• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1187-1193
• /
• 2011

In this paper, proposed controller preventing compressor surge and reducing the acceleration time of the fuel flow control system for turbo-jet engine. Turbo-jet engine controller is designed by applying fuzzy PID control algorithm and high-gain observer. Observer is used to estimate to compressor rotation speed of turbo-jet engine. Result of fuzzy inference is used as the fuel flow control inputs for preventing compressor surge and flame-out in turbo-jet engine. The controller is designed to converge to the desired speed quickly and safely. Using MATLAB to perform computer simulations verified the performance of the proposed controller.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.6
• /
• pp.61-71
• /
• 2003

In the study of control technique for a turbojet engine model, the Takagi-Sugeno fuzzy logic controller has been designed based on the model identification by the well designed PI controlled system through T-S neuro-fuzzy inference system. To enhance this designed controller, those procedures are proposed that certainty factors are adopted to each rule of objective groups which are classified by the fuzzy C-Means algorithm and the satisfaction degrees are matched to meet the objectives. This proposed technique shows its feasibility by upgrading performances of the previously well-designed T-S fuzzy controller.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.28-28
• /
• 2002

가스터빈 엔진을 운용하는 데 있어서 가/감속율을 크게 하면 엔진성능 천이 시간은 짧으나 압축기에서의 서지나 터빈 입구온도의 급격한 상승이 발생할 수 있으며 가/감속율을 작게 하면 엔진은 안정적이나 천이시간이 길어지게 되어 결과적으로 엔진의 동적 응답성이 나빠지게 된다. 또한 압축기에서 발생할 수 있는 서지를 방지하기 위하여 압축기 서지 마진이 l0%∼20%인 서지 한계선(조정선)을 설정하여 엔진이 서지 한계선을 넘지 않도록 제어한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1996.11a
• /
• pp.97-104
• /
• 1996

DYGABCD 프로그램을 이용해 선형모델의 구성에 필요한 시스템 행렬을 구하고 최소자승법을 이용하여 실시간 선형모사를 행한 후 DYNGEN 프로그램을 이용한 비선형 모사와 비교하여 그 타당성을 입증하였다. 그리고 가제어성과 가안정성을 시험하여 시스템에 대해 제어기설계가 가능한지 확인하고 엔진의 성능과 직결되는 터빈입구 온도의 Overshoot 제어를 위해 고전적 제어기법인 PI제어기와 현대적 최적제어기법인 LQR 제어기를 설계하여 각각의 성능을 비교해 보았다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.6
• /
• pp.1147-1155
• /
• 1989

본 연구에서는 정상모우드 운전조건에서 $O_{2}$ 센서의 단점을 극복할 수 있고 모델링 오차나 외란에 대하여 강인한 슬라이딩 모우드 제어방법을 적용하여 새로운 열료분사 제어기를 설계하고자 한다.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.284-285
• /
• 2017

본 논문에서는 슬라이딩모드 제어이론을 이용한 디젤엔진발전기의 가변속 제어기법을 제시한다. 부하의 변동에 대해 최적효율 운전점으로 동작시키기 위해 가변속이 필요하며 이를 위해 슬라이딩모드 속도제어기를 설계한다. 시뮬레이션을 통해 제어기의 성능을 검증한다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.6
• /
• pp.63-69
• /
• 2011

The Smart UAV must have the control characteristics of propulsion system necessary for both rotary aircraft and fixed wing aircraft though it equips turbo-shaft engine. To develop an electronic engine controller in the future, it is necessary to accumulate the experience of engine operation and data of tilt rotor aircraft. For this purpose, the computer programs which predict engine performance in the steady state and transient state can be utilized for the supplementation of flight test data. In this work, we developed a dynamic analysis program using engine performance data gathered during the flight tests. In addition the accuracy of the program was verified through comparison with flight test data and the results of steady-state performance analysis program.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.3
• /
• pp.99-106
• /
• 1998

The performance of the turbofan engine, a medium scale civil aircraft which has been developing in Rep. of Korea, was analyzed and the control scheme for optimization the performance was studied. The dynamic and real-time linear simulation was performed in the previous study The result was that the fuel scedule of the step increase overshoot the limit temperature(3105 $^{\cire}R$) of the high pressure turbine and got small surge margine of the high pressure compressor. Therefore a control scheme such as the LQR(Linear Quadratic Regulator) was applied to optimizing the performance in this studies. The linear model was expected for designing controller and the real time linear model was developed to be closed to nonlinear simulation results. The system matrices were derived from sampling operating points in the scheduled range and then the least square method was applied to the interpolation between these sampling points, where each element of matrices was a function of the rotor speed. The control variables were the fuel flow and the low pressure compressor bleed air. The controlled linear model eliminated the inlet temperature overshoot of the high pressure turbine and obtained maximum surge margins within 0.55. The SFC was stabilized in the range of 0.355 to 0.43.

• Journal of Advanced Navigation Technology
• /
• v.20 no.3
• /
• pp.190-195
• /
• 2016

In this paper, Propose to prevent compressor surge and improve the transient response of the fuel flow control system of turbojet engine. Turbojet engine controller is designed by applying Fuzzy-PID control algorithm. To prevent any surge or a flame out event during the engine acceleration or deceleration, the Fuzzy-PID controller effectively controls the fuel flow input of the control system. Fuzzy-PID results are used as the fuel flow control inputs to prevent compressor surge and flame-out for turbo-jet engine and the controller is designed to converge to the desired speed quickly and safely. Using LabVIEW to perform computer simulations verified the performance of the proposed controller. Response characteristics pursuant to the gain were analyzed by simulation.

• Journal of Advanced Navigation Technology
• /
• v.18 no.2
• /
• pp.107-113
• /
• 2014

In this paper, controller Propose to prevent compressor surge and improve the transient response of the fuel flow control system of turbojet engine. Turbojet engine controller is designed by applying Artificial Neural Network PID control algorithm and make an inference by applying Artificial Neural Network Error Back Propagation Algorithm. To prevent any surge or a flame out event during the engine acceleration or deceleration, the ANN PID controller effectively controls the fuel flow input of the control system. ANN PID results are used as the fuel flow control inputs to prevent compressor surge and flame-out for turbo-jet engine and the controller is designed to converge to the desired speed quickly and safely. Using MATLAB to perform computer simulations verified the performance of the proposed controller. Response characteristics pursuant to the gain were analyzed by simulation.