• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.3
• /
• pp.176-181
• /
• 2017

This study attempted to examine a method of anti-freezing on a plate-type heat exchanger in a low-temperature environment. Freezing condition was observed after ultrasonic waves were generated. Data were recorded to determine the optimal conditions for freezing. Ethylene glycol, which is commonly used in antifreeze formulations, was used as the brine, and the temperature was varied between -8 and $-16^{\circ}C$. The water for freezing provided by the thickness of 1-3 mm. In addition, experiments were conducted by adjusting the output to identify the changes that occurred due to the incidence of ultrasonic energy. The results of the anti-freezing effect were brine temperature, freezing thickness, and frequency band of ultrasonic waves.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.237-238
• /
• 2009

1999년 Zwilling 등은 타이타늄과 타이타늄 합금위에 불산을 포함하는 산성 전해질에서 양극산화 방법에 의해 $TiO_2$ 나노튜브를 형성시켰다. 그러나 HF의 강한 용해성으로 인해 튜브의 길이를 500 nm이상 성장 시킬 수 없다는 문제점을 가지고 있었고 그 후에 HF대신에 전해질에 $NH_{4}F$를 혼합하여 pH를 조절하는 방법으로 $TiO_2$가 용해되는 속도를 감소시켜 약 $2{\sim}4$배 더 크게 성장 시킬 수 있다고 보고한 바 있지만 수 ${\mu}m$ 이상의 길이로는 성장 시킬 수 없다는 한계를 가지고 있었다. 최근에는 불소이온을 포함하는 점액질의 유기전해질에서 높은 종횡비, 40-60 nm의 작은 기공직경과 매끄러운 튜브벽을 가지는 수 um이상의 나노튜브를 성장 시키는 보고가 있으나 $TiO_2$ 나노튜브의 제조에 영향을 미치는 파라메타에 대한 연구가 아직 많지 않은 실정이다. 따라서 본 연구에서는 전해질의 구성, 전압, 양극산화 시 교반의 영향에 대해 조사하였다. 불산과 에틸렌글리콜 전해질에서 형성된 $TiO_2$ 나노튜브의 비 표면적의 차이를 조사했고 튜브의 길이와 기공크기도 양극산화 시 인가전압과 전해질 구성에 따라 다른 것을 확인할 수 있었다. 이는 포어 바닥에서 국부적인 산성화를 유발하는 타이타늄의 가수분해와 $TiO_2$의 용해는 산화피막층의 용해작용을 증가시키는 수소이온의 농도를 증가시고 그에 따라 인가접압이 증가함에 따라 전해질 내의 이온수송을 활발하게 하기 위한 구동력이 증가해 전류밀도가 높아지는 것으로 확인되었단. 또한 양극산화 동안 전해질을 교반 한 경우 그런지 않은 경우에 비해 전해질 내의 유속(mass flow)를 증가시켜 더 긴 나노튜브를 얻을 수 있었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.133-133
• /
• 2017

