• Proceedings of the KSEE Conference
• /
• 2008.10a
• /
• pp.17-28
• /
• 2008

국책사업이나 SOC의 확충을 위한 도로 및 철도의 건설에서 적용되는 터널의 단면크기를 보면, $50m^2$에서부터 $100m^2$이상의 중 대단면 터널이 주를 이루고 있으나, 전력구, 통신구, 소규모로 운영되는 광산의 채광용 터널, 용수를 위한 도수로터널 등 특수한 용도로 설계, 시공되고 있는 터널에서는 $20m^2$이하의 단면크기를 갖는 경우가 있다. 이러한 소단면 터널의 경우에는 협소한 작업공간으로 인하여 적용공법 뿐만 아니라 장비의 사용 또한 제약을 받게 되어 작업효율이 저하되고 공사기간이 늘어나게 되는 등 여러 가지 문제점을 안고 있다. 특히, 에멀젼 폭약을 사용하는 발파에서 먼저 기폭된 발파공의 충격압력에 의해 인접공의 폭약이 예비압축(Precompression)되어 사압현상을 일으키고 잔류약을 발생시키는 사례가 종종 발생하고 있다. 사압현상은 당해 발파의 실패와 함께 2차적인 사고의 위험요인이 될 수 있으므로 이를 방지하기 위한 대책을 수립하여야 한다. 이를 위해 기존 문헌을 통하여 사압현상의 원인과 발생 가능성을 검토하였고, 국내에서 주로 사용되는 에멀전폭약의 수중 내충격성시험과 충격압력 전달시험을 실시하여 사압현상의 발생정도를 측정하였으며, 사압현상이 발생한 소단면 터널현장을 대상으로 대책을 수립하여 적용하였다. 심발방법을 변경하여 전단의 충격압력을 견딜 수 있는 공간격을 확보하고 뇌관의 초시간격을 적절하게 배치한 발파패턴을 적용한결과, 사압현상을 억제하고 잔류약의 발생을 감소시켜 계획 굴진장을 확보하고 파쇄석의 크기를 감소시키는 등 양호한 결과를 얻을 수 있었다.

• Bulletin of Food Technology
• /
• v.24 no.3
• /
• pp.308-324
• /
• 2011

나노기술을 식품에 응용하게 되면 영양소의 전달, 식품의 색, 향미, 물성 등이 향상되고 식품 포장재나 분석에 응용하는 경우 저장성 증진이나 시료 전처리 효율 및 기기 감도를 증가시키는 것으로 알려지고 있다. 이러한 장점으로 인해 유기 및 무기 나노입자, 나노섬유, 나노에멀전, 나노크레이 등의 나노물질을 식품첨가물, 건강기능소재, 식품 접촉물질 등으로 응용하는 시도가 식품산업계에서 급속히 확산되고 있다. 나노물질의 사용범위가 다양해질수록 나노물질의 환경 및 인체 노출가능성은 높아지게 된다. 그러나 아직 나노물질의 독성 및 위해성에 대해서는 초기 단계 수준의 연구가 진행되고 있는 정도이다. 또한 나노기술의 위험 평가에 대한 신뢰성이 제고될 수 있도록 나노물질에 대한 유해성 자료의 생산뿐만 아니라 나노물질의 물리화학적 특성과 노출량을 측정할 수 있는 적절한 측정수단이 확립되어야 한다. 나아가 식품에 나노기술의 적용으로 인한 이익은 최대화하고 부작용은 최소화하여 소비자의 건강을 보호하기 위해 식품나노물질의 생산, 가공, 유통, 소비, 폐기 등에 관한 전 생애(lifecycle) 평가 및 관리가 이루어지도록 적절한 제도적 장치가 마련되어야 한다.

• Journal of Digital Convergence
• /
• v.13 no.8
• /
• pp.369-374
• /
• 2015

In this study, by combining a unique purpose and additional aspects of ultrasonic transmission media, a development potential on a new ultrasonic transmission media was sought. The rheological characteristics and the manufacturing cost for each manufactured formulation were compared and analysed with ready-made. An ultrasonic transmission media is to have different functional characteristics according to the following formulation, it was the best in rheological value, low viscosity emulsion with the oil gel. Polymer hydro gel is can be manufactured at low cost compared to other formulations. Emulsion which shows a sharp viscosity difference according to the components of oil and water had a big difference in manufacturing cost. This study can be utilized as the fundamental data on the ultrasound transmission media equipped with expertise in various areas of ultrasound.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.7
• /
• pp.439-445
• /
• 2015

We established the emulsion method using membrane filter with precise control of LC droplet distribution in PDLC. PDLC cells with various LC droplet size distributions such as single droplet sizes of $1.0{\mu}m$, $1.9{\mu}m$ and $3.5{\mu}m$, the mixture of two different LC droplet sizes and the mixture of three different LC droplet sizes were fabricated and the electro-optical properties of the emulsion type PDLC cells with various droplet size distribution were investigated. In the appropriate droplet size range, the PDLCs with the single droplet sizes distributions have good electro optical properties than those with the mixture of three different LC droplet sizes. In addition, the PDLC cells with the mixture of two different LC droplet sizes have the better electro optical properties than those with single droplet sizes distribution. The PDLC cell with dual droplet size distribution of $1.0+1.9{\mu}m$ shown the best electro optical properties than the PDLC cells with other size distributions. This method enabled us to find the proper LC droplet size distribution for achieving both high transmittance and contrast ratio.

