• Journal of the Korea Convergence Society
• /
• v.8 no.8
• /
• pp.41-49
• /
• 2017

The 'NIST Framework and Road Map for Smart Grid Interoperability Standards' proposes an architecture framework to secure the direction of development and standard interoperability of smart grid and provides a list of identified standard, standard cyber security strategies, and certification framework. In particular, SEP 2.0 and OpenADR 2.0 are the examples. SEP 2.0 and OpenADR 2.0 can functionally link HEMS and Smart Grid, but interoperability standards between the two protocols are not planned in above document. The OpenADR Alliance also announced that work is underway to define mapping tables for interoperability between OpenADR 2.0 and SEP 2.0, but no information is yet available. Therefore, In this paper, in developing energy efficiency improvement HEMS, we propose a mapping model that supports syntactic and semantic founded interoperability between SEP 2.0 and OpenADR 2.0b for ICT grid convergence based on the standard specification document of each protocol and confirmed through an example of the semantic mapping function based on the demand response service scenario.

• Journal of the Korean earth science society
• /
• v.31 no.6
• /
• pp.541-554
• /
• 2010

Fifteen min-microtremor data sets were collected at 136 sites from a coastal area of Kunsan and 117 sites from an inland area of Jeonju located in SW Korea, and were analyzed for the HVSR (Horizontal to Vertical Spectral Ratio) of the sites. The microtremor spectra of the coastal area have stronger energy in the lower frequency range from 1-6 Hz than those of the coastal area. This result can be attributed to the effect of the waves and tides in the Keum river and the Yellow sea. Twenty four hours of measurement of the microtremor indicated that the microtremor spectrum correlates with the human activities, but the microtremor HVSR peak was observed consistently at the characteristic frequency for the site. The HVSR peaks were grouped into 4 types -"single peak", "double peak", "broad peak" or "no peak"- based on their shapes. More than 90% of the data sets exhibit peak frequencies ($F_0$) which can be easily identified. The distribution of $F_0$ reveals a close relationship with the topography and local geology of the areas, exhibiting high F0s in the hillside areas and low $F_0s$ in the reclaimed land area. While the amplitudes of microtremor HVSR peak frequencies are less than 4 in the downstream of the inland area, those of the recently reclaimed land in the coastal area are extremely high (more than 10). The results of this study indicate that detailed HVSR studies are essential for the earthquake hazard reduction of reclaimed lands.

• Journal of KIISE
• /
• v.44 no.1
• /
• pp.107-113
• /
• 2017

Real-time multicasting is a packet transmission scheme ensuring that multiple destinations receive a packet within the desired time line. In wireless sensor networks, a packet can be delivered to a limited distance under a given deadline, since the end-to-end delay tends to be proportional to the end-to-end physical distance. Existing real-time multicasting protocols select the distance between the source and the furthest destination as the distance limitation and construct a multicasting tree guaranteeing delivery paths to each destination within the distance limitation. However, the protocols might lead to real-time delivery failures and energy efficiency degradation due to the fixed distance limitation. In this study, we proposed a real-time multicasting protocol using time deadline. The proposed protocol obtains the maximum transmittable distance with a given time deadline and subsequently constructs a multicasting tree using the maximum transmittable distance. The form of the multicasting tree varies according to the given time deadline to trade off the energy efficiency against the real-time delivery success ratio. The simulation results showed that the proposed scheme is superior to the existing protocols in terms of energy efficiency and real-time delivery success ratio under various time deadlines.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.3
• /
• pp.596-606
• /
• 2015

Recently, the government is promoting the new renewable energy spread and expansion policy. To this end, the investment and the research is ongoing on the core of the ESS (Energy Storage System) for the Smart Grid that is being spread around the industrialized countries. US and European countries have also conducted a variety of ESS related systems maintenance and improvement in order to induce the activation of the ESS industry. On the other hand, our country has no law and institutional foundation for the introduction of activation ESS, and there is no objective basis for the economic impact of the introduction of the ESS. Therefore, spread and activation of the ESS is not properly conducted. In this paper, the economics of the ESS based on the Korea electric pricing system for the spread and activation of the ESS effectively proposes a technique for analysis. To do this, define the ESS operating model, and propose the best economic analysis method economic analysis comparing each operating model.

