• Title/Summary/Keyword: 엔트로피 모델

Search Result 154, Processing Time 0.027 seconds

CRARQ: A Cooperative Routing using ARQ-based Transmission in Mobile Ad-hoc Wireless Sensor Networks (CRARQ: 모바일 Ad-hoc 무선 센서 네트워크를 위한 ARQ 전송기반 협력도움 라우팅 프로토콜)

  • Duy, Tran-Trung;An, Beong-Ku;Kong, Hyung-Yun
    • Journal of the Institute of Electronics Engineers of Korea CI
    • /
    • v.46 no.2
    • /
    • pp.36-43
    • /
    • 2009
  • In this paper, we propose a Cooperative Routing using ARQ-based Transmission (CRARQ) in Mobile Ad-hoc Wireless Sensor Networks (MAWSN). The goals of the CRARQ are to improve both the efficiency of transmission and the reliability of transmission together. The main features and contributions of the proposed CRARQ for supporting these goals are as follows. First, CRARQ uses a reactive concept to construct a route from a source to a destination. Second, CRARQ chooses the most stable relay at each hop along the route by mobility-based strategy. Third, cooperative transmission using the ARQ technique which can improve reliability is used at each hop to send data packets from source to destination. Finally, we present a theoretical analysis model for the proposed CRARQ. The performance evaluation of our protocol is implemented via simulation using Optimized Network Engineering Tool (OPNET) and analysis. The results of both simulation and analysis show that CRARQ achieves the improved packet delivery ratio (PDR) and outage probability.

A Method of ISAR Geometric Calibration for Point Target Using Impulse-Radio UWB (임펄스 초광대역 레이다를 이용한 점표적의 ISAR 기하 보정 방법)

  • Yu, Jiwoong;Nikitin, Konstantin;Paek, Inchan;Jang, Jong Hun;Ka, Min-Ho
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.26 no.4
    • /
    • pp.397-403
    • /
    • 2015
  • In this paper, a method of ISAR geometric calibration is represented by using impulse-radio UWB radar. The ir-UWB is good for using a signal processing in time domain, so, it does not occur a multi-path or coupling problem. If a signal that between antennas and target is assumed a plane wave, a center of rotation in ISAR geometry model can be estimated by using point target. Before image is reconstructed with sinogram, the center of rotation can be calculated by using least square fitting. This method can be obtained a more contrast image, and a maximum value of entropy of image. The method, that estimates a center of rotation in received data, will be used a initial setup of instruments or a periodic compensation to reconstruct image. It would be useful in medical, security and surveillance imaging equipments that have a fixed geometry.

Significant Structure of Liquid Water (물의 구조와 성질)

  • Pak, Hyung-Suk;Chang, Sei-Hun
    • Journal of the Korean Chemical Society
    • /
    • v.8 no.2
    • /
    • pp.68-74
    • /
    • 1964
  • Water has the melting point, the boiling point, the heat of fusion, and the heat of vaporization all much higher than would be normally expected from the hydrogen compounds of the other members of the oxygen family. Another unique characteristic of ice-Ⅰ is its volume decrease which takes place in its melting. A number of significant efforts have been made in the past to explain these properties quantitatively. The authors, reasoning from the unusually great free surface energy of water and the characteristic volume change on melting, propose the structural model of liquid water as follows. On melting, fluidized vacancies of a molecular size are introduced. Thereupon, for the unusually great surface energy density, molecules surrounding the vacancies become to have close packed arrangement. But molecules not in direct contact with vacancies should still possess the original structure i. e., ice-Ⅰ. When a molecule adjacent to a vacancy jumps into the vacancy, the molecule attains the gaslike degree of freedom. Using the above model, the authors had developed the liquid partition function of water by applying the theory of significant structures in liquids. Molar volume, vapor pressure, entropy of fusion and entropy of vaporization were calculated over a wide temperature range. The results show good agreement with experimental observations.

  • PDF

Cryptographic Analysis of the Post-Processing Procedure in the Quantum Random Number Generator Quantis (양자난수발생기 Quantis의 후처리 과정에 관한 암호학적 분석)

  • Bae, Minyoung;Kang, Ju-Sung;Yeom, Yongjin
    • Journal of the Korea Institute of Information Security & Cryptology
    • /
    • v.27 no.3
    • /
    • pp.449-457
    • /
    • 2017
  • In this paper, we analyze the security and performance of the Quantis Quantum random number generator in terms of cryptography through experiments. The Quantis' post-processing is designed to output full-entropy via bit-matrix-vector multiplication based on mathematical background, and we used the min-entropy estimating test of NIST SP 800-90B so as to verify whether the output is full-entropy. Quantis minimizes the effect on the random bit rate by using an optimization technique for bit-matrix-vector multiplication, and compared the performance to conditioning functions of NIST SP 800-90B by measuring the random bit rate. Also, we have distinguished what is in Quantis' post-processing to the standard model of NIST in USA and BSI in Germany, and in case of applying Quantis to cryptographic systems in accordance with the CMVP standard, it is recommended to use the output of Quantis as the seed of the approved DRBG.

