• Journal of Korea Water Resources Association
• /
• v.50 no.12
• /
• pp.849-862
• /
• 2017

The increased frequency of meteorological disasters has been observed due to increased extreme events such as heavy rainfalls and flash floods. Numerous studies using high-resolution weather radar rainfall data have been carried out on the hydrological effects. In this study, a conditional merging technique is employed, which makes use of geostatistical methods to extract the optimal information from the observed data. In this context, three different techniques such as kriging, inverse distance weighting and spline interpolation methods are applied to conditionally merge radar and ground rainfall data. The results show that the estimated rainfall not only reproduce the spatial pattern of sub-hourly rainfall with a relatively small error, but also provide reliable temporal estimates of radar rainfall. The proposed modeling framework provides feasibility of using conditionally merged rainfall estimation at high spatio-temporal resolution in ungauged areas.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.3
• /
• pp.221-228
• /
• 2011

For service-area-widening and commercialization of DGNSS service, Ministry of Land, Transport and Maritime Affairs is developing a DGNSS service based on VRS using T-DMB. In this study, three PRC generation algorithms are developed for VRS DGNSS and their accuracies were evaluated. Three DGNSS correction generation algorithms are based on inverse distance weighting, 1st- and 2nd- multiple linear regression, and their positioning accuracies were compared in terms of the number of reference stations used for network composition and the algorithm type. As a result, the positioning accuracy of the case of using 16 sites is better than that of 6 sites. And the algorithm using the multiple linear regression showed the best performance. When the positioning accuracy of VRS DGNSS was compared with the traditional single-reference DGNSS, the improvement ratio was 20-23% and 20-36% for the horizontal and vertical directions, respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.37-43
• /
• 2012

In this paper, we analysis wideband spectrum sensing with distance based weight combining for Cognitive Radio (CR) systems. CR systems is implemented the spectrum of the Primary User(PU) by using a energy detection method. Threshold is determined in accordance with the constant false alarm rate (CFAR) algorithm for energy detection. The signal of PU is BPSK signal and the wireless channel between a PU and CR systems is modeled as Gaussian channel. From the simulation results, the wideband sensing with distance based and Distance based weight Combing (DWC) methods shows higher spectrum sensing performance than single CR user spectrum sensing.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.948-952
• /
• 2009

면적평균강우량을 정확하게 추정하는 것은 수문조사 결과로 생성된 수위-유량관계곡선 검증을 위한 연간 유출율 및 유황분석 시에 매우 중요하다. 면적평균강우량을 산정하는 방법은 일반적으로 산술평균법, 티센법, 등우선법 등이 있는데, 최근 실무에서는 GIS Tool을 이용하여 티센다각형을 작도하고 가중치를 산정하여 관측소별 강우량을 유효강우량으로 변환하여 이용하거나, 평지 또는 좁은 유역의 경우 산술평균법을 적용하고 있다. 그러나 티센법은 지형적인 영향을 고려할 수없고, 산술평균법의 경우 우량계 밀도와 위치, 지형이 고려되지 못한다는 단점이 있기 때문에, 등우선법을 이용하여 면적평균강우량을 산정하는 것이 대부분 산악지역으로 이루어진 국내 현실에 가장 적합하다. 본 연구에서는 수문조사가 이루어지고 있는 낙동강 본류, 댐상류 등 13개 유역의 유역별 면적 평균강우량을 각각 산술평균법, 티센법, 등우선법을 이용하여 산정하였다. 등우선도의 작성을 위하여 관측소별 강우량을 역거리가중법(IDW), RBF, Kriging 기법을 이용하여 강우량의 공간보간을 실시하였으며, 등우선 간격의 영향을 검증하기 위하여 각 보간법 별 등우선 간격을 10mm, 50mm, 100mm로 분할하여 면적평균강우량을 산정하였다. 각 면적평균강우량 산정기법 및 등우선 간격별로 산정된 면적평균강우량을 비교하였고, 유역면적 등에 따른 면적평균강우량의 변화특성을 분석 하였다.

