• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.654-664
• /
• 2018

In this paper, this system is operated by PCS that is driven by being synchronized voltage fed inverter and AC source, and in the steady state of power source charge battery connected to DC side with solar cell using a photovoltaic (PV) that it was so called constant voltage charge. it can cause the effect of energy saving of electric power, from 10 to 20%. and through a normal operation of electric energy storage system (EESS). In addition, better output waveform was generated because of pulse width modulation (PWM) method, and it was Proved to test by experiment maintained constant output voltage regardless of AC source disconnection, load variation, and voltage variation of AC power source.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.194-198
• /
• 2021

LoRa is a physical layer technology that is designed to provide a reliable long-range communication with introducing CSS and with introducing a loco parentis tree network. Since a leaf can utilize multiple parents at the same time with a single transmission, PDR increases logarithmically as the number of gateways increases. Because of the ALOHA-like MAC of LoRa, however, the PDR degrades even under the loco parentis tree topology similarly to the single-gateway environment. Our proposed method is aimed to achieve SDMA approach to reuse the same frequency in different areas. For that purpose, it elaborately controls each TxPower of the senders for each message in concurrent transmission to survive the collision at each different gateway. The gain from this so-called capture effect increases the capacity of resource-hungry LPWAN. Compared to a typical collision-free controlled-access scheme, our method outperforms by 10-35% from the perspective of the total count of the consumed time slots. Also, due to the power control mechanism in our method, the energy consumption reduced by 20-40%.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.120-120
• /
• 2010

에너지 절약적 차원에서 한 대의 실외기에 다수의 실내기가 접속되는 개별공조형 멀티 열펌프에 관한 연구 및 개발과 보급이 증대되고 있다. 본 연구에서는 복수의 실내기를 갖고 가변속 압축기를 채용한 지열원 물대공기 멀티열펌프시스템을 학교 현장에 설치하여 제조사의 운전 제어 알고리즘에 따라 일일 냉난방 실증 성능 특성을 분석하였다. 2008년 9월 30일의 냉방부하가 낮은 일자에 대하여 시간에 따른 부하 변동에 따라 압축기의 용량가변으로 실내기 냉방용량은 정격용량 대비 17.1%에서 111.3%의 범위에서 변이되었으나, 열펌프 유닛의 일일 최대 COP는 6.2를 나타냈으며, 일일 평균 열펌프 유닛 COP는 4.5로 열펌프 유닛 인증 기준 이상의 성능을 나타냈다. 2008년 11월 10일 대비 2008년 12월 15일에는 시스템 가동 중의 평균 외기온도가 $9.6^{\circ}C$ 감소하였으나, 각 재실공간의 용도별 부분 부하특성으로 11월 10일 보다 난방 부하량이 작게 나타났다. 하지만, 12월 15일에는 부하량이 매우 작아서 11월 10일보다 잦은 압축기 가변에 따른 손실로 일일 평균 COP가 낮게 나타났다. 2009년 1월 12일에는 정격 용량대비 94%의 부하율로 11월 10일과 12월 15일 대비 4배 이상의 부하량으로 압축기 용량 가변율이 작아서 난방용량과 COP 변화율이 작게 나타났다. 2009년 1월 12일에는 지중순환수의 실외열교환기 유입온도가 2008년 12월 15일보다 감소하고, 시스템의 난방용량 증가로 상대적으로 응축기와 증발기 크기가 감소한 효과로 히트펌프 유닛 COP가 감소하였으나, 본 지열원 열펌프 제조사에서 생산하고 있는 본 지열원 시스템과 동일한 압축기 등을 채용한 동일 용량의 공기열원 열펌프의 1월 12일 외기온도 $-10^{\circ}C$에서의 열펌프 유닛 COP 대비 70% 우수한 성능을 나타냈다. 본 지열원 히트펌프의 2008년 11월 10일의 일일 평균 히트펌프 유닛 COP는 외기온도가 낮고 일일 부하량이 크게 나타난 1월 12일의 일일 평균 히트펌프 유닛 COP 대비 37% 높게 나타났으나, 지중순환펌프의 정속운전으로 시스템 요구 지중순환수 유량 증가에 따른 성능 향상보다 소비전력 증가 영향이 커서 1월 12일의 시스템 COP 보다 33.3% 작은 값을 나타냈다. 본 연구의 용량 가변형 압축기를 채용한 지열원 멀티 히트펌프 유닛을 지열원 냉난방 시스템의 히트펌프 유닛으로 사용할 경우 시스템 최적화를 통한 시스템 COP 향상과 연간에너지 절감을 이루기 위해서는 히트펌프의 용량 변화 시에 지중순환펌프의 순환 유량 최적화를 위한 효율적 운전 제어 알고리즘 개발이 요구된다.

