• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.4
• /
• pp.556-562
• /
• 2009

Ectopic eruption of the maxillary first permanent molar means that the molar erupts out of the normal position and is arrested in its eruption by the second primary molar. This local eruption disturbance results in a premature atypical resorption on the distal part of the second primary molar. In most irreversible cases, the second primary molar is lost prematurely, either by spontaneous exfoliation or by extraction, In cases of doubt as to whether the eruption is of the irreversible type or not, careful radiographic observation period for a few months would be valuable in evaluating the possibilities of the tooth's freeing itself. The purpose of this study was to determine the characteristics and occurrence of the ectopic eruption of the maxillary first permanent molar. A descriptive, observational, retrospective study was done using the radiographs of 25 conseutive patients, who were in the first phase of mixed dentition. A method was designed to evaluate the amount of pathologic resorption of the second maxillary primary molar and the mesial angulation of the first permanent molar. The study showed that the most important etiologic factor was the eruption path or mesial angulation of the first permanent molars relative the chosen reference lines.

• Korean Chemical Engineering Research
• /
• v.45 no.5
• /
• pp.500-505
• /
• 2007

The objectives of this research were to (1) identify the membrane fouling potential due to different fractions of NOM (2) correlate the physicochemical properties of NOM and membranes with the adsorption of humic substances on membrane (4) find out the effect of membrane physical and chemical washing according to membrane material. The static adsorption test and adsorption test showed that hydrophobic organics adsorbed much more quickly than hydrophilic organics. In case of the effect of membrane properties on the adsorption of organic fractions, the adsorption rate ratio(a) of hydrophobic membrane (0.016, 0.077) was greater than that of hydrophilic membrane (0.010, 0.033) regardless of the kind of organic fractions. This suggests that the UF membrane fouling were occurred mainly by internal pore size decreasing due to adsorption of organic into pore surface for hydrophobic membrane, and by sieving of organics and forming a gel layer on the membrane surface for hydrophilic membrane. In conclusion, the decrease in the pore volume, which was caused by the organic adsorption into the internal pore, was greater with the hydrophobic membrane than with the hydrophilic membrane. In case of the effect of membrane properties on permeate flux, the rate of flux decline for the hydrophobic membrane was significantly greater than that for the hydrophilic membrane.

• Membrane Journal
• /
• v.23 no.1
• /
• pp.12-23
• /
• 2013

On the subject of river bed water in Seomjin river, it had accomplished the verifying experiment of membrane filtration pilot plant for evaluating the applicability of its process throughout the prediction of membrane fouling as a function of the pore size of membrane and the determination of optimum coagulant dosage. On the result of the experiment for the evaluation of the membrane fouling as a function of the pore size, a increasing rate of irreversible resistance of membrane pore size $0.1{\mu}m$ and $0.01{\mu}m$ was measured each $0.44{\times}10^{12}/m^2$ and $0.42{\times}10^{12}/m^2$, respectively. And on the result of Flux-test, it showed that the optimum coagulant dosage was measured lower than the it of the Jar-test. The result to be operated in a condition of a permeate flux $1.0{\sim}1.5m^3/m^2{\cdot}day$ without coagulation and a permeate flux $1.0{\sim}2.0m^3/m^2{\cdot}day$ with coagulation was maintained at stable trans-membrane pressure (TMP) value for 6 months up to. Therefore it showed that the stable operation without the coagulation was possible on permeate flux $1.0{\sim}1.5m^3/m^2{\cdot}day$ in the operation of membrane filtration process.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.14 no.2
• /
• pp.123-134
• /
• 2014

