• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.4
• /
• pp.36-43
• /
• 2017

We studied attenuation characteristics of shock waves induced by a donor charge and the sensitivity of an acceptor for optimal design of a TBI (Through-bulkhead initiator). The attenuation behavior of shock waves was studied by measuring free surface velocity using a VISAR (Velocity Interferometer System for Any Reflector), and the sensitivity of the acceptor explosives was analyzed via SSGT (Small Scale Gap Test). It was found that the acceptor sensitivity obtained by the SSGT may be inappropriate for the design of the small-scale explosive devices such as TBI due to the different shock duration time.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.5
• /
• pp.19-30
• /
• 2016

We presented a hydrodynamic modeling necessary to accurately reproduce shock-induced detonation of pyrotechnic initiator. The methodology for such numerical prediction of shock propagation is quite straight forward if the models are properly implemented and solved in a well-formulated shock physics code. A series of SSGT(Small Scale Gap Test) and detailed hydrodynamic simulation are conducted to quantify the shock sensitivity of an acceptor that contains 97.5% RDX. A TBI(Through Bulkhead Initiator) system, consisting of a train configuration of Donor(HNS+HMX) - Bulkhead(STS) - Acceptor(RDX), were investigated to further validate the interaction between energetic and non-reactive materials for predicting the detonating response for successful operation of such small pyro device.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.5
• /
• pp.80-87
• /
• 2017

The performance of a pyrotechnic device that consists of donor/acceptor pair separated by a bulkhead relies on shock attenuation characteristics of the gap material and shock sensitivity of the donor and acceptor explosives. In this research, a micro Kapton flyer was accelerated by an exploding foil initiator (EFI) to figure out shock sensitivity of hexanitrostilbene (HNS) to impact. The averaged shock pressure and duration imparted to the explosive by flyer impact are measured by using a velocity interferometer for any reflector (VISAR) and impedance matching technique. Consequently, this research shows the possibility to determine the critical flyer velocity for initiating the miniaturized pyrotechnic unit by determining the relations between the impact velocity, the amplitude and width of impact loading.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.2
• /
• pp.75-85
• /
• 2016

A pyrotechnic system consisting of donor/acceptor pair separated by a gap relies on shock attenuation characteristics of the gap material and shock sensitivity of the donor and acceptor charges. Despite of its common use, numerical study of such pyrotechnic train configuration is seldom reported because proper modeling of the full process requires precise capturing of the shock wave attenuation in the gap prior to triggering a full detonation of high explosive and accurate description of the high strain rate dynamics of the explosively loaded inert confinements. We apply a Eulerian level-set based multimaterial hydrocode with reactive flow models for pentolite donor and heavily aluminized RDX as acceptor charge. The complex shock interaction, critical gap thickness, acoustic impedance, and go/no-go characteristics of the gap test are quantitatively investigated.

• Journal of the KSME
• /
• v.31 no.4
• /
• pp.380-388
• /
• 1991

고에너지 속도 가공법 중에서 주요한 것을 발췌하여 그 개요와 금후의 전개에 대하여 기술하 였다. 폭발압착과 같이 실제로 활용되고 있는 기술로부터, 폭약 또는 전자기력에 의한 분말압축 성형과 같은 개발도상의 기술까지 고에너지 속도가공법의 범주에 속하는 기술분야는 광범위하다. 관용의 가공법에 비하면 역사도 짧고, 실용화에 있어서 해결하여야 할 문제도 많이 남아있다. 현재 실용화를 위한 연구도 착실히 성과를 얻고 있으며, 고에너지 속도 가공법의 앞날은 밝다고 할 수 있다. 고에너지 속도가공의 진보와 발전을 위하여는 가공기술에 관한 연구와 함께, 재료가 고속변형을 받을 때의 거동과 특성에 관한 연구를 함께 진행할 필요가 있다. 여기서는 후자의 연구에 관하여 언급하지 않았으나, 고속재료 시험법과 그 평가법, 소성도 전파 해석, 계측법 등 많은 연구 성과가 매년 보고되고 있다.

• Journal of the Korea Society for Simulation
• /
• v.28 no.2
• /
• pp.1-14
• /
• 2019

A full scale hydrodynamic simulation that requires an accurate reproduction of shock-induced detonation was conducted for design of an energetic component system. A detailed hydrodynamic analysis SW was developed to validate the reactive flow model for predicting the shock propagation in a train configuration and to quantify the shock sensitivity of the energetic materials. The pyrotechnic device is composed of four main components, namely a donor unit (HNS+HMX), a bulkhead (STS), an acceptor explosive (RDX), and a propellant (BPN) for gas generation. The pressurized gases generated from the burning propellant were purged into a 10 cc release chamber for study of the inherent oscillatory flow induced by the interferences between shock and rarefaction waves. The pressure fluctuations measured from experiment and calculation were investigated to further validate the peculiar peak at specific characteristic frequency (${\omega}_c=8.3kHz$). In this paper, a step-by-step numerical description of detonation of high explosive components, deflagration of propellant component, and deformation of metal component is given in order to facilitate the proper implementation of the outlined formulation into a shock physics code for a full scale hydrodynamic simulation of the energetic component system.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.5
• /
• pp.1-11
• /
• 2014

Sympathetic detonation (SD) of high explosives occurs when a detonating donor initiates neighboring acceptors. The present study focuses on the hydrodynamic simulation of one-on-one sympathetic detonation of 155 mm charge filled with PBXN-109. Both unbuffered and buffered SD configurations are performed while changing the distance between each charge, in order to investigate the detonation sensitivity to a donor initiation. The cause of a SD is by a shock impact for the unbuffered case at a close range, while at a distant range, blast fragment penetration is the primary cause. The buffers can reduce the incident sensitivity to a SD by reducing the strengths of shock wave and impinging fragments.

