• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.3 s.246
• /
• pp.270-277
• /
• 2006

Inverse radiation problems were solved for estimating boundary temperature distribution in a way of function estimation approach in an axisymmetric absorbing, emitting and scattering medium, given the measured radiative data. In order to reduce the computational time fur the calculation of sensitivity matrix, automatic differentiation and Broyden combined method were adopted, and their computational precision and efficiency were compared with the result obtained by finite difference approximation.. In inverse analysis, the effects of the precision of sensitivity matrix, the number of measurement points and measurement error on the estimation accuracy had been inspected using quasi-Newton method as an inverse method. Inverse solutions were validated with the result acquired by additional inverse methods of conjugate-gradient method or Levenberg-Marquardt method.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.258-260
• /
• 2011

이 논문에서는 쿼리-바이-싱잉/허밍 (Query-by-singing/humming, QbSH) 시스템 또는 커버 노래 인식 (cover song identification) 시스템에서 사용 가능한 멜로디 유사도를 제안한다. QbSH 또는 커버 노래 인식은 디지털 음악의 사용이 보편화되면서 음악 검색의 방법으로 많은 연구가 진행되어 오고 있다. 멜로디 유사도는 이런 시스템을 구현하는데 필수적인 요소이며, 두 개의 음악에서 멜로디가 추출되었다고 가정하고, 추출된 멜로디 사이의 유사한 정도를 수치로 표현한다. QbSh 시스템이나 커버 노래 인식 시스템은 멜로디 유사도에 기반하여 입력 노래와 유사한 노래를 데이터베이스에서 검색하는 작업을 수행한다. 이 논문에서 제안하는 멜로디 유사도 방식은 기존의 많이 연구되던 동적 시간 왜곡 (dynamic time warping, DTW) 방법과 크로마 표현 방법 (chroma representation)을 사용하였다. DTW방법은 비대칭적으로 사용하고 미디 노트 영역에서 표현된 멜로디 특징은 0이상 12 미만의 크로마 레벨로 표현하였다. 기존의 방법에서는 정수값을 많이 사용하였으나 이 논문에서는 실수값을 사용한다. DTW 에 사용하는 거리 함수를 기존에 사용하던 차이의 절대값 대신 꺾인 함수 형태를 사용함으로써 성능을 높였다. QbSH 시스템에서의 실험을 통해서 성능을 검증하였다. 본 논문에서는 10-12초 길이의 1000번의 쿼리(Query)에 대해서 28시간 정도의 데이터베이스에서 실험한 결과, 순위 역의 평균 (Mean reciprocal rank, MRR) 값이 0.713을 보였다.

• Journal of Satellite, Information and Communications
• /
• v.12 no.1
• /
• pp.1-5
• /
• 2017

In this paper, multiuser detector (MUD) based on radial basis function (RBF) is proposed and simulated for a multicode direct sequence/code division multiple access (DS/CDMA) system in a multipath fading channel. The performance of RBF-based MUD is compared with that of many suboptimal multiuser detectors in terms of bit error probability. From the simulation results, it is confirmed that the RBF-based MUD outperforms decorrelating detector, and achieves near-optimum performance under various environments. The results in this paper can be applied to design of MUD for a multicode DS/CDMA system.

• Korean Journal of Optics and Photonics
• /
• v.10 no.6
• /
• pp.448-452
• /
• 1999

The Gaussian impulse fUllction initially assumed in the inverse problem is $e^{-\sigma^2\chi^2}$. The modified Gaussian amplitude pupil function $e^{\frac-{\omega^2}{4\sigma^2}$ is obtained by the inverse Fourier transform of $e^{-\sigma^2\chi^2}$. A Gaussian amplitude modulation plate (GAMP) is designed and fabricated by using absorption and transparence glass which are the same refractive index. It is compared the experimental transmittance with theoretical that of GAMP. It is found that the linewidth of Gaussian optical imaging system obtained by wavelength is $0.365{\mu}m$ and NA is 0.07 is decrease 2/3 than that of Rayleigh.