• Journal of KIISE:Information Networking
• /
• v.34 no.6
• /
• pp.493-504
• /
• 2007

With the advance and proliferation of computer and wireless network technology, it is common to access to network through the wireless network using mobile device. The ratio of using the streaming media out of many applications through the network is increasing not only in the wired network but also in the wireless network. The streaming media is much bigger than other contents and requires more network bandwidth to communicate and more computing resources to process. However the mobile devices have relatively poor computing resource and low network bandwidth. If the streaming media service is provided for mobile devices without any consideration about the network bandwidth and computing power, it is difficult for the client to get the service of high quality. Since especially mobile devices are supported with very limited energy capacity from the battery, the streaming media service should be adjusted to the varying energy state of mobile devices to ensure the complete playback of streaming media. In this paper, we propose a new method to guarantee the complete playback time of the streaming media for the mobile clients by dynamically controlling transmitted frame rate to the client according to the estimated available time of mobile device using battery model reflecting the characteristic of the battery. Since the proposed method controls the number of frames transmitting to the client according to the energy state of the mobile device, the complete playback time is guaranteed to mobile clients.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.51-51
• /
• 2018

본 연구는 바이오에너지용 이질3배체 억새(Miscanthus ${\times}$ giganteus) 품종육성 위한 교배재료인 물억새(M. sacchariflrous)와 참억새(M. sinensis) 출수기 단축과 단교배 방법을 개발하기 위해 수행하였다. 물억새와 참억새를 12시간 일장, 자연일장 조건에서 재배하여 출수기 단축에 미치는 단일효과를 조사하였다. 출수기에 일중 화분 발아시간, 절단한 화분친 이삭 활력 유지 및 격리방법 등 단교배 방법을 구명하여 이를 활용한 억새의 자가 수정 여부를 조사하고 시험교배를 실시하였다. 참억새와 물억새 모두 12시간 일장의 단일 조건에서 재배한 것이 자연일장에 재배한 것에 비해 출수 소요일수가 18~27일 정도 단축되었다. 화분 발아는 물억새에서 오전 6시에 왕성하였으나 시간이 경과할수록 발아율이 낮아져 오전 8시에는 10% 이하만 발아하였다. 참억새 화분은 오전 6시에는 발아하지 않았으나 오전 7시에 50% 이상이 발아하였고 8시에는 물억새와 같이 10% 이하였다. 화분친 참억새 이삭을 절단, 절화 보존액에 꽂아 백색 부직포로 격리하였을 때 절화 보존액량이 많을수록 활력 유지 일수가 증가하여 150 mL에서 물억새, 참억새 모두 7일간 개화 및 화분 비산을 지속하였다. 이 때 화분 발아율은 참억새와 물억새 모두 4일까지 40%를 유지하였다. 참억새와 물억새는 자가수정율이 ~ 2.5%로 낮고, 자연교잡 임실율은 출수기가 빠른 유전자원에서 54.4%까지 높았다. 상기 단교잡 방법을 적용한 물억새 4배체와 참억새 2배체간 14조합 시험교배로 437립의 종자를 얻었다. 본 연구의 억새 종간 단교배 방법은 우수한 종자친과 화분친으로 교배종자를 얻을 수 있어 향후 바이오매스 수량이 많으면서, 종자가 맺히지 않은 이질 3배체 품종육성에 활용할 수 있을 것으로 판단된다.