• Journal of Bio-Environment Control
• /
• v.4 no.2
• /
• pp.131-135
• /
• 1995

In winter, most of the energy for a greenhouse crop is supplied during the night. Since watermelon is grown under high night temperature, the experiments were set up to investigate night temperature influence on watermelon in order to obtain the best economic output. Day temperatures ranged from $25^{\circ}C$ and 3$0^{\circ}C$ ; night temperatures ranged from 2$0^{\circ}C$ to 3$0^{\circ}C$ at 5$^{\circ}C$ interval. Two cultivars of watermelon(Citrullus vulgaris S. ‘Binna’ and ‘Kamro’) treated with 30/3$0^{\circ}C$ yielded maximum leaf areas, flowers and leaf numbers. 30(14h)/25(10h)$^{\circ}C$ or 30(12h)/25(12h)$^{\circ}C$ grown plants had higher germination ratio and more dry weight and chlorophyll than those of 30/3$0^{\circ}C$ which were the highest temperature integral. Although 25/$25^{\circ}C$ and 30/2$0^{\circ}C$ regime are same average temperature, the growth of watermelons at 30/2$0^{\circ}C$ was significantly higher than 25/$25^{\circ}C$. ‘Binna’ was growing more than ‘Kamro’ at the same temperature. Leaf area ratio(LAR) was reduced with increasing DIF temperature from 30/3$0^{\circ}C$ to 30/2$0^{\circ}C$, but leaf weight ratio(LWR) was increased.

• Korean Journal of Plant Resources
• /
• v.13 no.3
• /
• pp.162-170
• /
• 2000

This study quantified the effects of urban greenspace on microclimate amelioration and atmospheric $CO_2$ reduction for several residential districts selected in Korea and Japan. The study also explored fire obstruction by urban trees to develop systematic planting guidelines. Transpiration by a Zelkova serrata tree (diameter at breast height: 15 cm) in a day of August equaled cooling effect of about 3 air conditioners running for 12 hours. Average air temperature for the growing season was 0.5$^{\circ}C$ and 1.2$^{\circ}C$ cooler, respectively, in districts with 12% and 22% cover of woody plants than in a district with no vegetation. Annual $CO_2$ uptake and $O_2$ production by woody plants were 3 times greater in a district which was 2 times higher in their cover. Woody plants played, in a district with their 22% cover, an important role through offsetting total $CO_2$ emission from the district by about 3% annually, and through producing 10% of annual $O_2$ requirement by all residents within the district. Appropriate planning strategies of residential greenspace, including species selection, planting layout, greenspace enlargement, and maintenance were suggested to improve microclimate amelioration, air purification, and fire obstruction.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.8
• /
• pp.922-929
• /
• 2007

The complete oxidation of ammonia to nitrate is a distinctive two-step process divided into the oxidation of ammonia to nitrite(nitritation) by Nitrosomonas and the oxidation of nitrite to nitrate(nitratation) by Nitrobacter. The nitrogen removal via nitrite accumulation offers several advantages such as saving costs for aeration, saving carbon source and finally reduction of sludge discharge. In this work a suspended bioreactor coupled with membrane filtration(MBR) was used to find the process conditions of nitrite build-up. The MBR enables to reach sufficient nitrifying bacteria in the bioreactor, although the autotrophic bacteria can be easily washed out due to their lower growth rate. The dissolved oxygen concentration $c'_{O2}$ and ammonia concentration $c_{NH3}$ in the reactor were varied and investigated as parameters for nitrite accumulation. As a result the higher ammonia concentration in the reactor is very effective for starting nitrite build-up and the effect was strengthened in combination with lower dissolved oxygen concentration. With lower $c'_{O2}<0.3$ $mgL^{-1}$ $O_2$ and high $c_{NH3}=6.3\sim14.9$ $mgL^{-1}$ $NH_3N$ the 74% of the nitrite accumulation was achieved. Specially, it was found that the nitrite accumulation could occur not only in biofilm reactor as many references showed but also in the membrane bioreactor carried out in this study.

• Environmental and Resource Economics Review
• /
• v.28 no.2
• /
• pp.231-276
• /
• 2019

This paper analyzed the impact of the penetration of EV(electric vehicle) and FCEV(fuel cell electric vehicle) into the automobile industry, using a static CGE approach. There are contrasting view on the economic impact of EV/FCEV penetration: negative economic impact due to shrunken intermediate inputs versus positive impact because of input saving technical progress. Regarding environment, there is no clear consensus whether EV or FCEV will contribute to the reduction of $CO_2$ emissions in Korea. This study attempts to provide an answer to these questions. By giving shocks to the input coefficients of automobile industries and automobile using sectors, as well as to the final demands for energies. we integrated the Bass diffusion model into the CGE framework, The result suggests that the EV penetration has adverse impact on the $CO_2$ emission while the FCEV penetration has positive impact. On the other hand, both EV and FCEV have positive impacts on GDP. When considering automobile manufacturing sectors only, adverse impacts on $CO_2$ are demonstrated both for EV and FCEV. However, since the size of $CO_2$ increase is small, these results does not alter the overall effects.

