• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.9
• /
• pp.747-755
• /
• 2014

The heat transfer mechanism for radiation is directly related to the emission of photons and electromagnetic waves. Depending on the participation of the medium, the radiation can be classified into two forms: surface and gas radiation. In the present study, unknown radiation properties were estimated using an inverse boundary analysis of surface radiation in an axisymmetric cylindrical enclosure. For efficiency, a repulsive particle swarm optimization (RPSO) algorithm, which is a relatively recent heuristic search method, was used as inverse solver. By comparing the convergence rates and accuracies with the results of a genetic algorithm (GA), the performances of the proposed RPSO algorithm as an inverse solver was verified when applied to the inverse analysis of the surface radiation problem.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.1
• /
• pp.59-66
• /
• 2024

In this paper, the method to design the antenna, which is suitable for an impulse-like waveform radiation, is presented. In general, the impulse-like waveform has its spectrum of around sub GHz bandwidth and the antenna should be properly designed for not only operating wide-bandwidth also reflecting the time domain characteristics for near-zone impulse radar applications. In this regard, Vivaldi antenna has been designed and characterized in terms of short-pulse radiating aspects in the time domain and verified by measured results. The designed antenna has shown to be operating within wide-bandwidth and to be stable for the input impedance from 1.8 to more than 10GHz. The far-zone radiating waveform has been investigated on each plane at the interval of 30degree and the designed antenna has shown to be a directive characteristic. It can be seen that those results proposed are widely applicable to the near area sensing applications such as ground-penetrating radar.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.6
• /
• pp.561-567
• /
• 2011

The inverse radiation analysis of a two-dimensional irregular configuration using unstructured triangular meshes is presented. In this study, an enclosure filled with an absorbing, emitting and scattering medium with diffusely emitting and reflecting opaque boundaries is considered. The finite volume method is applied to solve the radiative transfer equation in order to simulate the measured incident radiation values which are used as input data for the inverse analysis. The conjugate gradient method is adopted for the estimation of wall emissivities by minimizing the objective function at each iteration step. To verify the performance of the unstructured grid system, we compare the results with those using a structured grid system for the two-dimensional lopsided shape. The effect of measurement errors on the estimation accuracy is also investigated.

• KLA journal
• /
• v.21 no.7
• /
• pp.25-28
• /
• 1980

이 글은 일본과학기술정보센터 중천 의씨가 도서관잡지 1979년 12월호(통권 673호)에 “복사활동의 현황과 문제점”이라고 제목하여 게재한 것을 번역한 것이다. 우리나라의 각 도서관에서도 복사기를 도입하여 참고봉사의 일환으로 봉사에 이바지한지도 10여년(‘60년대 중반기)이 되었으며 그간 역자 자신은 ’97년과 ‘73년에 두 번이나 역자의 근무처에서 복제계장을 역임한바 있으며, 역임 당시 항상 많은 문제점과 애로점(최량복사, 단시기, 이용자의 요구충족 등)을 당면한바 비일비재하였으나 능력 낫인지 해결하나 하지 못하고 그러한 제문제를 한번 발표를 하려고도 했으나 차일피일 하던 중 역자가 동감을 느낀 글을 발견하여 이 방면에 관심을 가진 제현들에게 참고가 되리라 믿어 소개하는 바이다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.6 no.4
• /
• pp.6-11
• /
• 2001

In this paper, the aperture-coupled U-slot microstrip patch antenna is studied for the bandwidth improvement. The aperture is used as a mechanism for coupling the radiating element to the microstrip feedline, and the aperture-coupled configuration provides the advantage of isolating spurious feed radiation by the use of common ground plane. Experimental results such as return loss, VSWR, radiation pattern and gain measurements are presented on the aperture-coupled U-slot microstrip patch antenna. The impedance bandwidth (VSWR≤2) of the antenna is 6.4% centered at 2.35GHz, and the average gain is 5.3 dBi.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.10
• /
• pp.1516-1523
• /
• 2003

An inverse radiation analysis is presented for the estimation of the boundary emissivities for an absorbing, emitting, and scattering media with diffusely emitting and reflecting opaque boundaries. The finite-volume method is employed to solve the radiative transfer equation for a two-dimensional irregular geometry. A hybrid genetic algorithm is proposed for improving the efficiency of the genetic algorithm and reducing the effects of genetic parameters on the performance of the genetic algorithm. After verifying the performance of the proposed hybrid genetic algorithm, it is applied to inverse radiation analysis in estimating the wall emissivities in a two-dimensional irregular medium when the measured temperatures are given at only four data positions. The effect of measurement errors on the estimation accuracy is examined.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1639-1644
• /
• 2003

A hybrid genetic algorithm is developed for estimating the wall emissivities for an absorbing, emitting, and scattering media in a two-dimensional irregular geometry with diffusely emitting and reflecting opaque boundaries by minimizing an objective function, which is expressed by the sum of square errors between estimated and measured temperatures at only four data positions. The finite-volume method was employed to solve the radiative transfer equation for a two-dimensional irregular geometry. The results show that a developed hybrid genetic algorithms reduce the effect of genetic parameters on the performance of genetic algorithm and that the wall emissivities are estimated accurately without measurement errors.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.3
• /
• pp.150-157
• /
• 2002

A nonlinear shaping method for a wire antenna is presented to improve the limited pulse radiation ability due to the frequency characteristics with nulls which are found in the conventional straight or V antennas. The developed scheme is based on the minimization of frequency-dependence of the radiated electric field intensity over wide band, hence giving the ripple-type frequency characteristics. It is shown that the synthesized shape has more advantage in the case of shorter pulse. That is, we found that for shorter pulse exciting, the radiated peak value of the synthesized antenna is larger than that of the conventional linear antenna. The inverse discrete Fourier transform based on the moment method is used for the transient analysis of current distribution and far field electric field.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.3 s.118
• /
• pp.233-240
• /
• 2007

In this paper, the broadband cross monopole antenna is presented and the radiation characteristics are investigated. The presented broadband cross monopole antenna is composed of the cross monopole element and the folded short stub, which has a excellent band characteristics more than the existing cross monopole antenna. To conform the broadband characteristics of the presented antenna, the experimental antenna is designed, fabricated, and its radiation characteristics are measured in $1.75\sim2.655\;GHz$. It is shown that the designed antenna has the nondirectional pattern in the horizontal plane, the directional pattern in the vertical plane, VSWR less than 1.5, and gain in $2.17\sim4.87\;dBi$. From these results, the presented antenna is conformed as a broadband indoor antenna which can be used for PCS, WCDMA, Wibro, and satellite DMB band.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.1
• /
• pp.127-134
• /
• 2014

X-Band taper slot-typed active phased array antenna is studied and designed. Through the simulated and measured performances, it is confirmed that both of active reflection coefficient and active radiation pattern of the designed phased array antenna are agreed well with those of the prototype manufactured one. From this study, the proposed antenna structure is matched to the design target of characteristics of antenna's broadband beam.