• 설비공학논문집
• /
• 제29권10호
• /
• pp.504-514
• /
• 2017

The insulation performance of aircaps has been recognized and various studies regarding the aircap as a solution to increased building energy consumption are being carried out. However, the aircap is not durable and therefore it cannot play the role of an independent finishing material. Accordingly, the purpose of this study is to suggest an aircap wall module with improved durability through the lamination of the aircap and verify its effectiveness by evaluating its energy saving performance for lighting and air conditioning through a full-scale testbed. The conclusions of this study are as follows. 1) The aircap wall module featuring a laminated aircap that is being proposed in this study can save lighting energy due to the permeability of the aircap in comparison to previous insulating materials. 2) The aircap wall module with a laminated aircap is effective in improving heating and air-conditioning energy saving when it is more than 15 cm-thick during summer and winter in comparison to a 5 cm-thick prefabricated panel. 3) The aircap wall module featuring a laminated aircap is effective in improving lighting and heating and air-conditioning energy saving when it is 10 cm- and 5 cm-thick during summer and winter, respectively, in comparison to a 5 cm-thick prefabricated panel.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.175-176
• /
• 2015

Insulation in buildings are one of the crucial factors for energy reduction, and depending on the application areas and properties of the insulation requirements, various different types of insulation materials are being developed, produced, and used. Amongst these is the aircaps often used as packing materials. Because of their porous nature, they are highly efficient in preventing heat and are consequently used overseas often as insulation materials and as part of cold water concrete insulation curing method. This paper studies the recently developed usage of aircaps in waterproofing materials and evaluated their performance as supplementary insulation materials.

• 한국항해항만학회지
• /
• 제28권5호
• /
• pp.429-434
• /
• 2004

본 논문은 순차적으로 전압 인가된 RF MEMS 스위치를 이용하여 재구성 슬롯 안테나를 설계하였다. MEMS 스위치의 구동전압은 하부 전극과 상부 스위치 사이의 에어캡 높이에 따른 스위치의 특성을 ANSYS 시뮬레이션으로 분석하였다. MEMS 스위치의 구동전압은 하부전극과 상부 스위치 사이의 에어캡 높이와 스위치 형상에 의해 결정된다. 설계된 MEMS 스위치의 길이는 각각 240$\mu\textrm{m}$, 320 $\mu\textrm{m}$, 400 $\mu\textrm{m}$ 이고, 에어캡은 6$\mu\textrm{m}$이었다. 설계된 슬롯 안테나는 전체크기가 10 mm x 10 mm이며, 슬롯의 크기는 길이가 500 $\mu\textrm{m}$, 폭이 200 $\mu\textrm{m}$이었다. 그리고 CPW 급전선은 전체의 길이는 5 mm이며, 입구에서의 CPW는 30-80-30 $\mu\textrm{m}$이괴, 슬롯에서의 CPW는 150-300-150 $\mu\textrm{m}$이다. 세안된 소사의 공진주파수의 튜닝은 RF MEMS 스위치에 DC 바이어스를 인가함으로서 안테나의 전기적인 길이를 변화시켜 이루어진다. 설계된 슬롯 안테나를 시뮬레이션, 제조 및 측정을 하였다.

• 한국건축시공학회지
• /
• 제15권1호
• /
• pp.9-16
• /
• 2015

친환경 건설 재료의 일환으로 고로슬래그 미분말을 다량치환한 콘크리트에 대해 재생골재를 이용해 잠재수경성 반응을 활성화 시켜 콘크리트로서의 활용방안 모색과 탄산화를 저감시킬 목적으로 다양한 기밀성 향상재를 표면에 부착하여 탄산화 저감효과를 측정하였다. 재생골재의 사용은 표면의 모르타르 및 미수화 시멘트로 인해 고로슬래그 미분말을 다량 치환한 콘크리트에 양호한 영향을 미친 것으로 판단되었다. 콘크리트 표면의 기밀성 향상재에 따른 탄산화 저감 효과는 기밀성 향상재 종류와 상관없이 콘크리트 표면에 효과적으로 부착되어 있는 경우라면 모두 양호한 탄산화 저감 성능을 나타내었다. 그러므로 시공이 용이하고 취급이 간편하며 콘크리트 표면에서 장기간 양호한 내구성을 발휘하는 기밀성 향상재로 선시공 1중 에어캡이 가장 양호한 방법으로 판단되었으며, 추가적으로 단열성능을 고려하였을 때에는 선시공 2중 에어캡이 효율적인 방법으로 생각해 볼 수 있었다.

