• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.9
• /
• pp.1-9
• /
• 1999

Liquid Petroleum Gas (LPG) has been widely used for commercial light-duty vehicles worldwide. Since LPG has a higher octane number and a lower maximum combustion temperature than gasoline , it becomes more popular fuel for reducing exhaust emissions. In tihs study, mathematical models of air intake and fuel delivery system are presented, and a PI-controller is designed for air-fuel ratio control. Hardware and software of an engine control module (ECM) are designed for an LPG engine. The ECM is built using a Motorola MC68HC05. In order to control the air-fuel ratio at stoichiometry, the PI-control algorithm is implemented in the ECM. The experiment results show the proto LPG ECM and its control scheme perform well to meet the stoichiometric air-duel ratio requirement.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.8-13
• /
• 2011

본 연구에서는 대형 로켓엔진시스템의 시동 시 안정적인 유량공급을 위한 제어기 설계가 이루어졌다. 펌프, 오리피스, 제어밸브, 파이프, 인젝터 및 재생 냉각채널과 같은 엔진시스템 구성품들에 대한 동특성 모델링을 수행하였고 유량공급 제어가 가능한 밸브의 구동신호를 조절 가능한 PID 제어기를 설계하였다. 시동 시 안정적인 유량공급을 위하여 실험을 통해 얻은 밸브의 적정 개도율을 적용시켰으며, 이를 기준으로 하여 제어밸브의 작동신호를 조절하여 유량비를 제어하였다. 시뮬레이션 한 결과 제어기를 통해 시동 시 정상추력까지 유량공급을 제어 하는 방법이 적절함을 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1371-1379
• /
• 2012

This paper presents a method for estimating the contribution of vibration sources in gasoline direct injection engine parts with a multiple-input system. A partial coherence function was used to identify the cause of the linear dependence indicated by an ordinary coherence function. To apply the partial coherence function to vibration source identification in the powertrain system of a gasoline direct injection engine, a virtual model of a two-input and single-output system is simulated. For the validation of this model, the vibration of the powertrain parts was measured by using triaxial accelerometers attached to the selected vibration sources-a high-pressure pump, fuel rail, injector, and pressure sensor. After calculating the partial coherence between each source based on the virtual model, the vibration contribution of the powertrain system is calculated. This virtual model based on the partial coherence function is implemented to determine the quantitative vibration contribution of each powertrain part.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.183-188
• /
• 2008

Engine control/performance model for helicopter simulator is one of the most important models which affect flight performance and handling quality. It is typical to develop the model based on the raw data and models from the engine designers/manufacturers. The approaches in this study were to develop the basic model based on the available resources and to tune and verify it based on the ground/flight test results. The maintenance manuals of TB3-117 which is installed in KA-32T were reviewed and the components to be simulated for the engine control model were categorized and modeled. Piece-wise linear modeling method was used for the engine performance model. The engine performance data in the engine maintenance manuals were incorporated into the engine steady state performance tables, which were incorporated with the transfer functions for the dynamic performance. Engine control/performance model was compared and tuned with the ground/flight test results. It was verified that the fidelity of the model was within the tolerances in FAA AC120-63.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.12
• /
• pp.2239-2246
• /
• 2008

Engine control/performance model for helicopter simulator if one of the most important models which affect flight performance and handling quality. It is typical to develop the model based on the raw data and models from the engine designers/manufacturers. The approaches in this study were to develop the basic model bated on the available resources and to tune and verify it based on the ground/flight test results. The maintenance manuals of TB3-117 which is installed in KA-327 were reviewed and the components to be simulated for the engine control model were categorized and modeled. Piece-wise linear modeling method was used for the engine performance model. The engine performance data in the engine maintenance manuals were incorporated into the engine steady state performance tablet, which were incorporated with the transfer functions for the dynamic performance. Engine control/performance model was compared and tuned with the round/flight test results. It was verified that the fidelity of the model was within the tolerances in FAA AC120-63.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.4
• /
• pp.50-60
• /
• 2019