A Entropy Coding Method using Temporal and Spatial Correlation on HEVC (HEVC에서 시공간적 상관관계를 이용한 엔트로피 부호화 방법)

  • Kim, Tae-Ryong;Kim, Kyung-Yong;Lee, Han-Soo;Park, Gwang-Hoon
    • Journal of Broadcast Engineering
    • /
    • v.17 no.1
    • /
    • pp.191-194
    • /
    • 2012
  • The split flag and the skip flag in CU syntax have high correlation on spatial domain as well as temporal domain. This paper suggests a method for enhancing coding efficiency by using not only spatial correlation but also temporal correlation when coding CU information. In the CABAC case, temporal collocated CU information is used for selecting context model of the split flag and the skip flag. In the CAVLC case, current CU information is estimated from temporal collocated CU information then encoded. As a result, a coding efficiency was increased by 0.1%~0.6% in CABAC, 0.1%~0.4% in CAVLC compared with HM 3.0. This method shows better performance on lowdelay condition which uses reference frame close to current frame.

Parameter Estimation of Chiu's Two Dimensional Velocity Distribution Equations (Chiu-2차원 유속분포식의 매개변수 추정)

  • Kim, Yongseok;Yang, Sungkee
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.366-366
    • /
    • 2017
  • 하천의 유량관측 자료는 지표수자원의 확보와 수공구조물의 설계를 위해 가장 기초적인 수문자료로써 정밀하고 지속적인 관측을 요구한다. 최근 유량 관측법은 접촉식 유속측정 방법의 단점을 보완한 전자파 표면유속계나 영상분석기법을 적용한 표면영상유속계(SIV)가 활용되고 있다. 이들 관측장비는 표면유속 관측법에 의해 유량을 측정하므로 보다 정밀한 유량자료를 확보하기 위해서는 측정 영역의 표면유속과 단면의 평균유속에 대한 해석이 필요하다. 이 연구에서는 제주도 남부지역에 위치한 강정천을 대상으로 2011년 7월부터 2015년 6월 까지 월 1~2회 현장관측한 ADCP 자료를 활용하여 Chiu(1987)가 제안한 2차원 유속분포식의 매개변수를 추정하여 정밀한 유량을 산정하였다. 또한 표면영상유속계(SIV)로 산정된 표면유속을 Chiu-2 차원 유속분포식에서 평균유속으로 환산하여 기존의 표면유속을 일률적으로 적용한 수심평균유속 환산계수인 0.85의 적용 값과 비교 분석하였다. 대상하천의 현장에서 72회 관측된 ADCP 자료를 활용하여 각각의 최대유속과 평균유속을 분석하고 엔트로피 계수(M)를 산정한 결과와 유속의 공간적 분포를 모델링하기 위해 제시되는 $_{urf}$를 산정하였으며, 산정된 계수 값을 이용하여 표면유속을 계산한 결과와 ADCP의 관측된 표면유속의 $^2$는 0.874로 나타났다. 이러한 결과는 Chiu-2차원 유속분포식을 연구대상하천에 적용하는 과정에서 추정되는 매개변수의 평균값 사용에 대한 타당성을 보여준다. 이 후 추정된 하천매개변수를 하천현장에 적용성 확인을 위해 강정천의 동일 관측지점에서 표면영상유속계(SIV)를 사용한 표면유속과 유량을 산정함과 동시에 ADCP에 의한 유속 및 유량과 비교 분석하였다. 표면영상유속계(SIV)로 분석된 유속 벡터를 Chiu-2차원 유속분포식에 적용하여 산정된 유량과 기존의 수심평균유속환산계수 0.85를 적용한 유량은 각각 $0.7171m^3/s$과 0$0.5758m^3/s$였다. ADCP 평균유량 $0.6664m^3/s$과의 오차율은 각각 7.63%, 13.64%로 나타나 Chiu-2차원 유속분포식을 적용한 유량이 수심평균유속환산계수 0.85를 적용한 유량에 비해 작은 오차율을 보였다.

