• Journal of Radiation Protection and Research
• /
• v.21 no.1
• /
• pp.27-39
• /
• 1996

The change in spent fuel characteristics by DUPIC fuel cycle(burnup of spent PWR fuel again in CANDU) is examined with time elapse since discharge. Major characteristics examined include isotopic concentration, radioactivity, decay heat radiotoxicity and radiation source-term of spent fuel material, which is existing in a type of spent PWR and DUPIC fuel. Behaviors of major nuclides contributing to such changes are also analyzed in terms of radionuclide concentration. From the analysis, the change in radionuclide concentration by DUPIC shows approximately 2% decrease in actinides concentration and 20% increase in fission products concentration. Radioactivity and decay heat of spent DUPIC fuel does not depend upon radionuclides concentrations, which is a unique in sence of general characteristics of spent fuel. In terms of gamma spectrum, spent DUPIC fuel shows lower values than that of spent PWR fuel by 40 to 50% in the range of $0.01{\sim}0.575$ MeV but much higher over 3.5MeV. Neutron Intensities of both spent fuels are mainly determined by $({\alpha},\;n)$ reaction and spontaneous fission reaction of actinides. Of them, especially, the spontaneous fission reaction Is a major neutron source-term, which causes that neutron intensities of spent DUPIC fuel $having{\sim}3.3$ times higher Cm-244 concentration are ${\sim}4$ times higher than that of spent PWR fuel.

• Smart Media Journal
• /
• v.11 no.7
• /
• pp.76-84
• /
• 2022

In Korea, where rice is the staple food, there are many cases in which the nutritional composition of food is different at the same weight, even though the same ingredients are used and the food or food name is the same. The cause is closely related to the moisture content of the food according to the cooking method and cooking process. In order to design a diet tailored to individual health and supply accurate calories and nutrients, a method of expressing food data that is not affected by the cooking process or cooking method is required. Usually, the same ingredients or foods show a lot of deviation from the nutritional components presented in the standard food database due to the difference in moisture content. For this reason, there are problems that increase the complexity of the food ingredient database and the difficulty in using it. As a method to improve these problems, we would like to propose a food data expression method based on dry weight. As an example of this, the characteristics of rice as a food material and changes in major nutritional components according to the change in moisture of various rice-processed foods made from rice were considered. In addition, as an example of how to normalize food data through this, the dry weight-based nutrition label of rice was presented.

• Journal of Nutrition and Health
• /
• v.40 no.5
• /
• pp.451-462
• /
• 2007

This study was conducted to investigate breakfast consumption pattern in relation to diet quality and health outcomes of Korean adults. Data are from 2001 National Health and Nutrition Survey. Dietary information of 3406 adults aged $30{\sim}49$ years and their socio-demographic characteristics, blood lipid profile, fasting blood glucose, blood pressure, anthropometric measurements were analyzed. According to the breakfast consumption of the subjects, they were classified to breakfast skippers and eaters and the eaters' breakfast staple types were defined as RICE, BREAD, NOODLES, MIXED (mixed types including several grain-based dishes), and OTHERS. The proportions of breakfast consumption patterns were 18.4% for skippers, 71.1% for RICE, 2.6% for BREAD, 1.6% for NOODLES, 4.0% for MIXED, and 2.4% for OTHERS. Breakfast skippers had lower daily nutrients intake than breakfast eaters but their health outcomes did not differ from those of eaters. Instead, men with BREAD pattern had higher blood cholesterol and women in NOODLE pattern had higher blood glucose and lower HDL cholesterol. The BREAD pattern breakfast had higher energy contribution from fat and lower nutrient densities and the subjects in BREAD pattern had higher level of household income. Men's BREAD pattern breakfast consisted more animal products than that of women. There was high probability of undernutrition among women in NOODLE pattern and their mean household income was the lowest. From these results, in Korea, breakfast staple types have different food patterns and there was need for developing healthy food patterns appropriate to each staple type. The breakfast consumption pattern had influences on nutrient adequacy of the diet and health outcomes and seemed to represent socio-economic status. These could be used in doing nutrition education in community.

