• Korean Journal of Food Science and Technology
• /
• v.32 no.6
• /
• pp.1278-1284
• /
• 2000

The study was performed to elucidate the effects of ethylene-absorbent on the quality of 'Fuyu' persimmon fruits in the MA package. Five persimmons were packed in a MA package film (low density polyethylene, 0.055 mm film thickness), and stored at $-0.5^{\circ}C$ for 60 days. Two persimmons were repacked in a MA package with or without ethylene absorbent $(1\;M\;KMnO_4+zeolite)$ and stored at $-0.5^{\circ}C$. Ten days later, these packages was moved to $2^{\circ}C$ or $25^{\circ}C$ storage room to examine the effect of the ethylene-absorbent on the quality of the fruits. Ethylene removal by enclosed ethylene absorbent in MA packaging reduced the rate of fruit respiration at $25^{\circ}C$, so that $O_2$ and $CO_2$ concentration in packing were maintained higher and lower, respectively, compared to control. These effects were not observed, however, in $2^{\circ}C$ post-storage. Fruit firmness and sugar composition were also influenced by ethylene absorbent, showing more delayed flesh softening and higher sucrose concentration in ethylene absorbent treated fruits than control. But ethylene-absorbent treatment lowered glucose and fructose concentration. That shows that ethylene could influence on sugar composition by inhibiting sucrose inversion to glucose and fructose. The production of ethanol and acetaldehyde was reduced by ethylene removal, but the effect was not so high as other quality indices.

• Applied Chemistry for Engineering
• /
• v.17 no.3
• /
• pp.260-266
• /
• 2006

For the synthesis of polyurethane memory foam stabilizer with fine cells, hydrosilylation reaction with various polyalkyleneoxides and hydrogen functional group of polymethylhydrogensiloxane (D = 75, D' = 15) was conducted. Polyalkyleneoxides (PAO) used in this research were ethylene oxides or ethylene-co-propylene oxides with terminal groups of hydroxides or methyl groups. To analyze the molecular structures and molecular weights as well as the reaction yields (98%), NMR and GPC analysis were executed. Synthesized siloxane surfactants modified with polyalkylene (EO = 12 units) were applied to producing flexible polyurethane fine memory foams from 0.6 pphp to 2.0 pphp. By controlling the amount of the surfactant, physical characteristics, the polyurethane memory foam with cell size (minimum $0.868{\mu}m$), air flows (-78 KPa), and recovery times (8 sec) were achieved.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.190-195
• /
• 1999

The thermal pyrolysis of chlorodifluoromethane (R22) for producting tetrafluoroethylene (TFE) has been studied using the tubular reactor designed by the authors. The reaction temperature over $600{\sim}850^{\circ}C$, residence time over 0.005~0.6 sec, and steam/R22 ratio 3 to 30 were varied through experiments to analyze the effect of these variables on the conversion of R22 and selectivity for TFE. We have provided the guidelines for the optimal operation and design for the pyrolysis reactor. With increasing the dilution ratio, not only the conversion of R22 but also the selectivity for TFE increase. The optimum range of reaction temperature was $700{\sim}750^{\circ}C$ and the residence time 0.07~0.1 sec. In the kinetic study, first order rate equation was fitted well with the experimental data. This indicates that the main reaction step is a $CF_2$ generation from R22 pyrolysis. The range of activation energy for the rate constant was obtained 44.7~48 kcal/mol.

• Polymer(Korea)
• /
• v.28 no.4
• /
• pp.328-334
• /
• 2004

A series of methoxy poly(ethylene glycol) (MPEG)-poly(L-lactide-co-glycolide) (PLGA) diblock copolymers were synthesized by ring-opening polymerization of L-lactide and glycolide with carbitol (134 g/mole) or different molecular weights of MPEG (550, 2000, and 5000 g/mole) as an initiator in presence of Sn(Oct)$_2$. The properties of diblock copolymers were characterized by using $^1$H-NMR, GPC, and XRD. After uniform mixing of block copolymers and 1% albumin bovine-fluorescein isothiocyanate(FITC-BSA) with a freeze miller, the wafers loaded FITC-BSA were fabricated by using a mold with a dimensions of 3 mm${\times}$1mm diameter. The release profiles of FITC-BSA and the pH changes of wafer were examined using pH 7.4 PBS for 30 days at 37$^{\circ}C$. The release profiles of albumin showed fast initial burst as the molecular weights of MPEG increased. As a result of this study, the release behavior of BSA was controlled with introducing MPEG in the block copolymers.