• Journal of the Korea Convergence Society
• /
• v.6 no.5
• /
• pp.9-14
• /
• 2015

In this paper, we analysis the electromagnetic scattering of an arbitrary shape dielectric cube subjected to plane wave incidence in three dimensions. MoM(Method of Moments)in which a surface of a body is divided with small triangular patches and equivalence principle are used to fuse the PMCHW(Poggio, Miller, Chang, Harrington, and Wu) Integral Equations with respect to equivalent currents on a dielectric body. Triangular patch and loop-patch basis functions that is robust in wide frequency ranges are used for MoM formulations. Proposed method is very useful to analysis the induced current of arbitrary dielectric bodies and numerical results for a dielectric cube are presented.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.2
• /
• pp.86-92
• /
• 2001

Various array processing techniques to identify the noise source position or bearing have been developed. Typical array processing techniques which are based on time delay between received signals at two sensors, are classified as conventional beamforming, correlation function and NAH (Near-Field Acoustic Holography) techniques which have their own characteristics with respect to application field and signal processing method. In this study, correlation function technique which could be applied for broadband noise source detection, is adopted and the effective detection technique is proposed considering the effects of source bandwidth and measurement noise correlation of noise sources. The validity of the Proposed technique is evaluated using the 3-dimensional nonlinear any which does not give 3-dimensional Position or bearing ambiguity

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.310-319
• /
• 2017

This paper introduces the method how to measure the thrust in impulse facility. In a Facility having such a short duration time of steady flow, there's no time to reach a steady state of the forces acting on model so that the test model vibrates until the end of the flow. The forces exerted on an engine exist with vibration so that the usual force balance can not be used. SWFB(Stress Wave Force Balance) technique is utilized in a shock tunnel to get the thrust. As an example, a model force balance has been calculated its strain against impulse force by using FEM(Finite Element Method). A transfer function between the impulse force and strain has been obtained by the way of de-convolution.

• Journal of Korea Water Resources Association
• /
• v.39 no.5 s.166
• /
• pp.417-430
• /
• 2006

In this study, the probability density functions (PDFs) of the rainfall generated by PRPM(Poisson Rectangular Pulse Model) and the runoff simulated by SLRM(Single Linear Reservoir Model) and Nash model, were compared to find out the changes of runoff characteristics due to the change of rainfall characteristics. Effect of rainfall frequency, Intensity, and duration on runoff were evaluated using the PDFs derived. Two basin, small and midium-sized ones, were also selected to find out the effect of basin size. As the results, we found that the arrival time, the intensity, and the duration of rainfall differently influence the runoff characteristics, which could be applied to evaluate the effect of climate change.

• Journal of Korea Water Resources Association
• /
• v.40 no.11
• /
• pp.899-908
• /
• 2007

In this study, wave reflection due to depression of seabed is calculated by using eigenfunction expansion method. The proper numbers of steps and evanescent modes needed for analysis are suggested by applying the eigenfunction expansion method to bottom topography of which slope or curvature varies. While satisfying shallow or intermediate water depth condition, the optimal figure of depression of seabed is obtained by calculating reflection coefficient for various depressions of seabed. The reflection coefficient with distance between the depression of seabeds is then calculated after arraying the optimal geometry in two and three rows.

• The Mathematical Education
• /
• v.57 no.4
• /
• pp.477-491
• /
• 2018

In this paper we study in-service teachers' and pre-service teachers' recognition the domain in the problem concerning the continuity of a function. By a questionnaire survey we find out that most of in-service teachers and pre-service teachers are understanding the continuity of a function as explained in high school mathematics textbook, in which the continuity was defined by and focused on comparing the limit with the value of the function. We also notice that this kind of definition for the continuity of a function makes them trouble to figure out whether a function is continuous at an isolated point, and to determine that a given function is continuous on a region by not considering its domain explicitly. Based on these results we made several suggestions to improve for in-service teachers and pre-service teachers to understand the continuity of a function more exactly, including an introduction of a more formal words usage such as 'continuous on a region' in high school classroom.