• 설비공학논문집
• /
• 제29권11호
• /
• pp.559-569
• /
• 2017

Various studies examining how to conserve building energy have been conducted recently. From such studies it has been determined that insulation performance of an aircap is viable and therefore aircaps are used as material for improving insulation performance of windows. However, the aircap for improving insulation performance of a window is attached on the front, causing infringement of the prospect right. Therefore, the purpose of this study is to develop an aircap module attached to the window through rolling, conducting performance verification throughfull-scale testbed and verifying its effectiveness. Findings of this study are as follow : 1) The module suggested in this study enables setting of an area wherein the aircap is attached through rolling so that the aircap rolls up using Velcro tape, and an insulation bar is suggested to block the gap between the aircap and window glass. 2) When the aircap is applied to the window, consumption of lighting energy increased during summer and winter by 2.8%~16.4% and 0%~76.2% respectively in comparison to no aircap application, indicating that it is unsuitable for conserving lighting energy. 3) In terms of conserving cooling and heating energy, an advantageous or effective aircap attachment method is the method whereby an aircap is attached to the front surface of a window. However, the method whereby an aircap is attached to a part of a window and where no aircap is attached increases consumption of cooling and heating energy during summer and winter by 6.0%~35.7% and 2.7%~41.6% respectively in comparison to the method wherein an aircap is attached to the front surface of a window. 4) In consideration of conserving cooling, heating and lighting energy, the attachment of an aircap to the front surface of window is the most appropriate method, and it is appropriate to attach the aircap at a position that is 1,500 mm or higher from the floor to secure the prospect right and minimize energy loss.

• KIEAE Journal
• /
• 제17권1호
• /
• pp.63-68
• /
• 2017

Purpose: Various studies to solve the problem of increased energy consumption in the buildings are being carried out recently. Especially, the economic feasibility and insulation performance of the air-cap have been verified so that various studies regarding the reduction of building energy consumption have been carried out. However, previous studies regarding the air-cap were only carried out based on the verification of its insulation performance according to the size and attachment position of the air-cap. Therefore, the purpose of this study is to suggest a detachable air-cap module for improving the performance of the windows, evaluate the performance based on cooling, heating and light environments and verify its effectiveness through a real-scale testbed. Method: In this study, the energy saving performance in the circumstance where there is no attachment of an air-cap (Case 1), the circumstance where there is the attachment of air-cap on the glass surface of window (Case 2) and the circumstance where there is the attachment of an air-cap on the window frame (Case 3) were compared in order to verify the performance of the detachable air-cap module (Case 4), and the electricity consumption of cooling, heating and lighting equipment to maintain the appropriate indoor temperature and Illuminance for each case was calculated and utilized as indicators for the performance evaluation. Result: The result of this study is as follows. 1) In this study, the detachable air-cap module which was easily detachable through the principle of the magnet was suggested. 2) When Case 4 is applied, the electricity consumption of cooling and heating equipment can be reduced by 27.5%, 13.2% and 3.4% in comparison with Case 1, Case 2 and Case 3 respectively. 3) When the air-cap is applied to the window, the lighting energy consumption increases by 4 % in comparison to the non application of the air-cap, and this factor or aspect should be considered when applying the air-cap. 4) According to the performance evaluation result in consideration of cooling, heating and light environments, Case 4 demonstrates an energy saving ratio of 22.6%, 10.6% and 2.7% in comparison to Case 1, Case 2 and Case 3 respectively, indicating that it is effective for improving the performance of windows.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.346-346
• /
• 2009

저손실 고투자율 특성을 갖는 $\alpha$-Fe 나노결정 자심재료를 제조하기 위해 열처리 온도를 변화시켰으며 투자율과 신호전송 특성을 측정한 결과 $510^{\circ}C$에서 열처리된 자심재료에서 가장 우수한 특성을 얻었다. 저주파 대역에서의 신호전송 특성은 자심재료의 자기적 특성에 지배적인 영향을 받으며, 고주파 대역의 신호전송 특성은 임피던스 매칭으로 향상시킬 수 있었다. 에어-캡은 $500{\mu}m$ 이상 적용할 때, 100 A이상까지 안정적인 특성을 발휘하였다. 그리고 고역통과 필터의 설계와 신호결합장치에의 적용을 통해 통신대역 이외의 노이즈를 제거할 수 있었다.