• The Korean Journal of Nuclear Medicine
• /
• v.32 no.5
• /
• pp.414-424
• /
• 1998

Purpose: Cross-modality coregistration of positron emission tomography (PET) and magnetic resonance imaging (MR) could enhance the clinical information. In this study we propose a refined technique to improve the robustness of registration, and to implement more realistic visualization of the coregistered images. Materials and Methods: Using the sinogram of PET emission scan, we extracted the robust head boundary and used boundary-enhanced PET to coregister PET with MR. The pixels having 10% of maximum pixel value were considered as the boundary of sinogram. Boundary pixel values were exchanged with maximum value of sinogram. One hundred eighty boundary points were extracted at intervals of about 2 degree using simple threshold method from each slice of MR images. Best affined transformation between the two point sets was performed using least square fitting which should minimize the sum of Euclidean distance between the point sets. We reduced calculation time using pre-defined distance map. Finally we developed an automatic coregistration program using this boundary detection and surface matching technique. We designed a new weighted normalization technique to display the coregistered PET and MR images simultaneously. Results: Using our newly developed method, robust extraction of head boundary was possible and spatial registration was successfully performed. Mean displacement error was less than 2.0 mm. In visualization of coregistered images using weighted normalization method, structures shown in MR image could be realistically represented. Conclusion: Our refined technique could practically enhance the performance of automated three dimensional coregistration.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.11 no.2
• /
• pp.69-77
• /
• 1993

Investigation is given to the detailed procedure of a computer assisted automatic correction for scanning errors of the digital images of close-range photographs scanned by the CCD camera scanner. After determination of the exterior orientation parameters, photo coordinates of the all pixels were calculated using collinearity equation. For the generation of geometric corrected image from the photo coordinates of the all pixels, inverse-weighted-distance average method was used. And the accuracy of the resulting new image was checked comparing its image coordinates with there corresponding ground coordinates for the check points.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.5
• /
• pp.191-199
• /
• 1993

Investigation is given to the detailed procedure of a computer assisted automatic technique for ortho-image generation from digital stereo image data of close-range photographs scanned by the CCD camera scanner. After rectification of geometric scanning errors, the bundle adjustment technique was used to determine the exterior orientation parameters of terrestrial camera. An automatic correlation matching technique was applied to search for the conjugate pixels in digital stereo pairs. And the 3-dimensional coordinates of the corresponding pixels were calculated by the space intersection method. For the generation of ortho-image from the calculated coordinates and right image data values, inverse-weighted-distance average method was used. And the accuracy of the resulting ortho-image was checked by comparing its image coordinates with there corresponding ground coordinates for the check points.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.446-446
• /
• 2022

본 연구에서는 MODIS(MODerate resolution Imaging Spectroradiometer) 다중 위성영상을 기반으로 전국 시공간 토양수분 및 토양수분 기반의 가뭄지수 SWDI(Soil Water Deficit Index)를 산정하였다. 시공간 토양수분의 산정을 위해 입력자료로 MODIS 위성의 지표면온도(Land Surface Temperature, LST), 증발산 및 식생(Enhanced Vegetation Index, EVI; Fraction of Photosynthetically Active Radiation, FPAR; Leaf Area Index, LAI; Normalized Difference Vegetation Index, NDVI) 관련 산출물 자료와 지상 관측자료인 일 단위 강수량 자료를 구축하였다. MODIS 위성영상은 산출물별로 제공되는 QC(Quality Control) 영상을 활용해 보정을 수행하였고, 공간 강수량 자료는 기상청에서 제공하는 전국 92개 지점의 종관기상관측자료를 구축하여 공간보간기법인 역거리가중법을 적용해 생성하였다. 실측 토양수분은 농촌진흥청에서 제공하는 76개 지점의 토양 깊이 10 cm에 설치된 TDR(Time Domain Reflectomerty) 센서에서 측정된 토양수분 자료를 활용하였으며, 토양수분 모의 시 토양 속성을 고려하기 위해 국립농업과학원에서 제공하는 토양도를 구축하여 활용하였다. 토양수분 산정 모형은 다중선형회귀모형(Multiple Linear Regression Model, MLRM)을 활용하였으며, 계절 및 토성에 따른 회귀식을 산정하였다. 회귀식 기반의 토양수분과 토성별 포장용수량 및 영구위조점 값을 이용하여 SWDI를 산정하고, 실제 가뭄 발생 시기 및 지역과의 비교하고자 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.381-381
• /
• 2018

