• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.37 no.4
• /
• pp.9-15
• /
• 2000

The purpose of this paper is to minimize the a slack computation time of the scheduling of a soft aperiodic real-time tasks in a fixed priority real-time system. The proposed algorithm reduces the computation overhead at on-line time and supports the maximum slack time assigned for aperiodic real-time tasks. The proposed algorithm has 10~20% more response time for aperiodic real-time tasks than that of Slack Stealing Algorithm that offers optimal response time in fixed priority real-time system. However, the performance of the proposed algorithm is seven times better in a scheduling overhead.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2002.08a
• /
• pp.3-44
• /
• 2002

$\cdot$인구 노령화 현상 가속화 $\cdot$캐주얼한 생활습관 $\cdot$개인적인 여유시간 확보 $\cdot$소비자 기호의 국제화 및 범용화 $\cdot$여행인구 증가 및 통신기술 발달로 정보교류 발달 (중략)

• Journal of KIISE:Computing Practices and Letters
• /
• v.11 no.1
• /
• pp.62-68
• /
• 2005

This paper presents a scheme to enhance fixed priority scheduling algorithms on multiprocessors. This scheme gives the highest priority to jobs with zero laxity and schedules them Prior to other jobs. A fixed priority algorithm employing this scheme strictly dominates the original one; it can schedule all task sets schedulable by the fixed priority algorithm and some task sets not schedulable by the fixed priority algorithm. Simulation results show that the proposed scheme improves fixed priority algorithms in terms of the number of schedulable task sets and schedulable utilization bound.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11B
• /
• pp.1631-1639
• /
• 2010

This paper proposes a scheduling algorithm that can reduce the power consumed for execution of application programs and the communication cost incurred due to dependencies among tasks. The proposed scheduling algorithm can increase energy efficiency of the DVS(Dynamic Voltage Scaling) by estimating laxity usage during scheduling, making up for conventional algorithms that apply the DVS after scheduling. Energy efficiency can be increased by applying the proposed algorithm to complex multimedia applications. Experimental results show that energy consumptions for executing HD MPEG4, MotionJPEG codec, MP3, and Wavelet have been reduced by 11.2% on the average, when compared to conventional algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6A
• /
• pp.782-793
• /
• 2000

This paper presents a simple dynamical prediction scheme of the signal level which is attenuated and varied due to rain fading in satellite communication links using above 10GHz frequency bands. The proposed prediction scheme has four functional blocks for discrete-time low-pass filtering, slope-based prediction, mean-error correction and hybrid fixed/variable prediction margin allocation. Through simulations using Ka-band attenuation data obtained from the data measured over Ku-band by frequency-scaling, it is shown that the slope-based prediction with the mean-error correction has as small standard deviation of prediction error as below 1 dB, and that the error is about 1.5 to 2.5 times as small as that without the mean-error correction. The hybrid prediction margin allocation requires smaller average margin than those of both fixed and variable methods.

• Journal of Energy Engineering
• /
• v.24 no.2
• /
• pp.40-44
• /
• 2015

Sensitivity on the reactor safety was evaluated for the safety margin and time delay applied to the opening pressure of liquid relief valve(LRV) of the primary heat transport system(PHTS) in the pressurized heavy water reactor(PHWR) type nuclear power plant. Since the LRV is the pressure boundary for the PHTS in the safety analysis, the operating of LRV has a significant effect on the safety analysis results. Therefore it is required during the regulatory review of Wolsong Unit 1 safety analysis to find the safety effect of the application of safety margin and time delay to the LRV opening pressure for the safety analysis of PHTS pressurizing events.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.66-68
• /
• 2004

PID제어기를 플랜트 파라미터를 이용하여 구성하는 IMC-PID제어에 대해 연구한다. 특히 변하는 플랜트에 대해서는 자기동조(ST, Self-Tuning)를 사용하여 시스템을 식별하여 활용한다. 특히 실시간으로 개루프의 위상여유 및 이득여유를 모니터링하여 정해진 구역을 벗어나게 되면 식별된 시스템파라미터를 이용하여 IMC-PID제어기를 구성한다. 또 시간영역 지표로 과도한 오차가 발생하는 경우에도 제어기를 갱신함으로서 전체적으로 보면 견실 PID제어기 형태를 갖게 한다.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.441-443
• /
• 2005

종래의 대규모계통에서 전압안정도의 여유판별을 시행 할 경우 수식적 접근법을 이용한 해석 방법이 사용되어 왔다. 하지만, 이러한 수식적 해석 방법들은 실제 계통에 적용할 경우 상태변수가 많아지고 계산식이 복잡해짐에 따라 많은 계산과정과 시간이 소요되는 문제점이 있다. 따라서 본 논문에서는 전압안정도의 여유판별을 빠르고 정확하게 해석하기 위하여 난수를 이용한 확률적 접근방식의 하나인 몬테카를로 기법을 전압 안정도의 여유계산 방안으로 제시 하고자 한다.

• Women's Health Nursing
• /
• v.4 no.2
• /
• pp.162-172
• /
• 1998

모성역할 획득에 영향을 주는 변수를 이해한다는 것은 모성역할 획득에 대한 체계적인 연구와 실질적인 간호중재를 가능하게 한다. 생후 4개월된 첫 아기가 있는 어머니를 대상으로 모성역할 획득모형을 발전시키려고 이 연구를 시도하였다. 가설적 모형은 5개의 변수(모성역할 획득, 모성역할 긴장, 일상생활의 시간적 여유, 아기 기질, 사회적지지)로 구성되었다. 대전시에 거주하는 대상자에게 전화를 통하여 동의를 얻은 후, 우편으로 250명에게 질문지를 보내어 161명(64.4%)으로부터 회수되었다. 자료를 Lisrel 프로그램을 이용하여 공변량구조분석을 한 결과, 자료와 가설적 모형과의 전반적 지수는 자유도 21에 카이자승치 31.47, GFI와 AGFI의 값은 .970, .935였고, RMSR, NFI, NNFI는 각각 1.668, .9097, .9425이었다. 간명하고 부합도가 더 좋은 모형을 찾기 위하여 통계적 결과와 이론적 적합성에 따라 2경로(아기기질에서 모성역할 획득, 모성역할 긴장에서 모성역할 획득)를 고정시켰다. 수정모형의 PFI (간명도)가 .7297로 증가하여 수정모형이 더 간명하면서도 부합도가 좋은 모형으로 나타났다. 공변량구조분석 결과 나타난 변인간의 관계는 일상생활의 시간적 여유가 많을수록, 사회적 지지를 많이 받을수록, 아기기질이 순하다고 생각할수록 모성역할 긴장은 적었고, 일상생활의 시간적 여유가 많을수록, 사회적 지지를 많이 받을수록 모성역할 획득은 잘 되었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5C
• /
• pp.555-560
• /
• 2009

A vehicle radar has been studied to avoid the collision of vehicles. A vehicle radar using direct sequence-ultra wideband (DS-UWB) measures the distance between a vehicle and an objective with a sufficient time margin. Therefore, the receiver should estimate the distance by processing the short UWB pulse rapidly. There have been several investigations for distance measuring based on DS-UWB signals. In this paper, we propose a novel method for rapid measuring processing time. Simulation results show that the proposed method has a shorter processing time than the conventional method.