• Journal of Energy Engineering
• /
• v.25 no.1
• /
• pp.131-144
• /
• 2016

Damage occur frequently around the world on climate change and the main cause of greenhouse gas emissions regulation is growing. To this end, the government has built integrated management system for national building energy. The building energy information is total 6.8 million complex. Integrated management system for national building energy database are matched building registers information and energy information of the supply agencies. However, the matching process has its limitations so advanced work is in progress continuously. This study analyzed integrated management system for national building energy database quality and limitations and deduce improvement plan to increase system reliability and availability. The existing database matching average rate is 85.6%. 58.2% of the total non-matching data type has no building information. To ensure the ease of new database matching and the accuracy of the existing database matching, address standarization and building properties system are needed between building information and energy information. Also, The system construction is required to include information on other energy sources like petroleum energy which has high proportion of non-urban areas and small residential areas and renewable energy which has high potential in development and utilization.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.2
• /
• pp.96-103
• /
• 2003

This paper describes a method for sinusoidal modeling of audio signals using perceptually weighted matching pursuit. Matching pursuits extracts iteratively the greatest energy signals from the input signals until the residual between the original and the reconstructed signal is zero. In this paper, perceptual matching pursuits using psychoacoustic model to matching pursuit extracts greatest perceived energy iteratively. To evaluate the performance of the perceptual matching pursuits it is compared with the sinusoidal matching pursuits which is not included perceptual weighting. For various audio signals the result of simulation shows that the perceptual matching pursuit is superior to the sinusoidal matching pursuits, especially for a high change rate in time domain it can synthesized original signal.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.107-110
• /
• 2015

In this paper, we propose a coalitonal game theoritic approach to the power control problem in resource-constrained wireless sensor networks, where the objective is to enhance power efficiency of individual sensors while providing the QoS requirements. We model this problem as two-sided one-to-one matching game and deploly deferred acceptance procedure that produces a single matching in the core. Furthermore, we show that, by applying the procedure repeatedly, a certain stable state is achieved where no sensor can anticipate improvements in their power efficiency as far as all of them are subject to their own QoS constraints. We evaluate our proposal by comparing them with cluster-based and the local optimal solution obtained by maximizing the total system energy efficiency, where the objective function is non-convex.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.233-235
• /
• 2019

에너지 하베스팅은 주변의 에너지를 수확하여 활용하는 기술로 이에 관련한 연구가 여러 분야에서 활발히 진행되고 있다. 마찰전기 나노발전기는 물리적인 움직임이나 마찰을 통해 발생되는 정전기를 이용하여 센서나 웨어러블 디바이스에 활용하는 에너지 하베스팅 기술 중 하나이다. 마찰전기 나노발전기는 ${\mu}W$(마이크로와트) 단위의 미소 전력을 생산함에도 불구하고, 다른 에너지 하베스팅 발전기들과 비교하여 큰 임피던스를 가지고 있어서 전력을 전달하기에 어려움이 있다. 또한 마찰전기 나노 발전기의 출력 전력은 Spike성 Pulse Train의 형태여서 다이오드 정류기가 필요하기 때문에, 정류기의 입력 임피던스와 마찰전기 나노 발전기의 출력 임피던스에 대한 분석을 이용한 임피던스 매칭 설계가 필요하다. 본 연구에서는 다이오드 정류기의 임피던스 모델을 유도하여 마찰전기 나노 발전기의 내부 임피던스와의 매칭을 통해 최대 전력을 전달하는 커패시터와 출력 부하 설계를 목표로 한다. 유도한 임피던스 모델에 대하여 실제 전력 실험을 통해 모델의 유효성과 정확성을 검증하고자 한다.