• Journal of The Korean Association For Science Education
• /
• v.35 no.3
• /
• pp.509-521
• /
• 2015

Argumentation is a social and collaborative dialogic process. A large number of researchers have focused on analyzing the structure of students' argumentation occurring in the scientific inquiry context, using the Toulmin's model of argument. Since SSI dialogic argumentation often presents distinctive features (e.g. interdisciplinary, controversial, value-laden, etc.), Toulmin's model would not fit into the context. Therefore, we attempted to develop an analytical framework for SSI dialogic argumentation by addressing the concepts of 'discourse clusters' and 'discourse schemes.' Discourse clusters indicated a series of utterances created for a similar dialogical purpose in the SSI contexts. Discourse schemes denoted meaningful discourse units that well represented the features of SSI reasoning. In this study, we presented six types of discourse clusters and 19 discourse schemes. We applied the framework to the data of students' group discourse on SSIs (e.g. euthanasia, nuclear energy, etc.) in order to verify its validity and applicability. The results indicate that the framework well explained the overall flow, dynamics, and features of students' discourse on SSI.

• Journal of the Korean Society for Railway
• /
• v.10 no.1 s.34
• /
• pp.23-37
• /
• 2007

Since 1964, HSR, which was opened in Japan, has had a hoge impact on the world. Historically, HSR has similar characteristics to the Roman Road, which promoted rapid movement and hada great influence on international society as transport infrastructure. Recently the development of HSR has become more rapid because of economic, environmental and external cost concern, emphasizing Environmentally Sustainable Transport(EST). In particular, the external cost has become more important factor for justifying HSR. The successful factors of HSR are high demand and cost minimal construction costs. There are two successful HSR models, the Japanese and the French. The former operates based on high demand oriented and the latter focuses on its minimizing costs. The demand orientated model means HSR carries over 100,000 passengers per day as in Japan and Far East Asian countries. The cost minimized model focuses on lower operation and construction costs as in France. In particular, Germany carries both passengers and freight on HSR. The construction costs in Germany are in between those of Japan and France. In future, Korea, Taiwan and China HSR will follow Japan's successful model because of high population density and concentration of economic activity along railway lines. This paper supports Vickerman's argument that HSR is justified where there is a demand of between 12 million and 15 million railway passenger a year(about 40thousand persons/day) between two urban center. This will be shown in the future in Korea, in Taiwan and China. Finally, this paper reviews that HSR activates at 250km/h for dedicated new lines and 200km/h for upgraded lines. In particular, it is successful in area of high population density and cost minimizing technology.

• Journal of Korea Port Economic Association
• /
• v.28 no.3
• /
• pp.27-44
• /
• 2012

The offshore wind farm is increasingly attractive as one of future energy sources all over the world. In addition, the capacity of an offshore wind turbine gets larger and its physical characteristics are big and heavy. In this regard, a special port is necessary to assemble, store, and transport the offshore wind systems, supporting to form the offshore wind farms. Thus, this study aims to provide a policy maker which evaluation factors can significantly affect to the optimal site selection of a offshore wind port. For this, Fuzzy-AHP method is applied to capture the relative weights. The results of this study can be summarized as follows. Five criteria in level I was defined such as the accumulation factor, the regional factor, the economic factor, the location factor, and the consortium factor. Of these, the accumulation factor(37.4%), the location factor(34.2%), and the economic factor( 24.5%) were analyzed by major factors. In level II, three assessment items of each factor were selected so that total fifteen items were formed. To sum up, the site selection of offshore wind port should consider the density of the wind industry, cargo volume of securing the economic operation of terminals, the development degree of offshore wind related industry, and the proximity to the offshore wind farms. In other words, the construction of offshore wind port should be paid attention to considering not only the proximity to offshore wind farms but also the preference of turbine manufacturing companies.

