• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.393-396
• /
• 2008

The purpose of this paper is to find out quantitatively the relationship between the surface shape and the mechanical properties of corroded reinforcement. Three-dimensional measurements were carried out on the surface shape of variously corroded reinforcements and parameters expressing the characteristics of the shape, which included the maximum decrement of sectional area of reinforcement, its distribution along the axis. It was investigated that which parameters could correspond to the mechanical properties of corroded reinforcement and it was confirmed that the maximum decrement of sectional area of reinforcement could express the mechanical properties most appropriately. Finally, this paper proposes a constitutive model of corroded reinforcement for analyzing the structural behavior of reinforced concrete structures considering the localized corrosion of by finite element method.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.360-364
• /
• 1998

지금까지, 천의 주관적인 태평가는 역학적인 특성에 의하여 결정된다고 연구되고 있다. 특히 KES-FB 시스템은 천의 역학적인 특성을 통계학적인 방법으로 객관화한 소프트웨어이다[1], 대체적으로 직물에 비해 편성물은 측정의 어려옴, 지역적인 기후특성, 문화적인 차이 때문에 태를 평가하는데 적용하기 난해한 면이 있다[2]. 종합적인 태는 천의 사용 용도와 사람의 정신적인 특성에 대한 반영이 개입되어야 하므로 적용하기에 곤란하지만, 최근에 응용되고 있는 퍼지이론과 신경망이론을 통하여 전체적인 태평가가 가능하리라 본다. (중략)

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6C
• /
• pp.275-284
• /
• 2012

The Antarctic continent exposed to strong wind, very low temperature, and extremely dry condition. The freezing-thawing cycles under this extreme environment change the mechanical characteristics of rocks near the ground surface. To investigate the effect of freezing-thawing cycles under the extreme environment understand on geotechnical properties of rocks, rocks from the Antarctica were collected from two places: (1) West Antarctic Cape Burks and (2) East Antarctic Terra Nova Bay areas. The rock characteristics of these two areas were described and compared. For Terra Nova Bay area, rock characteristics of rocks near the surface and depths exceeding 2.9 m were examined. The 'near-the-surface rocks' averages of absorption rate, P-wave velocity, and unconfined compressive strength were 0.56%, 3,717 m/s, and 109MPa, respectively; while, those values of 'deep-sited rocks' were 0.24%, 4,670 m/s, and 88MPa. From the measurements, it was found that the effects of weathering were not significant on mechanical characteristics (strength) but were pronounced on physical characteristics(absorption and P-wave velocity).

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2007.05a
• /
• pp.48-50
• /
• 2007

본 연구에서는 기능성 의류소재로서 나노캡슐화 상전이 물질 처리 직물의 적합성을 평가를 위한 기초자료를 제시하고자 직물의 역학적 특성과 촉감 감성과의 관계에 대해 분석하였다. 분석결과, 면직물과 폴리에스테르직물에 모두 영향을 미치는 요인으로는 최대 하중시의 신장성, 전단강성, 표면마찰계수, 인장선형성, 두께 총 5가지로 나타났다. 이를 바탕으로 역학적 특성이 면직물과 폴리에스테르직물의 촉감 감성을 예측할 수 있는지 확인하기 위한 회귀분석 결과 두 직물 모두 R2가 0.7이상으로 예측력이 높게 나타난 것을 확인할 수 있었다.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.11
• /
• pp.39-49
• /
• 2014

Volcanic rocks in Jeju island show vesicular structure caused by various environmental factors, and indicate the differences in geological and mechanical characteristics from region to region. Previous studies on the volcanic rocks in Jeju island have been actively conducted on geological and chemical properties in terms of geophysics and geology and on physical and mechanical properties in terms of engineering. But comprehensive comparative analysis on physical and mechanical properties of volcanic rocks in Jeju island is not conducted. In this study, the physical and mechanical properties of volcanic rocks in Jeju island were compared and analyzed comprehensively through the existing research papers and reports about volcanic rocks in Jeju island. As a result, it was found that the relationship between absorption (porosity) and apparent specific gravity is commonly linear and could be represented as two different linear approximations. In addition, it was found that the relationship between P-wave velocity and S-wave velocity and the relationship between absorption (porosity) and uniaxial compressive strength could be classified more clearly, considering two different linear relationships in absorption (porosity) and apparent specific gravity.