• Korean Journal of Microbiology
• /
• v.38 no.4
• /
• pp.247-253
• /
• 2002

The cellular responses of TNT-degrading bacterium, Stenotrophomonas sp. OK-5 to explosive 2,4,6-trini-trotoluene (TNT) as an environmental contaminant were examined. Survival of the strain OK-5 with time in the presence of different concentrations of TNT under sublethal conditions was monitored, and viable counts paralleled the production of the stress shock proteins in this bacterium. Total cellular fatty acids analysis showed that strain OK-5 produced or disappeared several different kinds of lipids when grown on TNT media than when grown on TSA. Under scanning electron microscope, the cells treated with 0.5 mM TNT for 12 hrs showed irregular rod shapes with wrinkled surfaces. Analyses of SDS-PAGE and Western blot using anti-DnaK and anti-GroEL revealed that several stress shock proteins including 70 kDa DnaK and 60 kDa GroEL in strain OK-5 were newly synthesized at different TNT concentrations in exponentially growing cultures. 2-D PAGE of soluble protein fractions from the culture of OK-5 exposed to TNT demonstrated that approximately 300 spots were observed on the silver stained gel ranging from pH 3 to pH 10. Among them, 10 spots significantly induced and expressed in response to TNT were selected and analyzed. As the result of internal amino acid sequencing with ESI-Q TOF, two proteins, spot #1 and spot #10 were assigned the DnaK protein XF2340 of Xylella fastidiosa and stress-induced protein of Mesorhizobium loti, respectively.

• Microbiology and Biotechnology Letters
• /
• v.31 no.1
• /
• pp.75-82
• /
• 2003

The cellular responses of RDX-degrading bacterium, Pseudomonas sp. HK-6 to explosive hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) were examined. Strain HK-6 grown at different RDX concentrations was found to demonstrate the survival rate in proportional to the rate of the stress shock proteins produced in this bacterium. Analysis of total cellular fatty acid acids showed that lipids 10:0 iso and 14:1 $\omega$5c/$\omega$5t increased approx three times in strain HK-6 grown on RDX media than TSA media. SDS-PAGE and Western blot using anti-DnaK and GroEL revealed that several stress shock proteins including 70 kDa DnaK and 60 kDa CroEL were newly synthesized in strain HK-6 exposed to different RDX concentrations in exponentially growing cultures. 2-D PAGE of soluble protein fractions from the culture of HK-6 exposed to RDX demonstrated that approximately 300 spots were observed on the silver stained gel ranging from pH 3 to pH 10. As a result, 10 spots were significantly induced and expressed in response to RDX. Scanning electron microscopy fur the cells treated with 0.135 mM RDX for 12 hrs showed the presence of perforations and irregular rod shapes with wrinkled surfaces.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.433-441
• /
• 2004

국내 발파 현장에서 사용되고 있는 폭약류에 강력한 폭굉력을 충분하게 발휘하기 위해서는 뇌관(Blasting cap, Detonator)의 역할이 중요하다. 그리고 이 뇌관의 정밀성에 따라 발파 효율의 차이가 있게된다. 초기의 도화선 및 공업뇌관에서 시작하여 현재 정밀성 면에서는 MS(Milli Second)뇌관의 경우 20ms또는 25ms의 정밀한 시차로 순차적으로 기폭함으로써 발파효과의 극대화와 소음 및 진동제어에 큰 효과를 이루었으나, 최근 개발된 진자뇌관의 경우 자체 IC회로를 내징하여 $1{\sim}2ms$의 초정밀시차(오차범위 $0.1{\sim}0.2ms$이내)의 구현이 가능해짐에 따라 이를 적절히 조합하여 설계함으로써 각종 제어발파, 파쇄도 향상, 암손상영역 저감 등의 효과에 대해 국외에서 연구가 진행되고 있는 것으로 알려지고 있다. 그러나 우리나라와 같이 도심지 발파 및 터널이나 노천 현장 근거리에 보안물건이 위치해 있어 진동제어가 절실히 필요한 상황에서 진동제어에 효과가 있는 것으로 알려진 전자뇌관에 대한 연구가 이루어지고 있지 않은 상황에서 본 연구는 앞으로 이루어질 전사뇌관에 대한 수많은 연구에 기초자료를 제공하고자 실시하였다. 본 연구에서는 이를 위해 국내에서 최초로 2003년 9월 23일 강원도 양구 지역읜 00터널에 전자뇌관을 이용한 시험발파를 실시하였고, 발파에 의한 진동 등을 조사하여 그 효율성을 검토하였다. 이를 위해 전자뇌관의 특성과 장점을 최대한 살리기 위하여 각공을 발파하는 방식, 즉 1지발에 1공을 발파하는 방식을 채택하고 비전기 뇌관과 전자뇌관으로 설계를 하여 각각의 발파효율을 비교하여 보았다. 그 결과 발파신동의 경우 비전기뇌관을 이용하여 1공씩을 1지발로 발파를 한 경우에는 18${\sim}$56%의 진동저감 효과가 있었고, 번 설계에 의해 진해오딘 발파에 비하여는 최대 70% 이상의 진동저감 효과가 있는 것으로 나타났다.