranteeing the reconstructed image qualify by the human virtual system. In this approach, each video sequence is decomposed into a pyramid structure of subimages with various resolution to use multiresolution capability of discrete wavelet transform. Then similarities between two neighboring frames are obtained from a low-frequency subband which Includes an important information of an image and motion informations are extracted from the similarity criteria. Four legion selection filters are designed according to the similarity criteria and compression processes are carried out by encoding the coefficients In preservation legions and replacement regions of high-frequency subbands. Region selection filters classify the high-frequency subbands Into preservation regions and replacement regions based on the similarity criteria and the coefficients In replacement regions are replaced by that of a reference frame or reduced to zero according to block-based similarities between a reference frame and successive frames. Encoding is carried out by quantizing and arithmetic encoding the wavelet coefficients in preservation regions and replacement regions separately. A reference frame is updated at the bottom point If the curve of similarity rates looks like concave pattern. Simulation results show that the proposed algorithm provides high compression ratio with proper Image quality. It also outperforms the previous Milton's algorithm in an Image quality, compression ratio and running time, leading to compression ratio less than 0.2bpp. PSNR of 32 dB and running tome of 10ms for a standard video image of size 352${\times}$240 pixels.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.1
• /
• pp.157-170
• /
• 2013

In this study, flood runoff characteristics is analyzed according to subbasin divisions by physically based rainfall-runoff model and appropriate number of subbasin divisions is suggested for midsize test basins. The Clark method, a lumped model in HEC-HMS, and the ModClark method, a semi-distributed model are used to simulate rainfall-runoff processes on Andong-reservoir basin, Imha-reservoir basin, and Pyeongchang river basin. The test basins were divided into nine subdivision cases by equal-area subdivision method such as single basin, 3, 5, 6, 7, 9, 10, 12, and 15 subbasins, and compared the simulated and observed values in terms of the peak flow and the peak time. The simulation results indicated that the peak flows tended to increase and the peak time shifted earlier as the number of subdivisions increased and this tendency weakened after the certain number of subdivisions. In this research, the specific number of subdivision was defined as the minimum number of subdivision considering both peak flow and peak time. Consequently, the minimum number of subdivisions is determined as 5 for Andong and Imha reservoir basins and 7 for Pyeongchang river basin.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3A
• /
• pp.317-328
• /
• 2010

The method to evaluate the flexural capacity of steel fiber-reinforced ultra high strength concrete beams was proposed in this study. An experimental program was set up and fourteen beams have been tested. Test results were compared with predictions by design code and by the proposed method, respectively. It was found that predictions by using ACI 544 Committee recommendations considerably underestimate the flexural capacity. Underestimation of flexural capacity resulted from that of tensile stress block. Three-point bending test data of notched prism specimens and their inverse analysis results were incorporated into modeling of tension stress block. The ratio of the predicted to the experimental flexural capacity was in the range of 0.98 to 1.14. The present study represents that the proposed method allows more realistic prediction of flexural capacity of steel fiber-reinforced ultra high strength concrete beams.

• Geotechnical Engineering
• /
• v.2 no.2
• /
• pp.17-28
• /
• 1986

This study was intended to investigate the consolidation characteristics of lowly organic soils and highly organic ones, with organic content 15 of and 68 % respectively. which were sampled from three different soil regions in Chonbuk province. The results were obtained partly from standard consolidation test but mostly from single increment consolidation test in which each sample was held under the first sustained load for weeks. Highly organic soils retained considerably larger void ratio than lowly organic ones. Decrease of void ratio due to load increment was gradual in lowly organic soils and abrupt in highly organic ones. The long-term compression quantity of the highly organic soils became linearly proportional to the logarithm of time after 5 minutes. The lowly organic soils showed a compression pattern similar to that of clay. For highly organic soils, the secondary consolidation coefficient appeared to have a constant relationship with the logarithm of consolidation time, and therefore may be used as a significant factor in estimating the long-term settlement.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.835-846
• /
• 1999

In this experiment I have made FM-DS/SS system replacing 170.120 MHz by utilizing FM transmitter and receiver. In the transmitter, the result shows that the modulated FM-DS/SS signal is a typical $(sin \chi/\chi)^2$ spectrum by using the clock(1.329 MHz) of PN divided from FM carrier. In the receiver, SO(Synchronous Oscillator) was applied to despread. Like figure 1, 2, and 4 when I applied SO, which consists of sliding correlator, to synchronous a favorable properties could be obtained in the receiver of FM-DS/SS system. In this paper, I used SO in order to take synchronous in the construction of FM-DS/SS system, and to support it I presented the result of the experiment on synchronous curve and properties of OS.

• Journal of the Korean Geosynthetics Society
• /
• v.8 no.3
• /
• pp.25-34
• /
• 2009

Determination of design parameters of composite ground including colluvial soil layer is far difficult because the maximum particle size of such a soil is remarkably large and particle distribution may vary from area to area. The stress-strain behavior of colluvial soils is in fact dependent upon the engineering characteristics at the boundary between coarse and fine materials. However, strength parameters are in general determined based on the characteristics of fine material, which causes an underestimation of such parameters. In this study, strength parameters of colluvial soil are evaluated by means of BIMROCK model curve. In addition, limit equilibrium analysis is carried out to verify the rational shear strength evaluation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.5
• /
• pp.22-29
• /
• 2015

Modern structures is the tendency of being increasingly taller and larger. The concrete with large weight has the disadvantage of increasing the weight on the structure. therefore, the method of carrying out the weight saving of the concrete is required. one of such method is to use a lightweight aggregate. However, studies on structural lightweight concrete, lacking for the recognition of the lightweight concrete, so also is lacking. therefore it is necessary to study on the physical characteristic value of the lightweight concrete. In this study, in order to investigate the tensile properties of lightweight concrete, Crack mouth opening displacement (CMOD) experiments were carried out. the fracture energy of the lightweight concrete subjected to inverse analysis were derived from the CMOD experimental results.