This paper introduces the development of a toolbox for the Space Shuttle Main Engine(SSME) based on MATLAB/Simulink. A mathematical model of rocket engine creation and validation can be a complex process, the development of a rocket engine toolbox simplifies this process, thereby facilitating engine performance optimization as well as new design development. The mathematical modeling of the SSME dealt with in this paper is formed by 32 first-order differential equations derived from seven governing equations. We develop the toolbox for the SSME classifying each module according to the engine components. Further, we confirm the validity of the toolbox by comparing the results of the simulation obtained using the toolbox with those obtained using the original simulation of the engine.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.01a
• /
• pp.203-205
• /
• 2020

본 논문에서는 게임 엔진에서 사용되는 노말맵(Normal Map)의 원리와 그 응용 방식에 대해 연구하였다. 노말맵은 게임에서 하이 폴리곤 모델링에 적용되는 조명 적용 데이터를 로우 폴리곤에 적용할 수 있는 기술로, 하이 폴리곤 모델링의 벡터 방향 데이터를 텍스쳐로 저장하여 로우 폴리곤에 적용해서 벡터 방향을 텍셀단위로 조정할 수 있게 한다. 여기에서는 게임에서의 노말맵 저장 방식과 연산 방식에 대해 소개하고 이를 응용하여 최적화 시킬 수 있는 방법에 대해 연구한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.5-5
• /
• 1998

가스터빈 엔진은 민간 항공분야와 방위 무기의 발달과 더불어 성능이 향상되어 왔고, 그 역할도 증대하였다. 성능 향상과 역할 증대에 따라 처리하여야 할 일의 양과 그 속도가 증가하게 되면서 엔진 제어 난이도도 증가하고 제어기법도 향상되고 있다. 이에, 전자공학의 발달에 힘입어 전자식 엔진 제어기가 엔진제어의 임무를 수행하게 되었고, 근래에는 기체의 무게감소와 신뢰성 향상이라는 이중 이익을 위해 FADEC(Full Authority Digital Engine Controller)엔진 제어기까지 등장, 사용되고 있다. 가스터빈 엔진의 제어는 일반적으로 비선형 시스템에 관한 모델링 단계와 성능 해석결과를 이용한 보상기 설계 및 제어 단계의 3부분으로 크게 분류된다. FADEC이란 개념이 정착되기 이전에는 통상적인 제어 법칙인 PID(Proportional Integral Derivative) 방법이 사용되었으나, 시스템의 복잡화와 다변화에 의하여 modern control 개념이 고려된 새로운 제어 방법이 사용되기 시작하였다. 본 논문에서는 엔진 제어에 실제적으로 이용할 수 있는 제안된 제어 법칙을 이용하여 실제 엔진 모델에 적용하여 시뮬레이션 함으로써 새로운 제어 법칙이 엔진 제어에 적용 가능함을 보이고자 한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06a
• /
• pp.139-141
• /
• 2011

CDS 서비스는 검증한 임상가이드라인과 프로토콜을 임상 실무에 적용함으로써 의료의 질을 향상시키고, 비용을 절감할 수 있는 방법이다. CDS 서비스를 실무에 구현하기 위해서는 검증한 지식과 이를 실행할 수 있는 지식엔진이 필수적인 구현 컴포넌트이다. 본 논문에서는 지식의 상호운용성을 보장하는 임상가이드라인 모델링 방법으로 SAGE라는 의료지식표현 기법을 선택하고, SAGE 지식을 기존 엔진과 연계할 수 있는 방법으로 변환 방법을 제안하였다. 또한 변환을 통한 기존 지식엔진 활용의 가능성을 검증하기 위하여 변환의 정확성을 검증하였다.

• Journal of the Korea Society for Simulation
• /
• v.19 no.2
• /
• pp.51-62
• /
• 2010

Modeling and Simulation techniques are useful to construct executable battlefields and forces on computers, and have been utilized to analyze effectiveness of weapon systems in the computerized war environment. However, most weapon simulations so far have exhibited low reusability and extensibility, since they have been developed for specific simulation objectives with different structures and simulation engines. In this paper, we identify requirements for defense modeling and simulation activities and propose a simulation engine to support the identified requirements. We define the software architecture of the proposed engine, in a way to efficiently provide usability, component-based reusability, interoperability, and reuse-based development.