Recent advances in the diagnosis and treatment of inborn errors of metabolism (IEM) have improved substantially the prognosis of many of these diseases, if diagnosed early enough before irreversible damage occurs. Diseases of inborn errors of metabolism are so diverse over several hundred disease up to now and may be several thousand in near future, and these diversities of IEMs make clinicians embarassed. The signs of neurological dysfunctions of many IEMs manifesting in the neonatal period is very nonspecific, such as poor feeding, poor sucking, apnea or tachypnea, vomiting, hypertonia, hypotonia, seizure, letharginess, consciousness change and coma. But after neonatal period, the signs of neurological deficits become specific and localized. The results of routine basal laboratory tests such as metabolic acidosis, hyperammonemia, lactic acidemia, ketonemia or hyperuricemia can give very important clinical clues for the diagnosis of IEMs. Even no abnormal findings on routine laboratory test could be very important clue for NKH, sulfite oxidase deficiency and peroxisomal disorders. These various clinical manifestations of these diverse diseases can be categorized and summarized. This makes it essential that the practicing clinicians be familiar with the clinical presentations and symptomatic and systematic approaches of these disorders. Characteristic clinical presentations, methods of symptomatic and systematic approach and typing of various disorders is discussed in this review.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.73-79
• /
• 2017

Maleic anhydride (MAH) grafted polypropylene (PP-g-MAH) copolymers were prepared by changing MAH and styrene monomer (SM) content, using a twin screw extruder at $190^{\circ}C$. The grafting degree was measured by non-aqueous back titration method. The grafting degree of PP-g-MAH-SM copolymer was higher than that of PP-g-MAH at the same MAH content. PP-g-MAH-SM/kenaf fiber (KF) composites were also prepared by using a PP-g-MAH as a matrix at $200^{\circ}C$ and the KF content was fixed at 20 wt%. Based on the degradation temperature investigated by TGA, the thermal stability of PP-g-MAH-SM/KF composites was more enhanced than that of PP-g-MAH only. Mechanical properties of the composites were also improved when MAH and SM applied together. The adhesion degree between the copolymer and KF was confirmed by both SEM pictures of the fractured surface and contact angles.

• Journal of Plant Biology
• /
• v.35 no.3
• /
• pp.247-252
• /
• 1992

The effect of iso-butanol on the electron transport rate of PS I and PS II was investigated in isolated spinach chloroplasts. In photosystem I, the rate of electron transport increased in the presence of 1 to 4% of isobutanol but decreased in 5 to 9% of iso-butanol. But in photosystem II, the rate of electron transport decreased when treated with 0.2 to 1% of iso-butanol. The inhibitory effect of isomers of butanol on PS II electron transport rate increased in the order of 2-butanol, tert-butanol, iso-butanol and I-butanol. This means that PS II activity was affected according to the arrangement of carbon atoms in butanol. The inhibitory effect of iso-butanol reduced when DPC was added in the solution. This means that iso-butanol affects PS II reduction side of thylakoid membrane primarily. The inhibitory effect of iso-butanol was reduced when $Mn^{2+},\;C^{2+}$ or BSA were added in the solution. PS II activity was restored when 1% iso-butanol treated chloroplast solution was diluted to twentyfold or when $Mn^{2+},\;C^{2+}$ or BSA was added to the diluted solution. However, the SDS-PAGE banding pattern of thylakoid membrane proteins was similar even in 2% iso-butanol treated chloroplasts and the control ones. Only in 5% iso-butanol treated chloroplasts these bands were very weak. These observations suggest that low concentrations of iso-butanol releases manganese and calcium ions from chloroplasts and inhibits the electron transport system. This inhibitory effect can be reversible in low concenterations but in high concentrations the inhibitory effect of iso-butanol become irreversible.rsible.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.73-73
• /
• 2000

