• Title/Summary/Keyword: 에러 교정 기법

Search Result 6, Processing Time 0.022 seconds

WBAN Service Quality Optimization Design Using Error Correction Technique (에러교정기법을 이용한 WBAN 서비스품질 최적화 설계)

  • Lee, Jung-Jae
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.14 no.4
    • /
    • pp.657-662
    • /
    • 2019
  • The power consumption of wearable sensors and electrocardiogram regulators should be very low to extend the network lifetime and anticipated QoS( : Quality of Service) control such as error correction and authentication of data processed by WBAN( : Wireless Body Area Network) nodes is important. Therefore, QoS control is the most urgent concern to implement WBAN in health monitoring regulations. For optimal QoS control, we compare the energy efficiency and the average number of transmissions with IEEE 802.15.6 and the error correction method considering energy efficiency. The performance of the proposed error correction technique shows that the energy efficiency and the transmission rate are improved by adjusting the coding rate appropriately using the channel estimation.

Adaptive Error Recovery in cdma2000 1xEV-DO Broadcast and Multicast Networks (cdma2000 1xEV-DO를 위한 모바일 브로드캐스트/멀티캐스트 네트워크에서의 능동적인 에러 교정 방법에 관한 연구)

  • Kang Kyungtae;Park Hosang;Cho Yongwoo;Shin Heonshik
    • Journal of KIISE:Information Networking
    • /
    • v.33 no.1
    • /
    • pp.91-102
    • /
    • 2006
  • We analyze the performance of MAC-layer Reed-Solomon error recovery in the cdma2000 1xEV-DO Broadcast and Multicast Services (BCMCSs) environment, with respect to the size of the ECB (Error Control Block) and the air-channel condition, and establish the relationship between ECB size, error recovery capacity and service latency. From this we propose an adaptive error recovery scheme which adjusts the size of the ECB to reflect the environment of the mobile nodes so as to meet the required service quality (target bit error-rate), while reducing the latency of real-time applications. Extensive simulation results show the effectiveness of our approach compared to the current static scheme. Proposed adaptive schemes achieves near optimal solution with respect to service latency while satisfying the required service quality.

A Utility-Based Hybrid Error Recovery Scheme for Multimedia Transmission over 3G Cellular Broadcast Networks (3G 방송망에서의 효율적인 멀티미디어 전송을 위한 유틸리티 기반 하이브라드 에러 복구기법)

  • Kang Kyung-Tae;Cho Yong-Jin;Cho Yong-Woo;Cho Jin-Sung;Shin Heon-Shik
    • Journal of KIISE:Information Networking
    • /
    • v.33 no.4
    • /
    • pp.333-342
    • /
    • 2006
  • The cdma2000 lxEV - DO mobile communication system provides broadcast and multicast services (BCMCS) to meet an increasing demand from multimedia data services. The servicing of video streams over a BCMCS network must, however, face a challenge from the unreliable and error-prone nature of the radio channel. The BCMCS network uses Reed-Solomon coding integrated with the MAC protocol for error recovery. We analyze this coding technique and show that it is not effective in the case of slowly moving mobiles. To improve the playback quality of an MPEG-4 FGS video stream, we propose the Hybrid error recovery scheme, which combines Reed-Solomon with ARQ, using slots which are saved by reducing the Reed-Solomon coding overhead. The target packets to be retransmitted are prioritized by a utility function to reduce the packet error rate in the application layer within a fixed retransmission budget. This is achieved by considering of the map of the error control block at each mobile node. The proposed Hybrid error recovery scheme also uses the characteristics of MPEG-4 FGS (fine granularity scalability) to improve the video quality even when conditions are adverse: slow-moving nodes and a high error rate in the physical channel.

A Study on the Optical Communication Channel using Forward Error Correcting Technique (순방향 에러 교정 기법을 이용한 광통신 채널에 관한 연구)

  • Kang, Young-Jin;Kim, Sun-Yeob
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.14 no.2
    • /
    • pp.835-839
    • /
    • 2013
  • In this paper, We operate at a relatively low BER or using forward error control coding techniques on ways to increase the capacity of optical communication systems research. Coding gain is defined as the ratio of the probability of the coded signal and coding of error signal. Coding gain is increased, partly because of the period, to reduce the value of the optimal coding of the signal error probability decreases because of the effective bit binary symbol duration is longer than can be ignored. Transmission capacity on the coding gain for various code rates, which show the extent of up to 75Gb/s transmission capacity to get through it was confirmed that these coding techniques.

A Study on Memory Protection for Embedded Systems (임베디드 시스템의 메모리 보호에 관한 연구)

  • Im, Do-Yeon;Park, Ik-Su;Oh, Byeong-Kyun;Gwun, Oh-Bong
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2005.11a
    • /
    • pp.1483-1486
    • /
    • 2005
  • 일반적으로 응용 프로그램의 메모리 요구를 배치 전에 평가하는 것은 많은 어려움이 따르기 때문에 주기억장치의 부족을 초래한다. 또한 임베디드 시스템의 디스크와 가상 메모리의 결핍은 out-of-memory 에러가 발생할 때 응용이 확장되기 위한 swap 공간이 없어 시스템이 붕괴되고 가상 기억장소로부터의 보호가 없어 세그먼트가 그 바운드를 초과했다는 것조차 발견되지 않으므로 붕괴 전의 교정 동작이 불가능하게 한다. 시스템 붕괴가 치명적인 손실이 될 수 있는 임베디드 시스템에서 Out-of-memory 에러는 비신뢰성을 보이는 중요한 원인이 된다. 본 논문에서는 컴파일러에 의한 런타임 조사 코드를 사용함으로써 out-of-memory 에러들이 발생하기 바로 전에 발견하는 런타임 조사와 out-of-memory 이후 죽은 변수 같은 사용되지 않는 공간과 살아있는 변수의 압축으로 자유롭게 된 공간으로 스택이나 힙 세그먼트를 확장시키는 공간 재활용과 데이터 압축 기법으로 시스템 신뢰성을 개선하는 방법을 연구하였다.

  • PDF

Analysis of Working Posture Using OWAS in Forest Work (산림작업(山林作業)에서 OWAS기법(技法)을 이용(利用)한 작업자세(作業姿勢) 분석(分析))

  • Lee, Joon Woo;Park, Bum-Jin
    • Journal of Korean Society of Forest Science
    • /
    • v.90 no.3
    • /
    • pp.388-397
    • /
    • 2001
  • In forestry, where improvement of labor environment is quite impossible, improved posture would result in direct effects by preventing waste of physical strength, prevention of accidental injury caused by fatigue accumulated on certain body parts, and prevention of human error by inattentiveness due to weakened body. Therefore, this research carried on analysis of working posture in manual forest work(thinning using chain-saw, salvage cutting using chain-saw, clearing using hand saw, clearance of twiner using sickle, pruning using saw with a long handle, and tending of young growth using sickle) using OWAS analysis system. According to the OWAS method, percentage of OWAS action categories III and IV in the tasks using chain-saw and sickle was higher than another tasks. For the compared middle skillful worker group and low skillful worker group at felling work using chain-saw, percentage of OWAS action categories IV in middle skillful worker group was 5.1%, and low skillful worker group was 14.1%.

  • PDF