• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.477-477
• /
• 2016

하천 내 식생에 의한 유속차이는 활발한 에너지 교환에 기인하며 하천 내 흐름 변화에 큰 변화를 가져온다. 또한 식생에 의한 하천 침식과 퇴적의 반복은 하천 지형 변화의 대표적인 원인 중 하나이다. 따라서 본 연구에서는 소하천을 대상으로 관목류(버드나무류)를 식재하여 식생유무 및 밀도 차이에 대한 흐름패턴 및 유속 변화를 분석하였다. 식생은 고밀도(식생 수 : $38/m^2$)와 저밀도(식생 수 : $10/m^2$)로 구분하였으며 유속 측정은 ADCP와 micro-ADV를 이용하여 비교하였다. 실험 유량은 식생 침수 정도에 따라 부분침수($0.5m^3/s$), 완전침수($3.7m^3/s$)로 나누어 실험을 수행하였다. 실험결과 ADCP와 ADV에 의한 유속값은 유사하게 나타났으며 고밀도일수록 식생에 의한 항력으로 인해 느린 흐름을 보였다. 또한 부분침수 시 식생 내 수심 증가로 인한 흐름 변화가 발생하였으며 완전침수 시에도 식생 유무 및 밀도에 따라 흐름 패턴이 바뀌는 것으로 나타났다. 향후 이 연구는 하천 침식 등을 고려한 수목식재 계획 수립에 기초자료로 사용될 수 있으며 다양한 식생을 대상으로 조도계수 변화, 흐름특성 분석 등이 추가적으로 연구되어야 할 것으로 판단된다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.568-571
• /
• 1997

The overall aim of this paper is to determine coupling loss factor using loss factor and structural loss factor. For this purpose, two kinds of loss factor were adopted. One is loss factor of each sub structure, another is structural loss factor based on the complex welded or assembled structure. Using these two parameters, it is possible to derive the coupling loss factor which represent characteristic condition of SEA theory. Coupling loss factor of conjunction in complex structure was expressed as power balance equation. The derived equation for a coupling loss factor has been simplified on the assumption of one directional power flow between two sub structures. Using these conditions, it is possible to find the coupling loss factor equation. The comparison between theory of power transmission on conjunction and above equation, show a good agreement in simple beam structure. To check the effectiveness of above equation, it was adopted rotary compressor. Rotary compressor has three main conjunctions between shell and internal vibration part. This equation was applied to find out the optimum welding point with respect to reduce the noise propagation. It shows the effective tool to evaluate the coupling loss factor in complex structure.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.471-478
• /
• 2002

초음파를 사과의 비파괴 품질판정에 이용하기 위한 기초연구로서 계측된 저장기간에 따른 사과의 초음파 특성과 본 연구에서 계측된 사과의 기계적 특성을 이용하여 초음파에 의한 사과의 탄성계수 및 생물체항복강도 예측모델을 개발하고자 하였으며, 결론은 다음과 같다. 1. UTM을 이용하여 사과의 기계적 특성치를 분석하여 생물체항복점, 생물체항복변형량, 생물체항복강도, 파괴점, 극한변형량, 극한강도 및 탄성계수 등을 구하였다. 2. 사과의 기본 물성, 초음파 특성과 기계적 특성값 들을 분석한 결과 사과의 질량, 체적, 시간영역의 진폭(PTP), 제3영역 에너지 스펙트럼 밀도함수가 기계적 특성 중 생물체항복강도, 탄성계수와 높은 상관성이 있는 것으로 나타났다. 3. 사과의 저장 기간, 질량, 체적, Peak-to-peak, 제3영역의 에너지값 등 5개의 독립변수를 가지는 다중선형회귀모형으로 사과의 탄성계수 및 생물체 항복강도 예측모형을 개발하였다.