[서론] Pure Ti 및 Ti합금의 양극산화법에 의해 만들 수 있는 자기조직화된 나노튜브피막은 광촉매, 태양전지 등 다양한 분야에서 많은 연구가 되고 있다. 양극산화법에 의해 생성되는 산화피막층의 성장거동에 대해서 지금까지 용액의 pH, 온도 및 인가전압 등 양극산화조건의 영향에 대해 많은 연구가 보고 되었다. 하지만, 양극산화에 사용되는 기판의 특성에 대해서는 많은 연구가 이루어지지 않고 있다. 본 연구에서는 pure Ti 및 Ti-Ni합금에 양극산화법에 의해 생성하는 나노튜브 피막층의 성장거동에 대해 기판의 특성(Ni농도 변화 및 phase변화)이 피막층의 형태 및 성장거동에 미치는 영향에 대해서 조사 하였다. [실험방법] Sample은 pure Ti 및 Ti-xNi(x=49.0, 51.1, 52.2, 52.5 at.%)를 이용하였다. Ti-Ni합금은 아크용해로 제작 후 $1000^{\circ}C$ 에서 24시간 균질화 처리 후 20% 냉간압연을 하였다. 합금의 조성 및 결정구조 분석은 EPMA 및 XRD를 통해 조사 하였고, 양극산화는 미량의 물 및 불화암모늄을 포함한 에틸렌글리콜 용액에서 20, 35, 50V 20분간 실시하였다. 양극산화법에 의해 형성한 산화피막층은 FE-SEM 및 TEM을 통해 관찰 하였다. [결론] Pure Ti의 경우 모든 조건에서 나노튜브형태의 산화막이 형성되는 것을 알 수 있었다. 하지만, Ti-Ni 합금의 경우 20V, 35V에서는 sponge 형태의 산화막이 형성되고, 50V에서만 나노튜브형태의 산화막이 형성 되었다. 또한, 모든 시편에서 양극산화 시간이 증가함에 따라 나노튜브형태의 산화막은 sponge 형태로 구조적 변화가 일어나는 것을 알 수 있었다. 그리고, 기판 Ni농도가 증가 함에 따라 형성되는 산화막의 형태 변화는 가속화 되는 것을 알 수 있었다. 이러한 결과는 양극산화 초기 Ti의 우선적 산화에 의해 Ti과잉의 나노튜브층이 생성되고, 동시에 산화막과 합금계면에 Ni과잉층이 형성되는 것을 알 수 있었다. 산화막과 합금계면에 생성된 Ni과잉층에 의해 양극산화 시간이 증가함에 따라 sponge형태의 산화막이 생성되는 것을 알 수 있었다.

• Tribology and Lubricants
• /
• v.28 no.6
• /
• pp.315-320
• /
• 2012

For proper functioning, general machines usually need lubricant oil as a cooling, cleaning, and sealing agent at points of mechanical contact. The quality of lubricant oil can deteriorate during operation owing to various causes such as high temperature, combustion products and extraneous impurities. In this study, a heavy load stopped during operation, and the oil was analyzed to check whether any impurities were added. Extraction using acetonitrile followed by reaction with BSTFA(bistrimethylsilyl trifluoroacetamide) showed that, trimethylsilylated ethylene glycol was present in the lubricant oil. To quantify the ethylene glycol in the oil, deuterium-substituted ethylene glycol, which acted as an internal standard, was added to the sample and then extracted with the solvent. Next, the extract was reacted with the derivatizing agent(BSTFA) and then analyzed with GC/MS. The detection limit of this method was found to be $0.5{\mu}g/g$ and the recovery of oil containing $20,000{\mu}g/g$ of ethylene glycol was measured to be 94.8%. A damaged O-ring and eroded cylinder liner were found during the overhaul, which implied the leakage of coolant containing ethylene glycol into the lubricating system. The erosion of the cylinder liner was assumed to be due to cavitation of the coolant in the cooling system.

• Journal of the Korean Chemical Society
• /
• v.36 no.6
• /
• pp.947-954
• /
• 1992

Polyethylene glycol (PEG) grafted poly (γ-benzyl L-glutamate) (PBLG) was synthesized by the substitution reaction of PBLG and PEG having primary amino groups at both ends. PEG-g-PBLG films containing hydroxyl group were also prepared by the substitution reaction of PEG-g-PBLG film and ethanolamine (EA). Adhesion of platelets and activation of plasma proteins on the copolypeptide films were studied. The results showed that platelets are less adhered and activated on the PEG-g-PBLG than on other polypeptides and plasma recalcification time (PRT) on the PEG-g-PBLG was longer than that on other polypeptides. These results were consistent with those of blood clotting time and thrombus formation on the polypeptides. As a results, PEG-g-PBLG surfaces showed better blood compatibility than PBLG or PEG-g-PBLG-EA surfaces.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.15 no.2
• /
• pp.79-85
• /
• 2017

Purpose: The purpose of this study is to evaluate the effectiveness and adverse effect of fomepizole in the management of acute ethylene glycol or methanol poisoning in children. Methods: Databases such as PubMed, Embase, Cochrane library, and KoreaMed were searched using terms related to fomepizole, ethylene glycol, methanol and pediatric. All studies, regardless of study design, reporting effectiveness or safety endpoints in children were included. Reference citations from identified publications were reviewed. Only reports written in English or Korean languages were included. The reference search was performed by two authors. Results: Twenty-two relevant literatures were finally included. They were one narrative review, 4 retrospective case series, and 17 case reports (19 cases). Case reports were classified as 5 fomepizole only, 8 fomepizole with other therapies, and 6 no fomepizole. All patients from the literatures were fully recovered without long term sequelae. Adverse effects of fomepizole were reported including anaphylaxis, thrombophlebitis and nystagmus. Conclusion: There are insufficient literatures regarding fomepizole treatment in children with ethylene glycol or methanol poisoning. The benefits or harms are not clearly established based on the clinical evidences. More prospective comparative studies are required in the future.