• 한국자동차공학회논문집
• /
• 제1권1호
• /
• pp.110-119
• /
• 1993

본 논문은 자동변속기를 탑재한 차량에서 에어콘(air condition)을 작동시키고, 공 회전시 기어의 변속을 "D"단에 두었을 때 실내에서 발생하는 이상음의 원인규명 및 해결 방 법에 관한 연구 결과를 논하고자 한다. 이 이상한 소음의 원인을 규명하기 위하여 실린더 내부의 연소압력, 메인 베어링캡(main bearing cap)의 진동, 엔진 마운팅 보스의 진동 및 차 량의 실내소음을 동시에 측정하여 분석하였으며 이 결과에 의하면 이상음의 원인은 크랭크 샤프트(crank shaft)의 굽힘진동이 파워플랜트(power plant)를 가진하여 진동을 증가시키고, 이 진동이 마운팅 보스를 통하여 차량의 차체에 전달되며, 차체의 진동에 의해서 발생하는 고체 전달음(structure-borne noise)이었다. 또한 이상음의 주기는 주파수 성분은 200-400Hz 이었다. 이 이상음은 크랭크 샤프트의 댐퍼 풀리의 질량을 저감하여 크랭크 샤프트의 동특 성을 개선함으로서 해결가능하고, 혹은 점화시기를 지연하여 연소 압력을 낮춤으로서 해결 가능하다.

• 임상간호연구
• /
• 제26권2호
• /
• pp.232-239
• /
• 2020

Purpose: This study was an quasi-experimental study to compare the effect of applying polyethylene wrap and aircap in maintaining body temperature of preterm infants. Methods: The participants were 51 preterm infants. Aircap was applied to the experimental group (n=23) and polyethylene wrap was applied to the control group (n=28) when the preterm infants admitted to neonatal intensive care unit. The data was collected at W hospital in J-province from June 2016 to May 2017. A total of 9 body temperature measurements were taken at 3 hours interval from 5 min to 24 hours after admission. Repeated measure ANOVA, independent t-test and χ² test were conducted used with SPSS/WIN 24.0 Results: There were no significant difference in the homogeneity tests for general characteristics and dependent variables prior to the experiments (t=0.57, p=.566). There was a significant difference on body temperature of preterm infants over time (F=3.24, p=.020). There was no significant difference on body temperature between polyethylene wrap and aircap application groups (F=1.29, p=.261). The interaction between the group and the time was insignificant (F=1.51, p=.214). Conclusion: The findings demonstrated that both methods of applying polyethylene wrap and aircap on the body in preterm infants had effect in maintaining body temperature.

• KIEAE Journal
• /
• 제15권1호
• /
• pp.77-82
• /
• 2015

The purpose of this study is to compare the thermal insulation performance of windows according to the formation of air layer and to evaluate its energy efficiency on a selected standard house. A thermal insulation test, KS F 2278 was used to measure U-values (Heat transmission coefficients) for the following three cases: the first case (Case 1) is a Low-E pair glass (Argon injected), the second case (Case 2) is a Low-E pair glass with the air cap attached on the glass surface, and the third case (Case 3) is a Low-E pair glass, on the frame of which the air cap is attached. The evaluation of the energy efficiency was conducted according to a building energy calculation method from ISO 13790, calculation of energy use for space heating and cooling, using the U-values obtained from the thermal insulation tests. As results of the tests, the U-values of Case 1, Case 2, and Case 3 were $1.668W/m^2{\cdot}K$, $1.568W/m^2{\cdot}K$, and $1.319W/m^2{\cdot}K$ respectively. The Case 2 had about 5.9% lower value than the Case 1, and the Case 3 had about 20.9% lower value than the Case 1. It seems that the thermal performance of the windows is attributed to an increase of the heat resistance and the thickness of air layer. An evaluation of the energy efficiency of the three cases on the selected standard house showed that the amount of heating energy demand per unit area was $7.776kWh/m^2{\cdot}yr$ for the Case $1,6.856kWh/m^2{\cdot}yr$ for the Case 2, and $4.856kWh/m^2{\cdot}yr$ for the Case 3. This study suggests that the formation of air layer (by using air cap) and its thickness should reduce the heat energy demand and thus improve the energy saving efficiency