• Korean Journal of Remote Sensing
• /
• v.38 no.3
• /
• pp.283-298
• /
• 2022

As Synthetic Aperture Radar (SAR) image can be acquired regardless of the weather and day or night, it is highly recommended to be used for Automatic Target Recognition (ATR) in the fields of surveillance, reconnaissance, and national security. However, there are some limitations in terms of cost and operation to build various and vast amounts of target images for the SAR-ATR system. Recently, interest in the development of an ATR system based on simulated SAR images using a target model is increasing. Attributed Scattering Center (ASC) matching and template matching mainly used in SAR-ATR are applied to target classification. The method based on ASC matching was developed by World View Vector (WVV) feature reconstruction and Weighted Bipartite Graph Matching (WBGM). The template matching was carried out by calculating the correlation coefficient between two simulated images reconstructed with adjacent points to each other. For the performance analysis of the two proposed methods, the Synthetic and Measured Paired Labeled Experiment (SAMPLE) dataset was used, which has been recently published by the U.S. Defense Advanced Research Projects Agency (DARPA). We conducted experiments under standard operating conditions, partial target occlusion, and random occlusion. The performance of the ASC matching is generally superior to that of the template matching. Under the standard operating condition, the average recognition rate of the ASC matching is 85.1%, and the rate of the template matching is 74.4%. Also, the ASC matching has less performance variation across 10 targets. The ASC matching performed about 10% higher than the template matching according to the amount of target partial occlusion, and even with 60% random occlusion, the recognition rate was 73.4%.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.501-502
• /
• 2016

매칭 회로는 유도성전력을 소나시스템에 공급함으로써 에너지 손실과 소나시스템의 크기를 줄일 수 있다. 이 논문에서는 적응 정합회로라고 불리는 가변인덕터로 구성된 기본적인 매칭회로의 토폴로지를 제시하였다. 전력회로는 소나시스템에서 사용되는 범위의 주파수와 전력에 기반하여 설계되었다. 또한 제시된 정합회로의 특성을 시뮬레이션을 통해 증명하였다.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.5
• /
• pp.137-145
• /
• 2011

BIM Data exchange using standard format can provide a user friendly and practical way of integrating the BIM tools in the life cycle of a building on the currently construction industry which is participated various stakeholder. It used IFC format to exchange the BIM data from Design software to energy analysis software. However, since we can not use the material name data in the library of an energy analysis directly, it is necessary to input the material property data for building energy analysis. In this paper, to matching the material named of name of DOE-2 default library, rhe extracted material names from BIM file are inferred by the ontology With this we can make the reliable input data of the engine by development a standard data and also increase the efficient of building energy analysis process. The methodology can enable to provide a direction of BIM-based information management system as a conceptual study of using ontology in the construction industry.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.2
• /
• pp.99-105
• /
• 2017

Generally, stereo matching methods are used to estimate depth information based on color and spatial similarity. However, most depth estimation methods suffer from the occlusion region because occlusion regions cause inaccurate depth information. Moreover, they do not consider the temporal dimension when estimating the disparity. In this paper, we propose a temporal stereo matching method, considering occlusion and disregarding inaccurate temporal depth information. First, we apply a global stereo matching algorithm to estimate the depth information, we segment the image to occlusion and non-occlusion regions. After occlusion detection, we fill the occluded region with a reasonable disparity value that are obtained from neighboring pixels of the current pixel. Then, we apply a temporal disparity estimation method using the reliable information. Experimental results show that our method detects more accurate occlusion regions, compared to a conventional method. The proposed method increases the temporal consistency of estimated disparity maps and outperforms per-frame methods in noisy images.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.173-174
• /
• 2013

전기장만으로 에너지를 전송하는 전계결합형 비접촉 충전기술은 송수신부를 매개하는 AC링크를 구성하는 전극쌍의 정전용량확보에 한계가 있으므로, 이를 잘 활용하기 위한 송수신회로가 요구된다. 따라서 본 논문에서는 이를 감안하여 전계결합형 에너지전송에 적합한 매칭변압기를 사용한 E급 송수신회로 구조를 제안한다. 제안된 구조에서 AC-링크 캐패시터의 낮은 정전용량을 감안한 최적 설계방식을 제안하고 회로설계에 따른 성능을 모의실험을 통해 예측한다.

• Journal of IKEEE
• /
• v.26 no.4
• /
• pp.686-692
• /
• 2022

In this paper, the matching error rates of modified area-based, energy-based algorithms, and learning-based structures were compared for stereo image matching. Census transform (CT) based on region and life propagation (BP) algorithm based on energy were selected, respectively.Existing algorithms have been improved and implemented in an embedded processor environment so that they can be used for stereo image matching in mobile systems. Even in the case of the learning base to be compared, a neural network structure that utilizes small-scale parameters was adopted. To compare the error rates of the three matching methods, Middlebury's Tsukuba was selected as a test image and subdivided into non-occlusion, discontinuous, and disparity error rates for accurate comparison. As a result of the experiment, the error rate of modified CT matching improved by about 11% when compared with the existing algorithm. BP matching was about 87% better than conventional CT in the error rate. Compared to the learning base using neural networks, BP matching was about 31% superior.