• Journal of the Korean Magnetics Society
• /
• v.7 no.6
• /
• pp.299-307
• /
• 1997

NdFeB films have been grown onto Si(100) substrate by a KrF pulsed laser ablation of the targets of $Nd_xFe_{90.98-x}B_{9.02}$ (x=17.51~27.51) at the substrate temperature of 620~700 $^{\circ}C$ and the laser beam energy density of 2.75~5.99 J/$\textrm{cm}^2$. The films exhibit no preferred orientation, however, good hard magnetic properties were produced from as-deposited condition : $4{\pi}M_s$=7 kG, $4{\pi}M_r$=4 kG, and $H_c$=300~1000 Oe. The depositon rate was not greatly influenced by changing the substrate temperature, but it increases linearly by increasing the beam energy density. The beam energy density of 3 J/$\textrm{cm}^2$ gave the optimal condition to have the highest $4{\pi}M_r$ and $H_c$ as well. The higher content of Nd induces a higher coercivity and $4{\pi}M_r$ at the same time without prominent change in $4{\pi}M_s$.

• Journal of Animal Environmental Science
• /
• v.1 no.2
• /
• pp.125-136
• /
• 1995

To use the earth heat for the pig housing, an underground heat exchanger has constructed in depth of 2.5m and 20m length. The temperature of the outlet air was max. 8 kelvin higher than that of inlet air in winter season. In spite of the -7$^{\circ}C$ outside temperature, it could keep the air temperature from the earth tube above zero degree. The heating performance was maximum in value of 3.25Wh/㎥ and average of 1.75Wh/㎥ by the airflow volume of 340㎥/h. The slope of relative humidity from outlet air has shown gentler than that of inlet air. By using the underground heat exchanger, it would be possible to prepare an relatively uniform relative humidity in the swine stalls. The temperatures on the earth, where PVC pipes are buried, have shown 10~12$^{\circ}C$ on March. This can reduce the difference between day and night temperature during this season by using the underground heat exchanger.

• Applied Chemistry for Engineering
• /
• v.28 no.2
• /
• pp.214-220
• /
• 2017

The spherical Al/RDX/AP composites with an average size of $550{\mu}m$ were successfully prepared by drowning-out/agglomeration (D/A) process. The surface morphology and dispersion of Al particles of those composites were investigated using SEM and EDS (energy dispersive spectrometry). As a result of thermal analysis, the onset temperature of thermal decomposition of the Al/RDX/AP composites by the D/A process was found to decrease about $50^{\circ}C$ and their thermal stability was shown to be relatively enhanced due to the increase of activation energy compared to those of using the physical mixing method. In the first decomposition region of AP, Prout-Tompkins model was shown to describe well the thermal decomposition of both composites by the physical mixing and D/A process. On the other hand, in the second decomposition region of AP, the decomposition mechanisms of composites by the physical mixing and D/A process were explained by the zero-order and contracting volume model, respectively.

• Journal of Energy Engineering
• /
• v.7 no.1
• /
• pp.146-156
• /
• 1998

Fly ash produced in coal combustion is a fine-grained material consisting mostly of spherical, glassy, and porous particles. A physical, morphological, and chemical characteristic of fly ash has been analyzed. This study may contribute to the data base of domestic fly ash, the improvement of combustion efficiency, ash recycling and ash collection in the electrostatic precipitator. The physical property of fly ash is determined using a particle counter for the measurement of ash size distribution and gravimeter. Morphological characteristic of fly ash is performed using a scanning electron micrograph and an optical microscope. The chemical components of fly ash are determined using an inductively coupled plasma emission spectrometry (ICP). The distribution of fly ash size was ranged from 15 to 25 $\mu$m in mass median diameter. Exposure conditions of flue gas temperature and duration within the combustion zone of the boiler played an important role on the morphological properties of the fly ash such as shape, relative opacity, coloration, cenosphere and plerosphere. The spherical fly ash might be generated at the condition of complete combustion. The size of fly ash was found to be increased the with particle-particle interaction of agglomeration and coagulation. Fly ash consisted of $SiO_2\;Al_2O_3\;and\;Fe_2O_3$ with 85% and carbon with 3~10% of total mass.