• Clean Technology
• /
• v.28 no.1
• /
• pp.18-23
• /
• 2022

Using air as an insulator due to its low heat transfer coefficient has been studied and has been widely commercialized to save energy in the field of thermal insulation technology. In this study, we analyzed the heat insulating effect of hollow silica nanoparticles mixed in non-uniform size, and the maximum heat insulating efficiency of these particles given the limited number of particles that can be mixed with a medium such as paint. The hollow silica nanoparticles were synthesized via a sol-gel process using a polystyrene template in order to produce an air layer inside of the particles. After synthesis, the particles were analyzed for their insulation effect according to the size of the air layer by adding 5 wt % of the particles to paint and investigating the thermal insulation performance by a heat transfer experiment. When mixing the particles with white paint, the insulation efficiency was 15% or higher. Furthermore, the large particles, which had a large internal air layer, showed a 5% higher insulation performance than the small particles. By observing the difference in the insulation effect according to the internal air layer size of hollow silica nanoparticles, this research suggests that when using hollow particles as a paint additive, the particle size needs to be considered in order to maximize the air layer in the paint.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2009.11a
• /
• pp.236-238
• /
• 2009

에너지 절약차원에서 냉방을 줄여 지구온난화 방지에 일조하고자 여름철에 가벼운 차림의 의복을 권장하는 쿨비즈 캠페인이 시작되었으나 이의 정량적인 효과를 분석하는 연구가 미흡하였다. 본 연구에서는 여름철 온실가스 줄이기 및 직장인 등의 건강증진 등을 위하여 기후복장 적응형에 대한 범국민 인식 및 실천 필요를 바탕으로, 실험을 통해 쿨비즈에 의한 생리적 반응 측정 및 주관적 감각평가를 실시하였다. 1 차실험은 두 복장(전통의복,기후의복)의 피부온 측정실험으로, 환경온 25, $27^{\circ}C$, 상대습도 50% RH 에서 20 대 성인남성 4 명을 대상으로 실험을 하였다. 피험자는 심신을 안정할 수 있도록 30 분간의 안정기를 가진 후에 60 분 동안 실험을 하였으며, 사무실 내 작업환경과 같은 분위기 조성을 위해 편안하게 의자에 앉아 가벼운 대화나 컴퓨터 워드작업 및 설문을 응할 수 있도록 피험자 앞 책상 위에는 노트북을 설치해 두었고, 실험 진행기간 동안 피부온, 직장온, 습도, 발한량, 열화상 카메라, 온열감, 습윤감, 쾌적감 등과 같은 주관적 감각을 측정하였다. 2 차 실험은 동일 피부온 발현하는 환경온 찾기로 기준온도($27^{\circ}C$)에서 전통복장을 입고 온도를 점진적으로 하강시키면서 $27^{\circ}C$ 기후 복장을 입은 상태의 피부온도와 동일해지는 실내온도를 측정한다. 착의 형태에 따른 피부온도 변화에서 환경온도 $25^{\circ}C$ 전통의복 기후의복에 의한 피부온도의 차이는 전통의복이 최소 0.3~최대 $1.6^{\circ}C$ 더 높게 나타났으며, 환경온도 $27^{\circ}C$에서 전통의복 기후의복에 의한 피부온도의 차이는 대체적으로 전통의복이 최소 0.4~최대 $1.0^{\circ}C$ 더 높게 나타났다. 주관적 감각평가에서도 기후의복보다 전통의복에서 온열감 습윤감 불쾌감이 더 높은 경향을 보였다. 주관적 감각으로는 $25^{\circ}C$ 전통의복과 $27^{\circ}C$ 기후의복에서 중립적인 느낌을 나타냈다.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.1
• /
• pp.126-133
• /
• 2008

Current changing to the customer-oriented market naturally causes suppliers to meet an age of competition on the quality. In order to plan housing meeting this quality competitiveness era, I set up the type classification system of quality differentiation for the unit of apartment housing by executing differentiation cases of unit quality and type analysis of the object. The system is consist of 3 classification systems by quality element, user convenience element and product element as follows: First element is to classify quality element on the basis of plane and interior elements, architectural elements and second one is user convenience element relating facility to classify environment-oriented, safety, energy saving and convenience. The other one is the product element to classify furniture, installing product and convenient product. I believe that this classification system will be useful to determine any classification elements of product for product positioning and product planning in the stage of marketing planning of apartment housing in the future.