안티퓨즈 소자는 프로그램 가능한 절연층의 상하 각각에 금속층이나 다결정 실리콘 등의 전도 가능한 전극으로 구성된다. 프로그램은 상하 전극간에 임계전압을 가했을 때 일어나게 되며 이때 절연층이 파괴되므로 비가역적이어서 재사용은 불가능하게 된다. 안티퓨즈 소자는 이러한 프로그램 특성으로 인하여 메모리 소자를 이용한 스위치 보다 속도나 집적도 면에서 우수하다. FPGAsdp 사용되는 안티퓨즈 소자는 집적도의 향상과 적정 절열파괴전압 구현을 위해 절연막의 두께를 감소시키는 것이 바람직하다. 그러나 두께나 감소될 경우 바닥전극의 hillock에 큰 영향을 받게 되며, 그로 인해 절연막의 두께를 감소시키는 것는 한계가 있는 것으로 보고되어 있다. 본 논문에서는 낮은 구동 전압에서 동작하고 안정된 on/pff 상태를 갖는 Al/TiO2-SiO2/Mo 형태의 안티퓨즈 소자를 제안하였다. 만들어진 antifuse cell은 0.6cm2 크기로 약 300개의 샘플을 제작하여 측정하였다. 비저항이 6-9 $\Omega$-cm인 P형의 실리콘 웨이퍼에 RF 마그네트론 스퍼터링(RF magnetron sputtering) 방법으로 하부전극인 Mo를 3000 증착하였다. SiO2는 안티퓨즈에서 완충막의 역할을 하며 구조적으로 antifuse cell을 완전히 감싸고 있는 형태로 제작되었다. 완충막 구조를 만들기 dln해 일반적인 포토리소그라피(Photo-lithography)작업을 거처 형성하였다. 형성된 hole의 크기는 5$mu extrm{m}$$\times$5$\mu\textrm{m}$ 이었다. 완충막이 형성된 기판위에 안티퓨즈 절연체인 SiO2를 PECVD 방식으로 100 증착하였다. 그 후 이중 절연막을 형성시키기 위해 LPCVD를 이용하여 TiO2를 150 증착시켰다. 상부 전극은 thermal evaporation 방식으로 Al을 250nm 증착하여Tejk. 하부전극으로 사용된 Mo 금속은 표면상태가 부드럽고 녹는점이 높은 매우 안정된 금속으로, 표면위에 제조된 SiO2의 특성을 매우 안정되게 유지시켰다. 제안된 안티푸즈는 이중절연막을 증착함으로서 전체적인 절연막의 두께를 증가시켜 바닥전극의 hillock의 영향을 적게 받아 안정성을 유지할 수 있도록 하였다. 또한, 두 절연막 사이의 계면 반응에 의해 SiO2 막을 약화시켜 절연막의 두께가 두꺼워졌음에도 기존의 SiO2 절연막의 절연 파괴 전압 및 누설 전류오 비교되는 특성을 가졌다. 이중막을 구성하고 있는 안티퓨즈의 ON-저항이 단일막과 비교해 비슷한 것을 볼 수 잇는데, 그 이유는 TiO2에 포함된 Ti가 필라멘트에 포함되어 있어 필라멘트의 저항을 감소시켰기 때문으로 사료된다. 결국 이중막을 구성시 ON-저항 증가에 의한 속도 저하 요인은 없다고 할 수 있다. 5V의 절연파괴 시간을 측정한느 TDDB 테스트 결과 1.1$\times$103 year로 기대수치인 수십 년보다 높아 제안된 안티퓨즈의 신뢰성을 확보 할 수 있었다. 제안된 안티퓨즈의 이중 절연막의 두께는 250 이고 프로그래밍 전압은 9.0V이고, 약 65$\Omega$의 on 저항을 얻을수 있었다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.4
• /
• pp.36-47
• /
• 2009

Microbial and related biochemical mass of composts are important for optimization of its process and end-products. This study was carried out to assess the specific microbial and related biochemical mass which could be used as an indicator for compost maturity during composting stages. The samples from five compost plants were collected at three stages (Initial, Thermophilic and Mature) and analyzed for total aerobic bacteria (TAB), Coliforms, Escherichia coli, Actinomycetes and fungi. Significantly, the coliforms and E.coli counts decreased during the thermophilic stage and were completely eliminated during mature stage. However, the other microbial mass were completely eliminated during mature stage. Which disclosed that Coliforms and E.coli communities can be used as compost maturity indicator. Interestingly, the microbial biomass carbon and nitrogen ratio (MBC/MBN) were decreased a little during the thermophilic stage due to the decreasing number of coliforms, Ecoli and fungi, while the ratio increased during the mature stage due to increasing fungal and aerobic bacterial counts. In addition the heavy metals were shown strong negative correlation with Actenomycetes. This study provides insight to the evaluation of compost maturity as well as the quality by the metal-microbial interactions.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.5
• /
• pp.1051-1062
• /
• 1997