• The Korea Swine Journal
• /
• v.6 no.10 s.62
• /
• pp.30-37
• /
• 1984

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.35-36
• /
• 2013

본 발표는 atomic force microscopy (원자력현미경) 기법을 이용하여 그래핀을 포함한 다양한 나노물질의 물리적, 화학적, 역학적, 또한 전기적 특성의 상호영향 (correlation)의 이해를 목표로 한다. 원자력 현미경은 표면과 검침사이의 물리적 힘을 측정하고 이를 피드백시킴으로써 표면의 형상을 얻는 원리이며 표면의 역학적 (마찰력, 점착력), 전기수송적 특성을 동시에 측정할 수 있는 이점이 있다. 또한 원자력 현미경은 표면의 구조적인 특성과 표면에너지에 대한 정보를 나노미터 스케일에서 줄 수 있다. 나노선, 나노입자, 또한 연료전지의 모델 시스템에서 원자력현미경을 이용한 표면의 나노역학적 특성 및 점착력의 측정이 다루어질 것이며 표면공학을 통한 표면처리에 따른 마찰력과 점착력의 제어를 논의할 것이다.

• Tunnel and Underground Space
• /
• v.29 no.1
• /
• pp.12-29
• /
• 2019

Permeability and its change due to a fluid injection in jointed rock mass is an important factor to be well identified for a safe and successful implementation of Carbon Capture and Sequestration (CCS), Enhanced Geothermal System (EGS) and Enhanced Oil Recovery (EOR) projects which may accompany injection-induced hydromechanical deformation of the rock mass. In this technical report, we first reviewed important issues in evaluating initial permeability using borehole hydraulic tests and numierical approaches for understanding coupled hydromechanical properties of rock mass. Recent SIMFIP testing device to measure these hydromechanical properties directly through in-situ borehole experiments was also reviewed. The technical significance and usefulness of the device for further applications was discussed as well.

• Journal of the Korean Ceramic Society
• /
• v.38 no.6
• /
• pp.575-581
• /
• 2001

세라믹/금속기지 복합재료에서 횡방향의 단축인장하중을 받는 경우, 복합재료의 특성에 관한 시뮬레이션 결과이다. 세라믹과 금속기지간 계면에 강한 결합이 존재하는 복합재와, 계면에서의 결합이 약한 복합재의 두 경우에 대하여 횡방향 평균응력과 평균변형율에 대한 관계를 계산하였다. 복합재료의 미시역학적개념과 유한요소해석법을 적용하여 세라믹체적분율의 변화에 따라 각기 해석되었다. 본 연구에서 계산된 횡방향 탄성계수는 문헌에 알려져 있는 미시역학개념으로 유도된 식에 의한 횡방향탄성계수값과 잘 일치되었다. 계면에서 강한 결합이 있는 복합재와는 달리, 약한 결합의 복합재는 인장하중에 의하여 세라믹/금속계면에서 금속재료와 세라믹간의 분리가 발생된다. 이 분리는 전체복합재의 강성을 감소시키며, 금속의 부피분율이 감소될수록 (즉, 세라믹의 부피분율이 증가할수록) 횡방향 평균응력의 평균변형율에 대한 감소로 나타났다. 미시역학의 개념을 적용한 유한요소해석기법을 통하여, 이미 알고 있는 복합재 각 성분의 특성으로부터 복합재료의 계면특성과 횡방향특성을 예측할 수 있다.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.7
• /
• pp.41-52
• /
• 2015

Volcanic rocks in Jeju Island have vesicular structure caused by various environmental factors, and indicate the differences in geological and mechanical characteristics from region to region. In addition, the bedrock of Jeju Island shows stratified structure, that is, soft layers composed of pyroclastic rocks or cavities are irregularly developed between the basalt layers by several times of volcanic activity. In this study, various physical tests and unconfined compressive strength test were conducted for intact rocks sampled in northwestern onshore and offshore of Jeju Island. The results obtained in the tests were compared with the physical and mechanical characteristics of intact rocks sampled in southeastern offshore of Jeju Island. As a results, it was confirmed that the physical and mechanical characteristics of basalts sampled in northwestern Jeju Island were similar to those of basalts sampled in southeastern offshore of Jeju Island. In addition, it was possible to estimate approximate design parameters from the correlation of mechanical properties with physical properties of basalts in Jeju Island.