• Explosives and Blasting
• /
• v.36 no.1
• /
• pp.20-33
• /
• 2018

A locally damaged structure is a structure that cannot be reused due to having parts that have lost their structural function as a result of abnormal load across the interior or exterior of the structure. The causes of the abnormal load occurrences can be classified into natural disaster and artificial disaster. Locally damaged structures caused by this abnormal load have risk factors that may lead to the possibility of additional secondary collapses, so such structures require immediate and complete dismantling. The case presented in this study involves the application of explosive demolition to a steel truss structured bridge in the Philippines that was damaged due to construction failures and the hurricane. Although shaped charges were needed in explosive demolitions, difficulties in locally obtaining such material. So, we made a charge container to charging of emulsion explosive during the explosive demolition. The explosive demolition resulted in the vertical free fall of the mid-section of the bridge and the free fall rotating of the both end section of the bridge. The neighboring posts and bridge piers did not show signs of damages, while post-demolition fragmentation of removed parts was found to be satisfactory.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.4 s.48
• /
• pp.549-553
• /
• 2004

ATP bioluminescence system and impedance system were evaluated with the objective of reducing the time for microbial analysis of cosmetics formulations from 72 to 24 h. The meaningful correlation (at least $95\%$) was achieved when emulsion were artificially contaminated with low levels of different organisms, including Pseudomonas aeruinosa, Staphylococcus aureus, Escherichia coli and Ralstonia mannitolilytica. The standard agar plate method, ATP bioluminescence and impedance method were used for in this study. Successful evaluation and validation of automated systems has enabled the introduction of ATP bioluminescence and impedance method into routine use within the microbiology laboratory. This has provided a rapid assessment of product quality, resulting in faster throughput and resource maximization.

• Applied Chemistry for Engineering
• /
• v.8 no.3
• /
• pp.510-516
• /
• 1997

O/W emulsions were prepared by adding water to the solution containing amphiphilic resin and the mixed emulsifier of cetyl alcohol polyoxyethylene(20) sorbitan monooleate. Phase behavoir of these emulsions was studied at various HLB(Hydrophilic Lipophilic Balance) values and temperatures. The polar oil emulsion containing the amphiphilic resin showed improved phase stability at various temperatures. Model compounds which contain one of the functional groups in the amphiphilic resin were used in the polar oil phase in order to study the effect of interaction between the functional group and the emulsifier on the phase stability of emulsion. These model compound emulsions showed the phase stability order of poly(acrylic acid)

• Explosives and Blasting
• /
• v.24 no.1
• /
• pp.29-37
• /
• 2006

The demand of the bulk emulsion explosives is being increased more and more by using the mechanization loading system in a domestic tunnel sites. Thus, a rational design criteria that is suitable for rock and circumstance condition has been required. In this study, authors investigated a optimum specific charging weight and resonable charging weight based on domestic blasting construction cases, which were performed by using a mechanization bulk emulsion explosives loading system up to now. Authors also analyzed the blasting results and got the following formula $({\Upsilon}= 0.669 + (0.0154{\times}RMR),\;r=0.81)$ from the relationship between a optimum specific charging weight of bulk exp. and rock mass rating. A range of resonable charging weight with a drilling depth is calculated considering a rock conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.555-562
• /
• 2019

This study was undertaken to develop a stable self-microemulsifying drug delivery system (SMEDDS) for trans-cinnamaldehyde, a known antibacterial and antifungal agent. A simultaneous analytical method was established for quantification of trans-cinnamaldehyde and its degradant, cinnamic acid. Various surfactants were applied to assess their effect on the aqueous solubility of trans-cinnamaldehyde, and pseudo-ternary phase diagrams were plotted. Of the various formulations tested, the liquid SMEDDS composed of trans-cinnamaldehyde (oil), Cremophor EL (surfactant) and Transcutol P (cosurfactant) at a volume ratio of 10/70/20, produced the smallest emulsion droplet size (around 23 nm). The stability test determined the superior stability of the trans-cinnamaldehyde SMEDDS with constant trans-cinnamaldehyde content and z-average diameter of emulsion, under accelerated and heat stressed condition. Thus, we believe that this novel trans-cinnamaldehyde SMEDDS formulation has the potential to be applied for the development of trans-cinnamaldehyde medicines in the pharmaceutical industry.

• Tunnel and Underground Space
• /
• v.31 no.6
• /
• pp.508-519
• /
• 2021

In this study, a model was developed to predict the peak particle velocity (PPV) that affects people and the surrounding environment during blasting. Four machine learning models using the k-nearest neighbors (kNN), classification and regression tree (CART), support vector regression (SVR), and particle swarm optimization (PSO)-SVR algorithms were developed and compared with each other to predict the PPV. Mt. Yogmang located in Changwon-si, Gyeongsangnam-do was selected as a study area, and 1048 blasting data were acquired to train the machine learning models. The blasting data consisted of hole length, burden, spacing, maximum charge per delay, powder factor, number of holes, ratio of emulsion, monitoring distance and PPV. To evaluate the performance of the trained models, the mean absolute error (MAE), mean square error (MSE), and root mean square error (RMSE) were used. The PSO-SVR model showed superior performance with MAE, MSE and RMSE of 0.0348, 0.0021 and 0.0458, respectively. Finally, a method was proposed to predict the degree of influence on the surrounding environment using the developed machine learning models.