• Elastomers and Composites
• /
• v.45 no.1
• /
• pp.51-57
• /
• 2010

Cellulose nanowhiskers (CNW) gamered increasing interest for their remarkable reinforcement of polymer composites. In this work, we were to produce cellulose whiskers from commercially available microcrystalline cellulose (MCC) by acid hydrolysis with sulfuric and hydrochloric acids. Electron microscopy found that each acid produced sililar cellulose crystals of diameters ranging from 20 to 30 nm and lengths ranging from 200 to 300 nm. Moreover, all samples showed remarkable flow birefringence through crossed polarization filters. Conductometric titration of CNW suspensions revealed that the sulfuric acid treated sample had a surface charge of between 140.00 mmol/kg and 197.78 mmol/kg due to sulfate groups, while that of the hydrochloric acid treated sample was undetectable. Thermogravimetric analysis showed that the thermal decomposition temperature and apparent activation energy (evaluated by Broido's method at different stages of thermal decomposition.) of H1-CNW - prepared by hydrolysis with hydrochloric acid - was higher than those of S1-CNW and S2-CNW - prepared by hydrolyzing MCC with sulfuric acid.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_1
• /
• pp.1025-1032
• /
• 2018

Snow Cover is a form of precipitation that is defined by snow on the surface and is the single largest component of the cryosphere that plays an important role in maintaining the energy balance between the earth's surface and the atmosphere. It affects the regulation of the Earth's surface temperature. However, since snow cover is mainly distributed in area where human access is difficult, snow cover detection using satellites is actively performed, and snow cover detection in forest area is an important process as well as distinguishing between cloud and snow. In this study, we applied the Normalized Difference Snow Index (NDSI) and the Normalized Difference Vegetation Index (NDVI) to the geostationary satellites for the snow detection of forest area in existing polar orbit satellites. On the rest of the forest area, the snow cover detection using $R_{1.61{\mu}m}$ anomaly technique and NDSI was performed. As a result of the indirect validation using the snow cover data and the Visible Infrared Imaging Radiometer (VIIRS) snow cover data, the probability of detection (POD) was 99.95 % and the False Alarm Ratio (FAR) was 16.63 %. We also performed qualitative validation using the Himawari-8 Advanced Himawari Imager (AHI) RGB image. The result showed that the areas detected by the VIIRS Snow Cover miss pixel are mixed with the area detected by the research false pixel.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.3
• /
• pp.149-156
• /
• 2021

This study collected and analyzed case studies related with the use of spatial information in North Korea to prioritize construction and required supporting processes in order to propose a short-term and long-term road map for the establishment of spatial information in North Korea. Recent research cases related to the prioritization of spatial information development were analyzed, and priority for the construction of infrastructure was derived based on the interconnectedness and relationship of national infrastructure. Due to the inaccessibility and remoteness of North Korea, all of the five studies determined priorities according to questionnaires and consulting of refugees and knowledgeable figures by expert groups. In summary, priority was given to unarmed and transborder areas, major cities, special zones, and development zones, while in terms of facilities, priority was given to power communication, railroads, water and sewage architectural buildings, roads, and dams. In the case of prioritizing the establishment of national infrastructure for the unified Korean Peninsula, the development of major areas, ports, and the related city-level spots to develop a line that promotes the sharing of routes such as transportation networks, water, and energy, thus leading to a scenario involving the development of cotton at an urban and national level.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.2
• /
• pp.112-118
• /
• 2009

This paper proposes a rapid detection algorithm of a salient region for music video browsing system, which can be applied to mobile device and digital video recorder (DVR). The input music video is decomposed into the music and video tracks. For the music track, the music highlight including musical chorus is detected based on structure analysis using energy-based peak position detection. Using the emotional models generated by SVM-AdaBoost learning algorithm, the music signal of the music videos is classified into one of the predefined emotional classes of the music automatically. For the video track, the face scene including the singer or actor/actress is detected based on a boosted cascade of simple features. Finally, the salient region is generated based on the alignment of boundaries of the music highlight and the visual face scene. First, the users select their favorite music videos from various music videos in the mobile devices or DVR with the information of a music video's emotion and thereafter they can browse the salient region with a length of 30-seconds using the proposed algorithm quickly. A mean opinion score (MOS) test with a database of 200 music videos is conducted to compare the detected salient region with the predefined manual part. The MOS test results show that the detected salient region using the proposed method performed much better than the predefined manual part without audiovisual processing.