• Annual Conference of KIPS
• /
• 2010.04a
• /
• pp.243-246
• /
• 2010

최근 정보량의 급격한 증가로 데이터센터는 점차 대형화되고 있으며, 통합적으로 관리/운영되기 위해서는 전산실내 적절한 온도와 습도의 유지가 필수적이므로, 전산실내 에너지의 사용 효율을 극대화하기 위한 연구가 꾸준히 이루어지고 있다. 이 연구에서는 국내 공공부문의 대형 전산실을 모델로 선정하여 전산실 내 서버의 위치, 용량 그리고 냉각시스템 등을 고려하여 전산실내 열/유동특성을 수치적으로 규명함으로써, 에너지 효율 극대화를 추구하고 전력을 절감하여 저탄소 녹색성장과 그린IT 환경을 구축 하고자 한다. 이를 위하여 실제 측정한 환경 데이터를 바탕으로 전산유체역학(CFD)을 이용하여 3차원 비압축성, 정상상태의 열/유동특성을 예측한다. 또한 기존 및 개선된 전산실에 대한 비교결과를 바탕으로 새로운 열/유동조건을 도출하며, 이를 통하여 전산실 운영에 필요한 에너지 효율향상 방안을 제안하고자 한다. 연구 결과, 전산실 천장의 냉기유입부분과 열기배출부분으로 나뉘어 냉복도와 온복도를 형성하며, 내부 서버와 기타 각종 장비들의 발열 등으로 부분적인 열섬(Thermal island)현상이 나타났다. 이러한 열섬현상을 줄이고, 전산실내 환경을 최적화하기 위하여 찬공기 유입부분의 속도, 배출구의 유량, 그리고 냉/온 복도의 역할 변경 등 여러 가지 가능한 매개변수에 대한 연구가 필수적이다. 또한, 서버에서 발생한 고온의 공기를 배출하는 것이 전산실 내 적절한 온도구현에 효과적이며, 열섬현상을 방지하기 위해서는 이 부분에 차가운 공기의 유입이 필요하다는 것을 알 수 있었다.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.04a
• /
• pp.175-180
• /
• 2009

According to an increasing demand of political support and development on renewable energy as a solution for the energy problem in Korea, the government has established a goal to raise renewable energy supply from 2.27% to 5% until 2011. Especially in the case of public building in which energy use is in great demand, it would bring a great advantage to develop and utilize the Photovoltaic System as an electric energy and Geothermal Heat Pump System as a thermal energy. On the occasion of Photovoltaic System, Photovoltaic module can be used as an architectural material so that it can reduce construction cost and when we use solar energy, it is possible to make building's own power supply. As for Geothermal Heat Pump System, It can be used infinitely as long as the solar energy exist and operation cost is cheap and yearly efficiency is stable. However, we need to make a plan to reduce early investment expanses for these two renewable energy systems and to expand a diffusion rate as we develop a competitive domestic technology level. So in this study, we are going to perform evaluation of economical efficiency according to the introduction of Photovoltaic System and Geothermal Heat Pump System in public buildings which will be built up inside of Daegu Sin-seo innovation city. As a first step, we will investigate present installation condition of these two renewable energy systems and based upon that, will seek efficient introduction program of renewal energy systems that can be applied in public buildings.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.4
• /
• pp.175-182
• /
• 2007

Geothermal-energy has been getting popular as a natural energy source for green buildings these days. As a result Geothermal Source Heat Pump System (GSHPs) was being recognized effective alternative systems to conventional heating and cooling systems owing to their higher energy utilization efficiency. But GSHPs has not been popularized thereby the large amount of initial cost of the system and insufficiency of studies for economic estimation. Therefore GSHPs are being developed to make up for the weak points that are the large amount of initial cost of the system and much annual electricity consumption. In this paper, economic estimation was conducted by payback period method and it shows that the pay back period of Heat Storage Type GSHPs was calculated 6.8 years compared with the absorption Chiller-Heater system and 8.2 years compared with the Ice storage-Boiler system. Heat Storage Type GSHPs also has the lower annual source energy consumption than the conventional heating and cooling systems because of using nighttime electricity.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.174-174
• /
• 2003

ZnO는 상온에서 3.36 eV의 wide band gap과 60 meV의 큰 엑시톤 결합 에너지를 가지며, GaN(28 meV)와 ZnSe(19 meV)와 같은 wide band gap 재료와 비교해서 가장 우수한 exciton emission을 가진다. 이러한 특성 때문에 UV 레이저 및 LED와 같은 광학소자로서 그 응용의 잠재성이 높다. 박막의 우수한 광학적 특성과 결정성을 개선하기 위해 다양한 공정조건(RF 파워, 공정압력, 산소분압, 온도)에서 마그네트론 스퍼터링을 이웅하여 Si 기판상에 ZnO 박막을 성장 하였다. 또한, 저온 self-buffer를 이용하여 박막의 광학적 특성과 결정성을 더욱 개선 할 수 있었다. RF 파워와 공정압력은 박막의 PL(phothluminescehce) 특성이나 결정성에는 큰 영향을 주지 않았고 산소분압은 PL intensity의 변화를 가져왔으며, 온도는 결정성에 큰 영향을 주었다. 산소 분압이 증가 할수록 비화학량론적(산소 공공, 침입형 아연) 결함으로 인한 visiable 영 역의 peak 의 강도가 감소하는 것을 관찰하였다. 온도가 증가할수록 박막의 결정성에 나쁜 영향을 주었는데 저온 self-buffer를 도입하므로써 ZnO 박막의 결정성과 PL특성을 함께 개선하였다.

