• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.3
• /
• pp.206-213
• /
• 2004

As far as an opening device of fishing gears is concerned, applications of a kite are under development around the world. The typical examples are found in the opening device of the stow net on anchor and the buoyancy material of the trawl. While the stow net on anchor has proved its capability for the past 20 years, the trawl has not been wildly used since it has been first introduced for the commercial use only without sufficient studies and thus has revealed many drawbacks. Therefore, the fundamental hydrodynamics of the kite itself need to ne studied further. Models of plate and canvas kite were deployed in the circulating water tank for the mechanical test. For this situation lift and drag tests were performed considering a change in the shape of objects, which resulted in a different aspect ratio of rectangle and trapezoid. The results obtained from the above approaches are summarized as follows, where aspect ratio, attack angle, lift coefficient and maximum lift coefficient are denoted as A, B, $C_L$ and $C_{Lmax}$ respectively : 1. Given the triangular plate, $C_{Lmax}$ was produced as 1.26${\sim}$1.32 with A${\leq}$1 and 38$^{\circ}$B${\leq}$42$^{\circ}$. And when A${\geq}$1.5 and 20$^{\circ}$${\leq}$B${\leq}$50$^{\circ}$, $C_L$ was around 0.85. Given the inverted triangular plate, $C_{Lmax}$ was 1.46${\sim}$1.56 with A${\leq}$1 and 36$^{\circ}$B${\leq}$38$^{\circ}$. And When A${\geq}$1.5 and 22$^{\circ}$B${\leq}$26$^{\circ}$, $C_{Lmax}$ was 1.05${\sim}$1.21. Given the triangular kite, $C_{Lmax}$ was produced as 1.67${\sim}$1.77 with A${\leq}$1 and 46$^{\circ}$B${\leq}$48$^{\circ}$. And when A${\geq}$1.5 and 20$^{\circ}$B${\leq}$50$^{\circ}$, $C_L$ was around 1.10. Given the inverted triangular kite, $C_{Lmax}$ was 1.44${\sim}$1.68 with A${\leq}$1 and 28$^{\circ}$B${\leq}$32$^{\circ}$. And when A${\geq}$1.5 and 18$^{\circ}$B${\leq}$24$^{\circ}$, $C_{Lmax}$ was 1.03${\sim}$1.18. 2. For a model with A=1/2, an increase in B caused an increase in $C_L$ until $C_L$ has reached the maximum. Then there was a tendency of a very gradual decrease or no change in the value of $C_L$. For a model with A=2/3, the tendency of $C_L$ was similar to the case of a model with A=1/2. For a model with A=1, an increase in B caused an increase in $C_L$ until $C_L$ has reached the maximum. And the tendency of $C_L$ didn't change dramatically. For a model with A=1.5, the tendency of $C_L$ as a function of B was changed very small as 0.75${\sim}$1.22 with 20$^{\circ}$B${\leq}$50$^{\circ}$. For a model with A=2, the tendency of $C_L$ as a function of B was almost the same in the triangular model. There was no considerable change in the models with 20$^{\circ}$B${\leq}$50$^{\circ}$. 3. The inverted model's $C_L$ as a function of increase of B reached the maximum rapidly, then decreased gradually compared to the non-inverted models. Others were decreased dramatically. 4. The action point of dynamic pressure in accordance with the attack angle was close to the rear area of the model with small attack angle, and with large attack angle, the action point was close to the front part of the model. 5. There was camber vertex in the position in which the fluid pressure was generated, and the triangular canvas had large value of camber vertex when the aspect ratio was high, while the inverted triangular canvas was versa. 6. All canvas kite had larger camber ratio when the aspect ratio was high, and the triangular canvas had larger one when the attack angle was high, while the inverted triangluar canvas was versa.

• Fashion & Textile Research Journal
• /
• v.14 no.2
• /
• pp.269-276
• /
• 2012

The aim of this study is to develop clothing size system according to each size interval for obese girls aged 10~12 by classifying the upper bodies. The criteria for subjects in this study were girls who had over 1.46 of the R$\ddot{o}$hrer Index. A total of 229 schoolgirls who met these criteria were enrolled. Results are as follows; 1st, 5 factors were extracted by factor analysis and 3 clusters were categorized by cluster analysis, cylinder-type, inverted triangle-type and inverted trapezoid-type. And 2nd, as a consequence of size system establishment, the basic body sizes and reference body sizes were different according to types even in commonly-appeared size names at sections of respective types. The research findings above suggest that it is necessary to figure out the obesity types according to height and bust girth sizes representing basic sizes and to design the patterns in consideration of the characteristics of obese body shapes. And it may be used as a basic data to decide the desirable output of production according to respective body types.