우리나라에서는 지속적인 자연재해로 각기 다른 필요성과 목적에 따라 다양한 형태의 홍수 침수 관련 지도가 작성되어 왔다. 연구 성과로 작성된 계획 빈도 및 상위 2개 빈도의 호우피해예상도를 실측 강우와 연계하여 재난관리단계별 대응단계에 활용하기 위해 실시간 피해위험구역을 표출하고자 한다. 본 연구는 실시간으로 피해위험구역을 표출하기 위해 실측 강우와 연계된 호우피해예상도에 공간 보간 알고리즘을 적용하고자 한다. 호우피해예상도란 돌발호우나 태풍으로 인하여 홍수가 발생하면 인명 및 재산피해를 최소화하기 위해 홍수지역을 미리 예측 가능하도록 제작된 지도이다. 지형자료(DEM), 하천 중심선(Stream Centerline), 하천 횡단면(Cross-Section Line), 제방고(Bank), 수문기상 자료(Hydrological Data), 조도계수(Roughness) 등을 사용하여 하천법 제 21조와 하천법시행령 제 17조를 근거로 작성된다. 본 연구에서는 호우피해예상도에 IDW(Inverse Distance Weighted, 역거리가중법) 보간, TIN(Triangulated Irregular Network system, 불규칙삼각망) 보간, Kriging 보간 방법 적용 알고리즘을 제시하고자 하였다. 호우피해예상도에 보간 알고리즘을 적용하기 위해 보간 방법에 따른 적용사례를 분석하였으며 그 결과, 보간 알고리즘을 적용한 호우피해예상도 보간을 통하여 계획빈도 및 상위 2개 빈도 이외의 빈도(하위빈도-계획빈도, 계획빈도-상위빈도 구간)에 대한 호우피해예상도의 피해위험구역 구현 방안을 제시하였다. 호우피해예상도에 IDW, TIN, Kriging 보간 알고리즘을 적용하여 계획빈도 및 상위빈도 이외의 빈도에 대한 피해위험구역을 표출 할 수 있다. 표출된 계획빈도 및 상위빈도 이외의 빈도를 지점확률강우량-빈도에 대한 Matching table을 통하여 실측 강우와 연계 가능하다. 본 연구 결과는 추후 풍수해피해예측시스템에 활용하여 재난관리단계별 예방 및 대응 단계에 활용 할 수 있을 것으로 판단된다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.2
• /
• pp.1-17
• /
• 2022

This study analyzed the PM_2.5 pattern by using data measured for one year from June 2020 to May 2021 by 21 low-cost sensors installed near the Changwon National Industrial Complex in Changwon, Gyeongsangnam-do. For the PM_2.5 pattern, the land use types around the measuring points and meteorological factors such as air temperature and wind speed were considered. The PM_2.5 concentration was high from November to March in winter, and from 1 to 9 in the morning and early in the morning by time zone. The concentration of PM_2.5 was higher as it got closer to the industrial area, but the concentration was lower in the residential area and public facility area. In terms of meteorological factors, the higher the air temperature and wind speed, the lower the concentration of PM_2.5. As a result of this study, it was possible to identify the PM_2.5 patter near Changwon National Industrial Complex. This result will be useful data that can be used in urban and environmental planning to improve air quality including PM_2.5 in urban area in the future.