Background : In asthma, airway obstruction is usually reversible, either spontaneously or with treatment. However, the responses to treatment are variable and some patients show an irreversible component of airflow obstruction. This may be associated with structural changes in the airway. To assess the relationship between the difference in airway reversibility and structural changes, we evaluated the HRCT findings and pulmonary function test. Methods : We studied 40 asthmatic subjects who had had acute exacerbation of symptoms and had showed normal chest X-ray findings. They had monitered PEFR daily, and had performed PFT and HRCT within three days after initiation of treatment. According to serial PEFR, they were grouped into 3 categories (Group 0 ; initial PEFR was within normal limit, Group 1 ; revealed increment of 30% in PEFR within 3 days after initiation of treatment, Group 2 ; revealed within 2 weeks) and then grouped again into 4 (Group 0, Group 3 ; reached to normal value of PEFR within 3 days after initiation of treatment, Group 4 ; within 2 weeks, Group 5 ; not within 2 weeks). Results : (1) Age in Group 0 was significantly lower than other groups(p<0.05), but there was no significance in other groups. (2) Duration of asthma in Group 2 was significantly longer than Group 0, 1(p<0.05). (3) FVC(%) and FEV1(%) were significantly decreased with delayed response to the treatment (p<0.05). (4) $FEV_1$/FVC(%) in Group 1, 2 were significantly lower than Group 0(p<0.05). $FEV_1$/FVC(%) in Group 5 was significantly lower than Group 0,3,4 (p<0.05). (5) Air trapping was increased significantly with delayed response to the treatment (p<0.05). (6) Mucus impaction in Group 0 was significantly larger than Group 1,2 (p<0.05). $FEV_1$/FVC(%) in Group 0,4,5 were significantly larger than Group 3 (p<0.05). Conclusion : Difference in reversibility of airway obstruction was associated with age, duration of asthma and severity of initial airflow obstruction There was no definite difference in HRCT findings in asthma.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.574-583
• /
• 2021

Waste air containing ethanol (100 ppmv) and hydrogen sulfide (10 ppmv) was continuously treated by waste air-treating system composed of two annular photocatalytic reactors (effective volume: 1.5 L) packed with porous SiO₂ media carrying TiO₂-anatase photocatalyst, one of which was alternately operated for 32 d/run while the other was regenerated by 100 ℃ hot air with 15 W UV(-A)-light on. As its elimination-behavior of ethanol, the removal efficiencies of ethanol at 1^st, 2^nd and 3^rd operation of the photocatalytic reactor system(A), turned out to be ca. 60, 55 and 54%, respectively, at their steady state condition. Unlike the elimination-behavior of ethanol, its hydrogen sulfide-elimination behavior showed repeated decrease of hydrogen sulfide removal efficiency by its resultant arrival at a lower level of steady state condition. Nevertheless, the removal efficiencies of hydrogen sulfide at 1^st, 2^nd and 3^rd operation of the photocatalytic reactor system, turned out to be ca. 80, 75 and 73%, respectively, at their final steady state condition, higher by ca. 20, 20 and 19% than those of ethanol, respectively. Therefore, assuming that adsorption on porous SiO₂-photocatalyst carrier was regarded to belong to a reversible deactivation and that decreased % of removal efficiency due to the reversible deactivation of photocatalyst including the adsorption was independent of the number of its use upon regeneration, the increments of the decreased % of removal efficiency of ethanol and hydrogen sulfide, due to an irreversible deactivation of photocatalyst, for the 3^rd use of regenerated photocatalyst, compared with the 2^nd use of regenerated photocatalyst, were ca. 1 and 2%, respectively, which was insignificant or the less than those of ca. 5 and 5%, respectively, for the 2^nd use of regenerated photocatalyst compared with the 1^st use of virgin photocatalyst. This trend of the photocatalytic reactor system was observed to be similar to that of the other alternately-operating photocatalytic reactor system.