• Magazine of the Korea Concrete Institute
• /
• v.11 no.1
• /
• pp.255-266
• /
• 1999

The objective of this experiment is to observe the elastic and inelastic behaviors of high-rise reinforced concrete frames having non-seismic details. To do this, a building frame designed according to Korean seismic code and detailed in the Korean conventional practice was selected. A 1:12 scale plane frame model was manufactured according to similitude law. A reversed lateral load test and a monotonic pushover test were performed under the displacement control. To simulate the earthquake effects, the lateral force distribution was maintained to be an inverse triangle by using a whiffle tree. From the tests, base shears, crack pattern, local rotations in the ends of critical members and the relations between interstory drift versus story shear are obtained. Based on test results, conclusions are drawn on the implications of the elastic and inelastic behaviors of a high-rise reinforced concrete frame having non-seismic details.

• The KIPS Transactions:PartB
• /
• v.9B no.5
• /
• pp.681-688
• /
• 2002

This paper proposes a system detecting the area of traffic sign, which uses color rate as the information of colors, and corner point and distance rate as the information of morphology. In this system, a candidate area is extracted by performing dilation operation on the binary image made by the color rate of R, G, B components and by detecting corner point and center point through mask. The area of traffic sign with varied shapes is extracted by calculating the distance rate from center point, which is the information of morphology. The results of this experiment demonstrate that in this system which is invariable regardless of its size and location, it is possible to extract the exact area from varied traffic signs such as the shapes of triangle, circle, inverse triangle, and square as well as from the images at both day and night when brightness value is greatly different. Moreover, it demonstrates great accuracy and speed in processing.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.210-218
• /
• 2019

Recently, cable-stayed bridges have been attempting to apply bold and experimental shapes for aesthetic and originality. In the case of bridges that have no similar cases, deep understanding and verification of analytical modeling is needed. S-shaped curved pedestrian cable-stayed bridge is always twisted because the cable is arranged on one side of the inverted triangular truss girder. In order to suppress the torsion, the Link-shoes are arranged at the left and right top members with reference to the Bearing placed at the mid-bottom member. The first research is related to the modeling method of Link-Shoe and Diaphram. In order to accurately reflect the transverse structural system and the torsional stiffness, it was necessary to model the Link-Shoe and the Diaphram directly rather than indirectly using the stiffness of the Bearing. The second study is related to the lateral arrangement of Bearing and Link-Shoes. Method 1 is to place in order of Link-shoe, Bearing, and Link-shoe from outside the curve radius. Method 2 is place to in order of Bearing, Bearing, and Link-shoe. In method 2, compared to method 1, the stress in the outer top member was larger and the stress in the inner one was decreased. It is analyzed that the stress adjustment is possible according to the lateral arrangement of Bearing and Link-Shoe.

• Korean Journal of Breeding Science
• /
• v.49 no.1
• /
• pp.41-46
• /
• 2017

The sorghum (Sorghum bicolor (L.) Moench) variety 'Sodamchal' was developed and registered by Department of Sothern Area Crop Science, National Institute of Crop Science (NICS) in 2013. This variety was developed from the cross between 'Hwanggeumchal' with brown grain and 'Jungmo4001' with semi-dwarf trait. 'Sodamchal' is the first semi-dwarf stature with waxy endosperm ever developed in Korea. The yield performance of 'Sodamchal' was 2.95 MT/ha in local adaptability test for 2 years. It had 91 cm culm length, which was 58 cm shorter than that of 'Hwanggeumchal', 26.3 cm panicle length, 22.0 mm thickness of culm, 21.1 g in 1,000 grain weight. It could be reduce the lodging problem and also adapted to mechanized cultivation. 'Sodamchal' produces high quantities of polyphenol and radical scavenging activitiy with diphenyl-picrylhydrazyl (DPPH), 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) in pigmented testa. Above all 'Sodamchal' is suitable for use as a parental source for the development of improved pollinator parent lines for developing semi-dwarf sorghum with waxy endosperm and antioxidant activity. (Variety registration No. 6244)

• Korea journal of population studies
• /
• v.24 no.1
• /
• pp.5-40
• /
• 2001

We have approached this study on the basis of population and family changes. We have selected two suburban and two general rural areas for this research. The suburban rural areas are located next to Chungju City, which is the biggest city in Chungbuk Province, and the residents are able to commute to Chungju. The general rural areas are located in Boeun Gun, which is a typical agricultural county in Chungbuk Province. We have conducted two round surveys at the research areas: 1995-1996 for the first round and 1999-2000 for the second round surveys. Since the surveys were completed ones interviewed by enumerators, we have used the survey data directly for the analysis by year and region. The population structure by age and sex in general rural areas is shaped as a reverse triangle, which is becoming more serious because of the continuing emigration of young generation. Most of the young generation moves to the urban areas and their old parents only are left in their hometown, rural areas. When the parents become old and die, the number of households in the areas decreases rapidly. If there are no more new family formations, therefore, the rural society itself would cease to exist in near future. However, the situation of suburban rural areas was a different case. Although the rural young generation has moved to urban areas, other young age groups have moved into the areas with their small enterprises and for the low living costs. The original residents become older and the young age groups are replaced with the new immigrants continuously. Therefore, the traditional agricultural society will be replaced with a non-agricultural society, which will have more characteristics of urban areas.