• Clean Technology
• /
• v.13 no.1 s.36
• /
• pp.79-84
• /
• 2007

Separation of ethylene from ethane and propylene from propane have been conducted using facilitated olefin transport membrane with SPEEK-Ag (Ag substituted sulfonated poly(ether ether ketone)). SPEEK was prepared by the sulfonation of PEEK using cone. $H_2SO_4$ and the reaction time affected the degree of sulfonation (DS) of the resulting SPEEK. SPEEK-Ag composite membrane was formed by soaking SPEEK in the polyester support into the Ag salt solution. With increasing the concentration of SPEEK in MeOH, the thickness of SPEEK on the polyester increased. The selectivity and the flux of SPEEK-Ag membrane for the separation of ethylene/ethane and propylene/propane were changed by the thickness of SPEEK layer on the top of polyester support. The anion of silver salt also affects the membrane performance.

• Journal of Adhesion and Interface
• /
• v.2 no.4
• /
• pp.24-31
• /
• 2001

Polypropylenes(PP) with different melt index values were mixed with ethylene-propylene rubber(EPR) or ethylene-propylene diene monomer rubber(EPDM) and an ethylene copolymer containing carboxylic acid group in a twin screw extruder. Then test specimens were prepared from the pellets of the blends with an injection molding machine. The mechanical properties and morphology of fractured surfaces were measured. Relative peak intensities of carboxylic acid group on the specimen surface were measured with an attennuated total reflection infrared spectrometer (ATR-IR) and compared with each other. The blend specimens were found to have the gradient morphology of rubber domains in PP matrix in the core region and PP skin layer. The blends containing PP of higher melt index showed greater content of ethylene copolymer containing carboxylic acid on the surface when the relative peak intensities of ATR-IR for carboxylic acid were compared. As the melt index values were increased, the decrease tendency in mechanical propeties such as tensile strength and impact strength was more significant for PP/EPR blends than PP/EPDM blends.

• The Science & Technology
• /
• s.501
• /
• pp.46-49
• /
• 2011

나프타분해기술이란 석유화학산업의 기초 원료인 경질올레핀(에틸렌, 프로필렌)을 생산하기 위한 기술로서 철강산업에서 제철산업이 하는 역할을 화학산업에서 한다고 볼 수 있다. 즉, 각종 합성수지 및 화학제품을 생산하기 위한 기초화학원료를 만드는 기술이다.

• 월간산업보건
• /
• s.186
• /
• pp.27-35
• /
• 2003

본 분석기법은 유해인자별 작업환경측정 및 특수건강진단 시료를 분석할 때 간편하게 활용할수 있는 방법으로 산업보건관련 유관기관에 실질적인 도움을 주고자 합니다. 이 분석기법들 중에는 공식적으로 검증, 채택되지 아니한 기법이 있음을 알립니다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.737-742
• /
• 2016

We prepared five different ethylene-propylene copolymers (EPCs) for use as the encapsulant of a photovoltaic module. All of the polymers were of commercial grade from ExxonMobile company and had different ethylene/propylene compositions. The crystallization behaviors and crystal structures of the polymers were analyzed by differential scanning calorimetry and wide angle X-ray scattering diffractometry, respectively. We observed the general trend that the degree of crystallization, density and glass transition temperature of the EPCs decreased with increasing ethylene content. However, an unexpected result was also observed: the EPC with the highest ethylene content (22.2 mol. %) showed the highest melting temperature. As a result, the EPC with 22.2 mol. % of ethylene shows the highest light transmittance, due to its having the lowest degree of crystallization and highest thermal creep resistance. This abnormal result is attributed to the blocky structure prepared by ExxonMobile's special catalyst technology. It was also observed that new additional melting peaks appeared as the crystallization time increased. Using wide angle X-ray scattering diffractometry, it was confirmed that these additional peaks originated from the formation of a new crystal structure caused by annealing.

• Applied Chemistry for Engineering
• /
• v.32 no.5
• /
• pp.547-555
• /
• 2021

A catalyst-plasma reactor was applied to the storage of agricultural products, e.g., apple and kiwi, to remove the ethylene generated during the storage. Two 1-m³ unit containers were prepared, and the long-term storage stability of the control group at room temperature was compared with that of the experimental group of which the produced ethylene was treated by the catalyst-plasma reactor. In case of the experimental group, a small amount of ozone was injected to the unit container to suppress the growth of microorganisms such as mold. The apples and kiwis were stored at room temperature for 50 and 57 days, respectively, and the changes in ethylene concentration, hardness, sugar content, acidity, and loss rate were compared. The ethylene concentration during the storage for the control group was higher than that for the experimental group, indicating that the ethylene was effectively removed. Hardness, sugar content, and sugar acid ratio after the storage were better than before the storage, and in particular, the storage stability of kiwifruit was improved significantly. In addition, after the storage, the loss rates of apples and kiwis in the control group were 10 and 54.1%, respectively, but the loss rates in the experimental group were 6 and 34.8%, respectively. Therefore, the storage stability of the experimental group was a lot better than that of the control group.