• Journal of the korean Society of Automotive Engineers
• /
• v.18 no.5
• /
• pp.1-9
• /
• 1996

에어백 관련기술은 차체 충돌특성 평가, 승객거동분석, 좌석벨트/조향축/에어백의 조화설계 등을 포함하는 시스템 엔지니어링 기술과 충돌감지센서, 가스발생기, 모듈 등을 포함하는 주요 기능 부품의 설계 및 제조기술로 구분된다. 이 중 시스템 엔지니어링 기술은 국내의 완성차 업계의 노력에 의하여 선진국의 수준에 근접하고 있으나 부품의 설계 및 제조기술은 매우 취약한 상황이다. 80년대 후반부터 각국의 에어백 관련 특허 출원 건수가 급증하고 있으며 새로운 기능의 부품들이 속속 개발되고 있다. 에어백 기술의 발전방향은 소형화, 경량화, 저렴화로 요약된다. 차량의 전방 충돌에 대비한 에어백이 주종을 이루고 있으나 측면 충돌에 대비한 side bag, 뒷자석 승객을 보호하기 위한 rear bag 등이 개발되고 있고 최근에는 버스 등 대형차량이나 모터사이클 등에도 에어백을 부착하기 위한 연구가 추진되고 있다. 에어백은 충돌센서(crash sensor), 가스발생장치(inflator), 공기주머니(bag), 덮개(cover), 배선(wire harness) 등으로 구성된다. 이들 중에서 공기주머니, 덮개, 가스발생장치를 결합한 부분 조립품을 모듈(module)이라고 부르고 있다. 이하에서는 에어백을 구성하는 주요 기능부품들의 종류, 특성과 기술개발 동향을 알아보기로 한다.

• Journal of Korean Society of Transportation
• /
• v.21 no.2
• /
• pp.7-16
• /
• 2003

To minimize the death and injury by a collision, the installation of an air bag is recommended as a mandatory practice together with the wearing of the seat belt. By using simulated collision experiments, this research focused on the effect of an air bag and seat belt on the driver safety. The vehicle deceleration characteristics were obtained from impact experiment. LSDYNA, a software program for vehicle collision analysis, and MADYMO. a software program for driver motion after collision, were used for simulated experiment. Four cases such as air bag installed and seat belt wearing (case A), air bag installed but seat belt not wearing (case B), air bag not installed but seat belt wearing (case C), air bag not installed and seat belt not wearing (case D) were analyzed. The impact of acceleration on the injury of driver's head was analyzed by Head Injury Criterion (HIC) as well. It was found that having air bag and wearing seat belt effectively reduced driver's head injury about 52.9% to 70.5% compared with the case of having neither air bag nor wearing seat belt.

• Journal of the korean Society of Automotive Engineers
• /
• v.17 no.2
• /
• pp.14-23
• /
• 1995

여기에서는 에어백의 수학적인 모델과 유한요소 모델에 대한 모델링 기법과 이에 대한 발달과정을 간략하게 고찰하고 설계에의 적용 예를 들어, 승객거동해석 시뮬레이션 및 설계를 에어백을 중심으로 서술하고자 한다. 1. 에어백 모델링 발달과정. 2. 에어백의 모델링에 관한 고찰. 3. 승객거동해석 시뮬레이션. 4. 설계의 적용 예. 5. 향후 전망.

• Journal of the korean Society of Automotive Engineers
• /
• v.13 no.5
• /
• pp.1-12
• /
• 1991

선진국에서 승용차의 에어백 장착이 의무화되기 시작하면서 저렴하고 성능이 우수한 에어백의 국산화 개발이 시급하게 되었다. 에어백 장착시 대당 $300-$1000이 추가로 소요되므로, 전량 수입에 의존하는 대신에 저렴한 국산 에어백의 필요성이 심각하다 하겠다. 지금까지는 국내 자동차 업계에서의 에어백에 대한 관심이 높지 않으나 앞으로는 이에 대한 연구개발이 시급한 실정이다. 본 연구에서는 에어백 개발에 있어서 중요한 기본 기술에 대한 survey가 행하여지며, 앞으로 산업체 등에서 제품 개발시 실질적인 도움을 줄수 있을 것으로 생각한다.