• Journal of Internet of Things and Convergence
• /
• v.10 no.2
• /
• pp.43-50
• /
• 2024

This manuscript proposes an artificial intelligence-based(AI) energy platform system that efficiently use existing energy than creating new energy than creating new energy sources. To this end, it collects public information data portal and statistics data portal and data emissions, including energy usage and greenhouse gas emissions, including energy consumption and greenhouse gas emissions.In addition, it provides strong security and personal information protection functions to overcome the limit of existing energy platform. Through the built energy platform, improving power supply and user convenience of users and users to contribute to global warming issues.In this paper, the contents to implement the contents of the system, and improvement direction from the future completion and improvement direction.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.2
• /
• pp.32-43
• /
• 2014

This study set out to identify the importance of each factor influencing facility selection with a survey among public medical facilities under the category of public buildings and apply the importance of economy, technology and environment with the weighting factor method, thus proposing optimal application plans. The research content of each section can be summarized as follows:1) Estimated energy consumption according to the energy simulation was 65,129MWh/yr, which was 18.7% higher than that according to the calculation equation. Of the energy consumption, more than 80% was used by heating and cooling facilities and construction facilities, and 20% was used by electronics such as medical equipments and in and outdoor lighting. 2) The results of a survey on the factors influencing the importance when selecting a new and renewable energy system reveal that the upper items had a priority in economy, environment, and technology in the descending order and that the lower item shad a priority in initial investments, maintenance and repair costs=energy costs, supply reliability, energy efficiency and $CO_2$ emissions in the descending order. 3) The application alternatives were analyzed in economy, technology, and environment. As a result, a geothermal system turned out to be the most excellent one a cross all the upper and lower comparison items. Of the other systems, a solar thermal system was superior in initial investments, maintenance and repair costs, and energy efficiency, where as a photovoltaic system was superior in energy costs, supply reliability, and $CO_2$ emissions. 4) As for the mixed application ratio among economy, technology, and environment, when the percentage of a geothermal system was approximately 80% or higher in anew and renewable energy system, it was the best and most optimal application plan.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.1
• /
• pp.56-66
• /
• 2012

This study evaluated the economic benefits by comparing Cooling-Heating System with the existing system in the public library. The building's annual energy consumption was measured by adding the figures of the absorber chillers, the air conditioners and heaters in the building. The total amount of annual energy consumption was 143.51RT in air-conditioning and 83.66RT in heating. So, We made the capacity of geothermal heat pumps three 50RTs in order to check up this system. In order to estimate each construction and equipment cost and to evaluate economical efficiency, LCC(Life Cycle Cost) method was used and the service life of the building was sixty years. The result of analysis was that the geothermal cooling-heating system was more efficient than the existing system in public library.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.2
• /
• pp.108-116
• /
• 2013

Recently, there is the growing concern about the environment and energy. Such concern has been seen in the field of building. In this study, Analysis was performed about a variety of techniques that can be applied to the building sector. By conducting a survey of expert, Characteristics of each technology and each Building types application are certificated. As a result, The application of renewable energy in buildings and determine the characteristics of each technology are presented. Based on these results, the selection method of the efficient technologies that take advantage of the building of the project from the planning stage are expected.

• Journal of Korean Society of Disaster and Security
• /
• v.5 no.2
• /
• pp.81-87
• /
• 2012

Critical infrastructures (energy, information technology and communications, banking, transportation, public government services, etc.) are now more vital to modern society. Citizens, businesses and governments all rely on an array of interlinked physical and information infrastructures to satisfy their needs and perform their daily operations. At the same time, these infrastructures are becoming increasingly interdependent, such that failure of one of them can often propagate and result in domino effects. Recent dramatic episodes, from 9/11 to the Madrid train bombings, the April 2010 ash cloud the power cuts in Korea in 2011, and the cyber-attacks have highlighted the need for a comprehensive, internationally coordinated policy for the protection of critical infrastructures. For the purposes of this report, we define critical infrastructure as infrastructure whose failure would result in substantial damage to society and/or the economy.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.28 no.1
• /
• pp.83-95
• /
• 2020

The economic issue of the period of return versus investment has emerged to efficiently utilize the thermal energy of public resource recovery facilities using waste and private thermal source facilities using BIO-SRF. Accordingly, the optimum temperature and pressure facilities are required beyond the traditional designed, constructed and operated. In this study, we analyzed current energy output by different heat and pressure model in domestic facilities, and calculated the characteristics of green-house gas emission. In order to, utilize the thermal energy producing facilities using waste and biomass fuel more efficiently, it is temperature and pressure, which will lead to more lucrative investment and return as well.