• Clean Technology
• /
• v.22 no.4
• /
• pp.241-249
• /
• 2016

In this study, comparative work has been performed between two-columns and three-columns configurations for an extractive distillation process to produce highly purified ethanol with not less than 99.7 wt% using dimethyl sulfoxide (DMSO) and ethylene glycol (EG) as extracting agents. Optimal ethanol concentration at a concentrator top stream which minimized the total reboiler heat duties was determined for a three-columns configuration for two different solvents. For the thermodynamic model, NRTL liquid activity coefficient model was used and PRO/II with PROVISION 9.4 at Schneider electric company was utilized. DMSO was proved to be a better solvent than EG and three-columns configuration is better than two- columns configuration in the total utility consumptions since some of the liquid water contained in the feed stream was removed at a concentrator bottom liquid stream.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.4
• /
• pp.257-263
• /
• 2015

Acoustic identification of inner materials in a single-layer cylindrical shell is investigated with acoustic resonance theory. The theoretical resonance peak frequencies for a cylindrical shell are little affected by the density variation, but remarkably changed by the sound speed variation of inner materials. Such acoustic dependency can be utilized to identify inner materials in a cylindrical shell. Acoustic resonance spectrogram for a single-layer cylindrical shell is theoretically plotted as functions of normalized frequency and sound speed of inner materials. The inner materials can be acoustically identified by overlapping acoustic resonance peaks from measured backscattering sound field on the spectrogram. To experimentally confirm this method, backscattering sound field of cylindrical shell filled with water, oil or ethylene glycol was measured in water tank. The inner materials could be identified by acoustic resonance peaks of the backscattering sound field monostatically measured with a transduce of 1.05 MHz center frequency.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.3
• /
• pp.83-91
• /
• 2003

The electrokinetic technique has been applied to remove mainly the heavy metal and the ultrasonic technique to remove mainly organic substance in contaminated soil. In this study, the combined electrokinetic and ultrasonic remediation technique was studied far the removal of heavy metal and organic substance in contaminated soils. This study emphasized the coupled effects of electrokinetic and ultrasonic techniques on migration as well as remediation of contaminants in soils. The laboratory soil flushing tests combining electrokinetic and ultrasonic technique were conducted using specially designed and fabricated devices to determine the effect of both of these techniques. A series of laboratory experiments involving the simple, electrokinetic, ultrasonic, and electrokinetic & ultrasonic flushing test were carried out. A soil admixed with sand and kaolin was used as a test specimen, and Pb and ethylene glycol were used as contaminants of heavy metal and organic substance. An increase in out flow, permeability and contaminant removal rate was observed in electrokinetic and ultrasonic flushing tests. Some practical implications of these results are discussed in terms of technical feasibility of in situ implementation of electrokinetic ultrasonic remediation technique.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.3
• /
• pp.283-289
• /
• 2016

In this study, electrochemical characterizations of PdCu/C catalysts that are synthesized by modified polyol method are investigated. Most of all, amount of ethylene glycol (EG) that is used as main component for catalyst synthesis is mainly modulated to optimize synthetic condition of the PdCu/C catalyst, For evaluations about catalytic activity and performance of direct formic acid fuel cell (DFAFC), half cell and full cell tests are implemented. As a result, when amount of EG is 4M, catalytic activities of the PdCu/C catalyst such as peak current of formic acid oxidation and active surface area are best, while maximum power density of DFAFC using the optimized PdCu/C catalyst is better than that using commercial Pd/C (30 wt%) by 6%. Based on that, PdCu/C catalyst synthesized by modified polyol method plays a critical role in improving (i) catalytic activity for formic acid oxidation and (ii) DFAFC performance by employing as anodic catalyst.