• Journal of Aerospace System Engineering
• /
• v.16 no.1
• /
• pp.28-39
• /
• 2022

With the development of small multicopter PAV (Personal Air Vehicle), it is necessary to develop safety-related devices for manned rotorcraft. In this study, we assumed that an external airbag can be installed in a small multicopter PAV, and using LS-DYNA's Airbag Folding Application, we performed a free-fall collision analysis by modeling the airbag shapes consisting or Roll, Zigzag, and Sigma. There was no significant difference in the final airbag deployment time of the three models. However, when it collides with the ground during deployment, the Sigma fold type external airbag had the fastest deployment speed, applying the most impact force to the PAV, while the Roll fold type external airbag applied the smallest impact force to the PAV.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.5696-5703
• /
• 2012

In this study, the characteristics of filter that make up the automotive airbag system were analyzed. The gas pressure change of airbag is directly impacted by the filter. However, it is uncertain how much the design factors of filter affect the pressure of airbag. And it is difficult to access the pressure loss coefficient in the respect of characteristics of the airbag filter in the simulation method. To solve this problem, this study suggests pressure loss coefficient of the filter using simulation analysis. But it is impossible to interpret a sudden increase of pressure such as airbag filter. To solve this problem, by applying interpolation and scale down method, analysis was processed. Also, through the simulation interpretation of airbag filter's pressure loss coefficient, the guidelines for the filter design could be suggested.

• Journal of the korean Society of Automotive Engineers
• /
• v.22 no.2
• /
• pp.27-34
• /
• 2000

• Journal of the Korean Institute of Gas
• /
• v.16 no.6
• /
• pp.102-106
• /
• 2012

The purpose of this paper is to study the failure cases in relation to system of Air Bag in vehicle happened in the field. In the first example, it was separated the soldering parts connected the wire pin between air bag module and clock spring of air bag. Whenever the pin shake by the car's vibration, the driver verified the malfunction phenomenon appeared air bag warning lamp on instrument panel in front of driver's seat. in car inside room. The second example, it verified the warning lamp lighting phenomenon of air bag by produced the circuit plate non-contacting of single an element in air bag electronic control unit. The third example, it verified the light of air bag warning indicator lamp by separated with soldering parts connecting inner pin and resistance terminal of seat belt pretensioner using passenger seat. The fourth example, when the passenger car crash a back of truck, the former bumper get jammed under the latter as the roof height of car low less than that. Therefore, the impact of Car's collision verified that don't transfer with body frame of vehicle because of no attachment impact sensor in it.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.6
• /
• pp.236-246
• /
• 1996

The deployment process of fully folded airbag is analyzed. The methodology of finite element modeling is presented for flat driver side airbag and 3-dimensional passenger side airbag. 'Initial metric option' is used to model 3-dimensional passenger side airbag before deployment. The deformed shapeds and pressure waveforms inside cushion evaluated from simulation are compared to the test results. The agreements between the simulation and the experiments are satisfactory, and the results of simulation are confirmed to be applied to the design of airbag module.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.1
• /
• pp.129-135
• /
• 2013

There is not enough absorption space in the side of a vehicle so injuries to a passenger are higher compared to frontal impact injuries. For the protection of the passenger in the event of a side impact, vehicle regulations and new car assessment program(NCAP) are implemented all over the world. However, passive safety such as absorption technology of vehicle body itself is limited due to the narrow space of the side part. At the present time, it is well known that a side airbag including a curtain airbag is the most effective system to protect the passenger during a side impact. In this study, optimum design of the curtain airbag is carried out to reduce Head Injury Criterion(HIC) of the passenger. Based on crashworthiness simulation, an orthogonal array is selected based on the defined design variables, the response surfaces are generated from the orthogonal array and optimization is conducted with the surfaces.