• Journal of the Korean Society of Radiology
• /
• v.17 no.4
• /
• pp.531-539
• /
• 2023

Self-absorption is the most important factor affecting the accuracy of gamma spectroscopy measurements in environmental samples. In particular, it is affected by other factors such as the chemical composition of the sample, geometric shape, thickness, density, atomic number, distance between the sample and detector, energy of the emitted gamma photon, and humidity coefficient or percentage in the sample. To test the calibration method, a 450 ml CRM standard source (9 nuclide) Marinelli beaker was used. Five soil samples among environmental samples were measured by density by applying the corrected values. Therefore, it can be seen that the self-absorption value is more effective for somewhat large and low photon energy. In the case of environmental samples, it was confirmed that the overall energy peak efficiency through self-absorption of the source greatly depends on the density of the sample.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.3
• /
• pp.209-216
• /
• 2008

In the present study, a mathematical model has been formulated for the performance of polymer electrolyte fuel cells. Modify the concentration polarization equation using concentration coefficient that represents the characteristics of bipolar plate reactant distribution. The model predictions have been compared with experimental results and good agreement has been demonstrated for the cell polarization curves. The effects of operating parameters on the performance of fuel cells have been studied. Increases of operation pressure reduce the effect of temperature on the performance.

• Journal of Korea Foresty Energy
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2006

This study was conducted to develope allometric equations and to estimate biomass, stem density, and biomass expansion factor for the three stand age classes (I-II, III-IV, and V-VI) of Japanese larch (Larix leptolepis) in Gapyeong area. Total dry weight (kg/tree) and aboveground biomass (ton/ha) were 57.8 and 71.1 for I-II class, 185.4 and 195.6 for III-IV class, and 1047.9 and 180.6 for V-VI class, respectively. Total above and belowground biomass (ton/ha) was 96.3 for I-II class, 265.7 for III-IV class, and 244.5 for V-VI class. The proportion (%) of stem to total biomass increased with stand age class and was 53.9 for I-II class, 55.7 for III-IV class, and 57.7 for V-VI class, respectively, while that of foliage decreased and was 7.1 for I-II class, 4.5 for III-IV class, 2.3 for V-VI class. Ratios of root to aboveground biomass were 0.35 for all age classes. Stem density ($g/cm^3$) differed between I-II class and III-VI class. Aboveground and total biomass expansion factors were 1.31-1.44 and 1.26-1.94. Our results showed that differences in stand density with stand age classes might influence allometric equation, stem density and ratios of aboveground biomass to stem biomass and total biomass to stem biomass (biomass expansion factors).

• Journal of Korean Society of Disaster and Security
• /
• v.10 no.2
• /
• pp.21-28
• /
• 2017

Wind turbulence data is required for engineering calculations of gust speeds, mean and fluctuating loading. Spectral densities are required as input data for methods used in assessing dynamic response. This study is concerned with the estimation of daily instantaneous maximum wind velocity in the meteorological major cities (selected each 6 points) during the yearly 1987-2016.12.1. The purpose of this paper is to present the power spectral densities of the daily instantaneous maximum wind velocity. In the processes of analysis, used observations data obtained at Korea Meteorological Adminstration(KMA), it is assumed as a random processes. From the analysis results, in the paper estimated power spectral densities function(Blunt model) shows a very closed with von Karman and Solari's spectrum models.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.1
• /
• pp.53-58
• /
• 2007

In an estuary, mixing and transport of contaminant sometimes occurs in the salt finger favorable condition (Hwang ang Rehmann, 2004). Linearized theory is applied to predict flow dynamics in salt finger favorable condition. The simulated results match well with previous laboratory experiments. When the density ratio is larger than 2, the heat and salt system shows $0.55{\sim}0.57$ as Turner (1967) found, and the salt and sugar system produces 0.87 of Griffiths (1980). As the ratio of molecular diffusivities of two scalars increases, the flux ratio increases. The flux and eddy diffusivity ratios decrease with increase of density ratio, and it takes longer time for flux ratio to be steady state at the higher density ratios.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.385.2-385
• /
• 2002

Hermetic rotary compressor is one of the most important components for air conditioning system since it has a great effect on both the performance and the noise and vibration of the system. Noise and vibration of rotary compressor is occurred due to gas pulsation during compression process and unbalanced dynamic force. In order to reduce noise and vibration, it is necessary to identify sources of noise and vibration and effectively control them. (omitted)

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.1
• /
• pp.33-39
• /
• 2003

Interior parts of a vehicle are getting important to reduce interior noise. Therefore, prior analysis of cabin noise related with interior parts are necessary at first design stage. Recently, Statistical Energy Analysis(SEA) has been suggested as a possible way for high frequency range noise analysis of interior parts. The validity of noise analysis with SEA to interior parts has been preyed by comparing with experimental result, and the developed method with SEA has been applied in finding optimized interior parts package.