  • PDF

Modeling of Thermodynamic Properties of Saturated state Hydrogen using Equation of State (상태방정식을 이용한 포화상태 수소의 열역학적 물성 모델링)

  • Bong-Seop Lee;Hun Yong Shin;Choong Hee Joe
    • Korean Chemical Engineering Research
    • /
    • v.61 no.4
    • /
    • pp.550-554
    • /
    • 2023
  • Fossil energy sources are limited in their sustainable use and expansion due to global warming caused by carbon dioxide emissions. Hydrogen is considered as a promising alternative to traditional fossil fuels. To ensure the stable long-term storage, it is necessary to accurately predict its thermodynamic properties at cryogenic temperatures. Therefore, this study aimed to investigate thermodynamic properties, such as saturated vapor pressure and density, enthalpy, and entropy of liquid and gas, using cubic equations of state that demonstrate relatively simple relationships. Among the three types of equations of state (Redlich-Kwong (RK), Soave-Redlich-Kwong (SRK), and Peng-Robinson (PR)), the SRK model exhibited relatively accurate prediction results for various physical properties.

Suggesting Strategies of Integrating Science Based on Worldview: Climate Change (세계관을 바탕으로 통합과학 교육전략 제안: 기후변화를 중심으로)

  • Oh, Jun-Young;Son, Yeon-A
    • Journal of the Korean Society of Earth Science Education
    • /
    • v.11 no.1
    • /
    • pp.1-20
    • /
    • 2018
  • The purpose of this study is to suggest some strategies for integrated science. It also suggests educational strategies through worldview. The directions of most educational policy are based on the deficit model. It is assumed that learners are always lacking in knowledge, and as a result they do not understand properly. However, it is difficult for the public and students to change their attitudes because they do not feel much lacking. For example, the world view of climate change coexists with an optimistic mechanical worldview and an organic and entropy worldview. This study is characterized by the process of expanding awareness of living and fulfillment of knowledge rather than the existing deprivation model. Unconnected knowledge has problems in diversity. It is neither sustainable nor flexible. It is not about eliminating interdisciplinarity but about lowering it. We go into another area with your deep expertise, but we must have a purpose. As a result, not only problem solving but also dynamic feedback of mutual feedback between other domains increases the quality and quantity of knowledge.

Study on Kinetics and Thermodynamics of Rotary Evaporation of Paclitaxel for Removal of Residual Pentane (파클리탁셀의 잔류 펜탄 제거를 위한 회전증발의 동역학 및 열역학에 관한 연구)

  • Han, Jang Hoon;Ji, Seong-Bin;Kim, Ye-Sol;Lee, Seung-Hyun;Park, Seo-Hui;Kim, Jin-Hyun
    • Korean Chemical Engineering Research
    • /
    • v.55 no.6
    • /
    • pp.807-815
    • /
    • 2017
  • This study investigated the removal efficiency of residual pentane from paclitaxel according to the drying temperature in the case of rotary evaporation, and performed a kinetic and thermodynamic analysis of the drying process. At all the temperatures (25, 30, 35, 40, and $45^{\circ}C$), a large amount of the residual solvent was initially removed during the drying, and the drying efficiency increased when increasing the drying temperature. Five drying models (Newton, Page, modified Page, Henderson and Pabis, Geometric) were then used for the kinetic analysis, where the Henderson and Pabis model showed the highest coefficient of determination ($r^2$) and lowest root mean square deviation (RMSD), indicating that these models were the most suitable. Furthermore, in the thermodynamic analysis of the rotary evaporation, the activation energy ($E_a$) was 4.9815 kJ/mol and the standard Gibbs free energy change (${\Delta}G^0$) was negative, whereas the standard enthalpy change (${\Delta}H^0$) and standard entropy change (${\Delta}S^0$) were both positive, indicating that the drying process was spontaneous, endothermic, and irreversible.

Thermodynamic Analysis of Phenol Adsorption by Powdered Activated Carbon (활성탄에 의한 페놀 흡착의 열역학적 연구)

  • Kim, Hwanik;Lee, Myoung-Eun;Kang, Seoktae;Chung, Jae-Woo
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.35 no.3
    • /
    • pp.220-225
    • /
    • 2013
  • The adsorption characteristics of phenol by the powdered activated carbon (PAC) were investigated by series of batch experiments. The pseudo-second-order model described the adsorption kinetics adequately with correlation coefficients over 0.999, indicating chemical adsorption as the rate-limiting step. The kinetic rate constants were from 0.55 to 19.81 mg $mg^{-1}min^{-1}$. The adsorption isotherm followed the Langmuir isotherm, indicating the homogeneous mono-layer adsorption onto the surface of the adsorbent. The values of activation energy, enthalpy and entropy were 17.44 kJ $mol^{-1}$, -8.26 kJ $mol^{-1}$ and -18.94 J $mol^{-1}K^{-1}$, respectively. The Gibbs free energy was in the range of -2.89~-2.14 kJ $mol^{-1}$. The results show that the phenol adsorption is physical, spontaneous and exothermic reaction.