• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.3
• /
• pp.443-454
• /
• 2020

The JavaScript engine is a module that receives JavaScript code as input and processes it, among many functions that are loaded into web browsers and display web pages. Many fuzzing test studies have been conducted as vulnerabilities in JavaScript engines could threaten the system security of end-users running JavaScript through browsers. Some of them have increased fuzzing efficiency by guiding test coverage in JavaScript engines, but no coverage guided fuzzing of optimized, dynamically generated machine code was attempted. Optimized JavaScript codes are difficult to perform sufficient iterative testing through fuzzing due to the function of runtime guards to free the code in the event of exceptional control flow. To solve these problems, this paper proposes a method of performing fuzzing tests on optimized machine code by avoiding deoptimization. In addition, we propose a method to measure the coverage of runtime-guards by the dynamic binary instrumentation and to guide increment of runtime-guard coverage. In our experiment, our method has outperformed the existing method at two measures: runtime coverage and iteration by time.

• Composites Research
• /
• v.20 no.3
• /
• pp.63-66
• /
• 2007

Structural analysis of automotive engine cover under vibration excitation is performed by finite element analysis (FEA) in order to identify the critical area of the structure. Assembly load due to the tightening of the bolts as well as the vibration excitation were considered to describe the actual loading condition. Natural frequencies of the system were extracted considering the damping effect of the structure. Dynamic analysis was performed based on the extracted natural frequency of the system. Experimental modal analysis (EMA) and measurement of strains were performed to verify the results of the analysis. Analysis results correlated closely with the experimental results. Analysis and experiments showed that contribution of the assembly load should not be ignored to predict the structural failure of the engine cover.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.223-226
• /
• 2004

The objectives of this study are to evaluate mechanical properties of glass ceramic for dome port cover material o( the ramjet. Candidate material for dome port cover of the ramjet is selected the machinable glass ceramic(MACOR glass-filled ceramic, Corning Glass Works, code 9658). Static and dynamic fracture toughness tests were performed to evaluate the apparent fracture toughness of notched specimen.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.1079-1080
• /
• 2012

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.129.1-129.1
• /
• 2005

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.112-115
• /
• 2005

The objectives of this study are to evaluate the dynamic fracture toughness of advance glass ceramics(MACOR glass-filled ceramic, Corning Glass Works) for dome port cover of the ramjet. Static and dynamic fracture toughness tests are performed using strain gage method in the variation of notch radii.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.554-559
• /
• 2007

The cylinder cover stud for assembling the combustion chamber components of low-speed marine diesel engine is one of the main structural components in engine. To understand the structural behavior of the stud is quite important for safe and economic design of it. In this paper, the structural behavior and design adequacy of the stud have been evaluated through strain measurement and structural analysis for the world's two largest engine types. Moreover, a feasibility study for design modification was carried out based on fatigue test and calculation. The results showed that 1) the stud experiences very high stress ratio under normal operating conditions, 2) the fatigue strength of the stud is sufficient, and 3) results from strain measurement and structural analysis were quite close each other.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.267-268
• /
• 2006

The cylinder cover stud of low-speed marine diesel engine is more than just a stud. It is a large structural element occasionally weighing over 200 kg used for assembling the combustion chamber components. Therefore, to understand the structural behavior of the stud and design it safely is quite important considering a catastrophic failure which can be arisen from an inadequate use of it. In this paper, the analysis results of the structural behavior of the stud is introduced. Strain measurement results compared with FE analysis results are summarized. The results showed that 1) the stud stress increased with engine operating load, 2) the maximum stress amplitude was about 10 MPa which is far smaller than the stud's fatigue strength of 61 MPa, 3) the stress ratio is higher than 0.9 and the stud's load factor is about 20 %, and 4) about 7 % of initial pressure tightening load was reduced while changing to a nut tightened condition.

• CDE review
• /
• v.2 no.1
• /
• pp.33-36
• /
• 1996

승용차 산업과 같이 정밀 부품이 요구되는 산업에 있어서 가장 기초가 되고도 중요한 것은 시작금형에 해당하는 정밀 목형 제작이라고 할 수 있다. 부품의 개발은 일반적으로 설계과정, 도면화 과정, 시제품 개발과정, 시제품 성능시험과정, 양산체제 구축과정 등의 순서를 밟는다. 이 과정 중에서 시제품 개발과정은 설계에 의해서 만들어진 제품이 실제 설계자의 의도와 일치하는지를 확인하는 과정이다. 이 과정에서 부품 간의 간섭, 치수나 형상의 확인, 기능 혹은 성능상의 문제점 등을 검토하여 양산체제시에 발생할 수 있는 문제점 등을 최대한 제거하여야 한다. 그런데 시제품 제작에 걸리는 기간이 개발과정 중에서도 비교적 큰 부분을 차지하고 있어 이의 단축이 시급한 실정이다. 현재 시제품 제작업체들 중에서 프레스 금형을 위한 판넬 수지가공에는 3D CAD/CAM을 많이 적용하고 있지만, 주물 소재용 목형제작은 대부분 숙련된 기술자의 수작업에 의존하고 있다. 따라서 개발기간 단축과 비용절감이라는 완성차 업계의 요구와는 거리가 있는 실정이다. 당사는 이미 실린더 헤드, 매니홀더, 트랜스밋션 케이스, 헤드커버, 실린드블럭 등 자동차 엔진의 핵심부품들의 목형을 3D CAD/CAM을 이용하여 생산하고 있기 때문에 이중 트랜스밋션 케이스의 목형제작 과정을 소개하고자 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1218-1222
• /
• 2006

The bolts fixing the valve cover to the engine were often reported to be failed in a wheel loader model. Recently this failures were continually repeated in the specified equipment. In order to identify the fatigue fractures of the bolts, various vibration tests were carried out. From these tests, it was found out that the failure was due to the resonance between the excitation force of engine and the transverse mode of engine valve cover. So, the several modifications for the bolts were considered to avoid the resonance. Finally, the bolt failure problem was clearly resolved.